Instruction/ maintenance manual of the product V-037 Vax
Go to page of 12
UK SERVICE & HELP - VA X CARE 0870 6061248 Mon-Fri. 9.00am to 5.00pm. An answer phone is available out of these hours. If you have queries or concerns about using your VAX, call the HELPLINE. Calls ar e charged at the UK national rate. Please make a note of the serial number and model number of your V AX before calling.
2 1 Hanging loop 2 V ac on/off button 3 V ac on/off lock 4 Mid-handle grip 5 Cleaning solution tank 6 Dust canister release button 7 Dust canister 8 Mop head 9 V acuum cleaner nozzle 10 Cleaning pads .
3 To assemble the handle: Insert the handle into the body of the unit and push down firmly until it locks into place. Be sure to line up the button on the handle with the notch on the body , to help guide the lower handle into the body . The pin should be visible in the hole on the body .
Storage R ecommended use Use the storage hook to hang the cleaner up. NOTE: Hang in a place convenient for charging. Use the dry vacuum to remove loose dirt and debris from floors. W et mop by dispensing the cleaning solution and using an absorbent pad to remove dirt and grime.
5 Operating the V ac ‘n’ Mop FOR ADVICE ON CLEANING SOLUTIONS AND ABSORBENT CLEANING P ADS, PLEASE CALL V AX CARE ON 0870 6061248. NOTE: This product is intended for dry pick up only . Do not attempt to vacuum up any liquids with this cleaner . Prepare V ac’n’Mop Lift the vacuum nozzle.
6 Operating the V ac ‘n’ Mop Prepare V ac’n’Mop Unscrew the cap from the top of the cleaning solution tank. Mix one cupful of the Multi Hard Floor cleaner per litre of water and pour into the solution tank. Replace the cap on the solution tank.
7 Operating the V ac ‘n’ Mop V acuum Mop To turn the vacuum on: Push the on/off button down (a). To lock the vacuum on : Slide the lock button forwar d (b) . Pull back with the thumb to unlock. To dispense the solution: Pull the trigger on the back of the handle (c) .
Dust canister and filter: removal IMPORT ANT : FOR BEST RESUL TS, CLEAN THE FIL TER AFTER EACH USE. FOR ADVICE ON FIL TER REPLACEMENT , PLEASE CALL V AX CARE ON 0870 6061248 NOTE: This product is intended for dry pick up only .
9 Dust canister and filter: removal Return the filter to the filter protector and return to the dust canister . Re-attach by aligning the tab on the dust canister with the slot on the body of the unit. Tilt and push the dust canister until it locks into place.
T roubleshooting PROBLEM Cleaner won’t run Cleaner won’t pick-up/loss of suction Cleaner won’t spray solution Dust escaping from cleaner POSSIBLE REASONS 1. Battery not charged. 2. Handle not pushed into housing. 3. Battery dead - won’t hold a char ge.
Safety • Do not use or charge the unit outdoors. • Do not allow to be used as a toy . Close attention is necessary when used by or near children. • Use only as described in this user guidel. • Use only the manufacturer’ s recommended attachments.
EEC ST ATEMENT OF COMPLIANCE Manufacturer/EEC importer: VAX Limited, hereby on our own responsibility declare that the product V ac ‘n’ Mop is manufactured in compliance with the following: Safety: 72/23/EEC Low Voltage Directive as modified by 93/68/EEC EMC: 89/336/EEC Electromagnetic compatibility Directive as modified by 93/68/EEC VA X Ltd.
An important point after buying a device Vax V-037 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vax V-037 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vax V-037 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vax V-037 you will learn all the available features of the product, as well as information on its operation. The information that you get Vax V-037 will certainly help you make a decision on the purchase.
If you already are a holder of Vax V-037, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vax V-037.
However, one of the most important roles played by the user manual is to help in solving problems with Vax V-037. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vax V-037 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
