Instruction/ maintenance manual of the product DPS-10 Velodyne
Go to page of 14
User's Man ual Audio/Video Subwoofer System Manuel de l'Utilisateur Système d’enceintes d’extrêmes graves audio/vidéo DPS-10 and DPS-12 TM TM DPS-10 and DPS-12 TM TM.
Caution To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
continued. . . 2 ☞ 2 ☞ Congratulations! Congratulations on y our purchase of a V elodyne Digital P o w er Slot (DPS) subwoof er system. This system represents the state-of- the-ar t in low frequency reproduction. Read and f ollo w the instruc- tions below to insure saf e and proper system oper ation.
3 ☞ 3 ☞ • Over e xcursion protection • Slot loaded design Installation Y our ne w subwoof er system provides f or a number of installation options. Read all the installation inf or mation belo w in order to de- ter mine which installation option is best f or your system.
continued. . . 4 ☞ 4 ☞ The f ollo wing tab le indicates m usical style and which preset is recommended f or it. Night Mode Night mode limits the maximum output of the subwoof er for later night listening or to be more considerate of close neighbors .
5 ☞ 5 ☞ achie v e similar v olume le vel from betw een both the main speak- ers and subwoof er . When pressing v olume up or do wn, the speed at which the pow er light b links indicates subwoof er v olume - the f aster the b linking, the louder the unit pla ys.
continued. . . 6 ☞ 6 ☞ (1) LO W -P ASS CROSSO VER Use this knob to select the high-frequency range at which y ou wish to cut off the signal to the subwoof er . When the knob is tur ned all the wa y to the left, the Subwoof er Direct f eature is in vok ed and the subwoof er plays all frequencies up to 200 Hz.
7 ☞ 7 ☞ Rear Panel Connections - Detailed Explanation Your new subwoofer is equipped with both speaker-level and line- level inputs. Use the RCA/Phono type “INPUT” jacks when con- necting your subwoofer to a pre-amp, signal processor, or line-level crossover.
continued. . . 8 ☞ 8 ☞ Speaker Level Output When connected in this f ashion, y our satellite speakers will be crossed o v er at 80 Hz. This remov es the lo wer bass from your satellites, enab ling them to do a better job reproducing high frequencies and giving y our receiver’ s amp more headroom (up to 50% more po wer).
9 ☞ 9 ☞ subwoof er and turn it counterclockwise to the “DIRECT” position. This will eliminate the inter nal crossov er from the signal path. Note: If not using an e xter nal crossov er , you should use the b uilt-in crossov er f or optimal perf or mance.
10 10 Caution! This subwoof er has electronics b uilt into the cabinet. Do not place the cabinet ne xt to sources of heat such as fur nace registers , radiators , etc. Do not place the unit near sources of e xcessiv e moisture, such as e v aporativ e coolers , humidifiers, etc.
The f ollowing conditions require service by a qualified technician: 1. The pow er cord has become damaged. 2. The unit does not appear to operate normally or e xhibits a marked change in perf or mance. 3. The unit has been e xposed to w ater . 4. Some part of the cabinet or circuitry is physically damaged.
Other V elodyne Subw oof er Pr oducts: 12 12 TM Digital Drive 1812 Signature Edition TM TM Deco System Deco System Deco Satellites TM Digital Drive Series DD-10 DD-12 DD-15 DD-18 HGS-X Series HGS-10X HGS-12X HGS-15X DLS Series DLS-3500 DLS-3750 DLS-4000 VX-10 LIMITED WARRANTY VELODYNE ACOUSTICS, Inc.
“OK, so ho w does this Digital Dr iv e subwoof er sound? In a word, fab u - lous. ” . . . .“V elodyne’ s New Digital Drive Series is a huge advance in subwoof er technology .
An important point after buying a device Velodyne DPS-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne DPS-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne DPS-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne DPS-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne DPS-10 will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne DPS-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne DPS-10.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne DPS-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne DPS-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
