Instruction/ maintenance manual of the product GPFMN Vermont Casting
Go to page of 16
1 Vermont Castings Gas Patio Fire INST ALLER / CONSUMER SAFETY INFORMA TION PLEASE READ THIS MANUAL BEFORE INST ALLING AND USING APPLIANCE IMPORT ANT : Installation of natu- ral gas should be completed by a qualified installer , service agency or gas supplier .
2 Vermont Castings Gas Patio Fire T able of Contents General Information ............................................... 2 Specifications ......................................................... 3 Assembly & Installation .........................
3 Vermont Castings Gas Patio Fire GPF Dimensions 11 ¹⁄₂ " (292mm) 5" (127mm) 12" (305mm) 3 ¹⁄₄ "(83mm) 16 ¹⁄₄ " (413mm) 11 ³⁄₈ " (289mm) 8 ¹⁄₄ " (210mm) Burner 4237 Fig. 1 Physical dimensions.
4 Vermont Castings Gas Patio Fire Assembly and Installation The logs and burner assembly are shipped together . 1. Remove the gas log set and burner assembly and check for damage. DO NOT install damaged compo- nents. The logs are fragile - handle with care.
5 Vermont Castings Gas Patio Fire Enclosures for LP Gas Supply Systems If you build an enclosure for an LP gas cylinder , follow these recommended specifications. Y ou must also follow local codes. Enclosures for LP gas supply cylinders shall be ventilated by openings at the level of the cylinder valve and at floor level.
6 Vermont Castings Gas Patio Fire Installation of GPF in Optional V illa Base The Villa Base is designed as a decorative enhance- ment for use with the Gas Patio Fire. T ools required: 7/16”, 3/4” and 1 1/16” wrenches, phillips screwdriver . Installation Instructions 1.
7 Vermont Castings Gas Patio Fire Installation of GPF on Optional Chalet Base The Chalet Base is designed as a decorative enhance- ment for use with the Gas Patio Fire. T ools required: 7/16”, 3/4” and 1 1/16” wrenches, phillips screwdriver . Installation Instructions 1.
8 Vermont Castings Gas Patio Fire 3. Place volcanic rock evenly around and on burner pan if you have not already done so. (Fig. 10) 4. Place log C1 on burner , using locator pins and holes in bottom of log. (Fig. 1 1) Log C1 LG162a Fig. 1 1 Place log C1 on locator pins onburner .
9 Vermont Castings Gas Patio Fire Optional GPF Cover Assembly 1. Lay all parts on the floor . 2. Attach all three frame stands to the top and bottom rings using bolts and nuts provided. (Fig. 16) T op Ring Bottom Ring Frame Stands FP1 164 Fig. 16 Attach frame stands to top and bottom rings.
10 Vermont Castings Gas Patio Fire Operation Upon completing the gas line connection, a small amount of air will be in the lines. When first lighting the burner , it will take a few seconds for the lines to purge themselves of this air . Once the purging is complete, the burner will light and operate as indicated in the instruction manual.
11 Vermont Castings Gas Patio Fire 1. The appliance should be inspected before initial use and inspected and cleaned at least annually by a qualified field service person. 2. T ampering is DANGEROUS and voids all warran- ties. Any component that is found to be faulty , must be replaced with an approved component.
12 Vermont Castings Gas Patio Fire 1 ab c d e f 2 3 4 5 6 8 7a,b 9 4237 V ermont Castings, Majestic Products reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without notice.
13 Vermont Castings Gas Patio Fire Accessories The following accessories for these appliances are available from your local V ermont Castings, Majestic Products distributor . Each accessory comes with a separate installation instructions for the particular appliance.
14 Vermont Castings Gas Patio Fire.
15 Vermont Castings Gas Patio Fire LIMITED W ARRANTY & EXTENDED LIFE TIME PROTECTION For V ermont Castings Gas Appliance Products* BASIC W ARRANTY The V ermont Castings Majestic Products company (.
16 Vermont Castings Gas Patio Fire 410 Admiral Blvd. • Mississauga, Ontario, Canada L5T 2N6 • 905-670-7777 www.majesticproducts.com • www .vermontcastings.
An important point after buying a device Vermont Casting GPFMN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vermont Casting GPFMN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vermont Casting GPFMN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vermont Casting GPFMN you will learn all the available features of the product, as well as information on its operation. The information that you get Vermont Casting GPFMN will certainly help you make a decision on the purchase.
If you already are a holder of Vermont Casting GPFMN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vermont Casting GPFMN.
However, one of the most important roles played by the user manual is to help in solving problems with Vermont Casting GPFMN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vermont Casting GPFMN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
