Instruction/ maintenance manual of the product V-008 Vax
Go to page of 9
V ax Car eline: 0870 6061248 Instruction Manual Please read car efully before using this cleaner . Always fully extend the mains cable before use. www .vax.co.uk BAGLESS UPRIGHT V ACUUM CLEANER V ax Model Number: V -008 BAGLESS UPRIGHT V ACUUM CLEANER V ax Model Number: V -008SP Vax V-008S 6th.
1 Hand grip 2 Handle 3 T urboT ool™ 4 Crevice tool (inside extension tube) 5 Extension tube 6 Dirt container lid 7 Dirt container 8 HEP A filter 9 Brushbar height adjuster 1 0 Headlight 1 1 Furnitur.
4. Clip T urboT ool™ on t o t he f ro nt of t he T urboT ool™ caddy (Fig.3/4). 5. Wrap the lower hose around the back of the hose caddy (Fig.3/5A). Push hose tube down into the right side of cleaner (Fig.3/5B). 6. Slide the dusting brush on to the post on the upper tool caddy with bristles facing out (Fig.
T o Operate Self-Propelled Featur e (V -008SP only) 1. For everyday use, engage the self-propelled feature by turning the switch up to “ON” position (Fig.4/6A). Grasp hand grip and push vacuum cleaner (Fig.4/6B). 2. “Self-Propelled” feature will work as the vacuum cleaner is pushed forward and pulled backwar d (Fig.
9 Rotating Brushbar: Removal & Replacement/Lightbulb: Removal & Replacement 5. Empty the dirt container completely (Fig.6/4). 6. Each time the dirt container is emptied, the filter should be cleaned. T ap the filter firmly against the side of a rubbish bin until the dust stops falling from the fil ter .
11 10 Lightbulb: Removal & Replacement/Clearing Blockages T roubleshooting 3. Secure the headlight lens by replacing the two (2) screws (Fig.8/3). 9. Clearing Blockages WARNING: T o reduce the risk of injury from moving parts, unplug before servicing.
13 11. T echnical Specification V oltage: 220-240V ~50Hz W attage: 1500W Nom. 1700W Max. Capacity: 3.1 litres max Filters: Fibre pr e-motor filter Pleated paper HEP A filter Cord length: 9.5m Weight: 9.0kg Subject to technical change without notice. T roubleshooting/UK Service & Help/T echnical Specification 12 10.
14 15 This page has been intentionally left blank. This page has been intentionally left blank. Vax V-008S 6th.qxd 4/6/05 11:29 AM Page 14.
EEC ST A TEMENT OF COMPLIANCE Manufacturer/EEC importer: V ax Limited, hereby on our own responsibility , declare that the products V -008 Performance and V -008SP Performance Self-Propelled are manuf.
An important point after buying a device Vax V-008 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vax V-008 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vax V-008 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vax V-008 you will learn all the available features of the product, as well as information on its operation. The information that you get Vax V-008 will certainly help you make a decision on the purchase.
If you already are a holder of Vax V-008, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vax V-008.
However, one of the most important roles played by the user manual is to help in solving problems with Vax V-008. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vax V-008 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
