Instruction/ maintenance manual of the product AIRPRO VEC259 Vector
Go to page of 8
THIS MANUAL CONT AINS IMPORT ANT INFORMA TION REGARDING SAFETY , OPERA TION, MAINTENANCE AND STORAGE OF THIS PRODUCT . BEFORE USE, READ AND UNDERST AND ALL CAUTIONS, W ARNINGS, INSTRUCTIONS AND PRODUCT LABELS. F AILURE TO DO SO COULD RESULT IN INJURY AND/OR PROPER TY DAMAGE.
1 NOTE: This product is shipped in a par tially charged state. Before use, charge batter y using AC method for 24 hours. IMPOR T ANT SAFETY INFORMA TION Be sure to read and understand all W ARNINGS and CAUTIONS before using this product.
4 The compressor on/off switch controls operation of the compressor . It can be conven iently depressed and released to control inflation. An exact pressure is obtained by obse rving the gauge and releasing the trigger when the correct pressure is ach iev ed.
6 The DC power adapter has a fused DC plug and connecting cord stored inside the DC power adapter . T o use the DC power adapter , first remove the DC plug from it’ s storage in the adapter . Remove the cord from storage, and connect the DC power adapter to the compressor .
8 IMPORT ANT: Always leave the tire chuck thumb latch in the open position when storing unit. 6.2 INFLA TE OTHER ARTICLES (WITHOUT V ALVE STEM) Inflation of items, others than tires, requires use of one of the nozzles (adapters).
10 FIGURE 6 Approximate continuous runtimes on a fully charged batter y are: Spotlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 hours Fluorescent light . . . . . . . . . . . . . . . . . . . . . . . . . . .
12 FIGURE 6 - LANTERN LIGHT PAR TS REPLACEMENT 9.2 QUARTZ HALOGEN BULB REPLACEMENT The bulb is a 15 watt, 12 volt, G4 projection type. This type bulb has two connector pins that plug into a socket. The procedure follows: 1. Unscrew the bezel (counterclockwise) and remove the bezel and lens.
14 11. SPECIFICA TIONS FOR COMPRESSOR: Batter y . . . . . . . . . . . .12 volt, 3 Amp hour , non-spillable, sealed lead acid Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260 PSI maximum W eight . . . . . . . . . . . . . .
An important point after buying a device Vector AIRPRO VEC259 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vector AIRPRO VEC259 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vector AIRPRO VEC259 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vector AIRPRO VEC259 you will learn all the available features of the product, as well as information on its operation. The information that you get Vector AIRPRO VEC259 will certainly help you make a decision on the purchase.
If you already are a holder of Vector AIRPRO VEC259, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vector AIRPRO VEC259.
However, one of the most important roles played by the user manual is to help in solving problems with Vector AIRPRO VEC259. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vector AIRPRO VEC259 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
