Instruction/ maintenance manual of the product HGS-15 THX Ultra , HGS-18 THX Ultra 2 Velodyne
Go to page of 10
Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax Web: www.velodyne.com Service E-mail: service@velodyne.
15 ☞ FOR YOUR RECORDS. . . DATE PURCHASED _______________________________________ DEALER _________________________________________________ SERIAL # ________________________________________________ *NOTE: Please complete and return your warranty card within ten (10) days or Register.
SPECIFICATIONS HGS-15 THX Ultra 2 HGS-18 THX Ultra 2 Cabinet (H/W/D) 19.5" x 18" x 17" 23.5" x 21.25 x 18.5" Frequency Response 18Hz - 120Hz +/- 3 dB 15Hz - 120Hz +/- 3 dB Harmonic Distortion less than .
13 ☞ Troubleshooting & Service ––––––––––––––––––––––––––––––––––––––––––––––——————–––––– If you should experience a problem with the operation of your subwoofer, please check all of the following before seeking service.
1 ☞ Congratulations! –––––––––––––––––––––––––––––––––––––––––––––––—————– Congratulations on your purchase of a Velodyne subwoofer system. This system represents the absolute state of the art in accurate low frequency reproduction.
2 ☞ Product Features & Controls ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– • 15" (12.7" piston diameter) or 18" (15.
3 ☞ Important!!! Do not use both LINE LEVEL and SPEAKER LEVEL connections simultaneously! Volume control This control allows you to balance the output from the subwoofer to the main speakers/ amplifier in your system. This control should be set to achieve similar output level from both the main speakers and subwoofer when listening to music.
4 ☞ A bypass switch is also provided if you wish to use an external crossover. If you are not using an external crossover, we recommend that you use the one provided within the unit for optimum perf.
External remote jack This connection allows an auxiliary infrared remote receiver "eye" to be installed and placed where most convenient. This option is usually only required when the subwoo.
Line-level connection ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––—— Figure 1 shows connection to a pre-amplifier's main outputs and returning them to your amplifier inputs.
An important point after buying a device Velodyne HGS-15 THX Ultra , HGS-18 THX Ultra 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne HGS-15 THX Ultra , HGS-18 THX Ultra 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne HGS-15 THX Ultra , HGS-18 THX Ultra 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne HGS-15 THX Ultra , HGS-18 THX Ultra 2 you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne HGS-15 THX Ultra , HGS-18 THX Ultra 2 will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne HGS-15 THX Ultra , HGS-18 THX Ultra 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne HGS-15 THX Ultra , HGS-18 THX Ultra 2.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne HGS-15 THX Ultra , HGS-18 THX Ultra 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne HGS-15 THX Ultra , HGS-18 THX Ultra 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
