Instruction/ maintenance manual of the product TRAX353 Univex
Go to page of 132
TRAX353 In-Car Na viga tion OWNER’S MANU AL.
P age 2 Contents What Do I Do First? 6 Make Sure These Items Arrived in the Box 6 Plug it in 7 How Do I Put It in My Car? 8 Safety considerations 8 Attaching the windshield mount 9 Adjusting the winds.
P age 3 Returning to normal navigation 35 Selected location (Cursor) 36 Original position in the Cursor menu 36 Daytime and night colour schemes 37 Colour scheme in tunnels 37 Route calculation and re.
P age 4 Creating a multi-point route (inserting a via point) 61 Creating a multi-point route (appending a new destination) 62 Editing the route 62 View the whole route on the map (Fit-to-Screen) 63 W .
P age 5 Route menu 93 Manage menu 94 Manage saved route 95 Manage History 95 Manage T rack Logs 96 Manage Favourites 97 Manage POIs 97 Managed Saved Search Criteria 99 User Data management 100 Setting.
P age 6 What Do I Do First? Make Sure These Items Arrived in the Box If any thi ng lis ted he re is mis sing or da mag ed, co nta ct you r p lac e o f purchase immediately . TRAX353 GPS n A v i G A T i o n d e v i c e Press the power ► button momentarily to turn the screen off (or back on); the device stays on and can still give directions.
P age 7 What Do I Do First? i n c l u d e d A c c e S S o R i e S Plug it in ► Connect the power adapter to the power connector on the lower right side of the device. Plug the other end into your car ’s cigarette lighter ► (or any standard 12 V DC outlet).
P age 8 How Do I Put It in My Car? Safety considerations Don’t install any device where it will block your view (including your ► mirrors!) while you’re driving. Keep your attention on the road! ► Don’t try to operate or focus on any device while you’re driving.
P age 9 How Do I Put It in My Car? Attaching the windshield mount Inser t the bracket hooks into the notches on the bottom of the device . 1 ...and snap the top hook into the notch on top of the device .
P age 10 How Do I Put It in My Car? A d j u S T i n G T h e W i n d S h i e l d m o u n T The adjustment lock keeps both the bracket and the suction cup ► locked into place.
P age 11 How Do I Put It in My Car? Mounting on the windshield Make sure the device does not block your view of the road or your mirrors. Once you decide where you want the device, hold the suction cup in that position, then adjust the mount so you have the best view of the device.
P age 12 How Do I Put It in My Car? Mounting on a at surface If you want to put the device somewhere other than your windshield (or anywhere the suction cup won’t stick), you can use the anchor disk. Once you glue the anchor disk down, the windshield mount installs inside the disk just like it does on glass.
P age 13 How Do I Put It in My Car? Hold the disk 4) exactly above the spot where you want to glue it down. (Remember , the glue is designed to be permanent!) Pressthediskrmlyagainstthesurface.Pushdownalongthe 5) edges, too, so that every part of the disk makes good contact with the surface.
P age 14 How Do I Use It? 1: W arnings and Safety information TRAX353isanavigationsystemthathelpsyoundyourwaytoyour destination with a connected GPS receiver . TRAX353 does not transmit your GPS position; others cannot track you.
P age 15 How Do I Use It? T asks Instructions Double tapping the screen Y ou do not need to tap the screen twice for any action. With buttons and controls, a single tap is enough. T apping and holding the screen Y ou do not need this to access the basic navigation functions.
P age 16 How Do I Use It? Gestures (drag&drop) Y ou do not need gestures to access the basic navigation features. Y ou need to drag and drop the screen only in cases like: Moving the handle on a slider . Moving the map: grab the map, and move it in the desired direction.
P age 17 How Do I Use It? The typical way of using TRAX353 is to select a destination, and start navigating. Y ou can select your destination in the following ways (not all of them are available in Simple mode): • Usetheselectedlocationonthemap(theCursor)(page35).
P age 18 How Do I Use It? T ype of action A vailable in Simple mode A vailable in Advanced mode Explanation Navigating to a selected map point Y es Y es See page 46 Navigating to a street address Y es.
P age 19 How Do I Use It? Route Planning options Y es Y es See page 104 Regional settings Only language selection Y es See page 106 W arnings No Y es See page 109 Hardware button (Power on/off) Y ou can use TRAX353 mostly by tapping the touch screen. The device has only one hardware button for turning power on or off.
P age 20 How Do I Use It? Icon Shows status information. Some icons also function as a button. T ap them once. List When you need to select from several options, they appear in a list. T urn the page with the and buttons and tap the value that you want.
P age 21 How Do I Use It? Using keyboards Y ou only need to enter letters or numbers in TRAX353 when you cannot avoidit.Y oucantypewithyourngertipsonthefull-screenkeyboards and you can switch between various keyboard layouts, for example ABC, QWERTY , or numerical.
P age 22 How Do I Use It? Using the map The map screen is the most frequently used screen of TRAX353. It can be accessed from the Navigation menu by tapping .
P age 23 How Do I Use It? 3. For further details, tap to open the Cursor menu. 4. T ap . The address, the coordinate and the list of nearby POIs will be displayed. • ItiseveneasierifyouselectthedesiredpointintheFindmenu.
P age 24 How Do I Use It? Opening/ closing map control buttons T ap this button to show or hide the following map control buttons: •Zoomin/out •Rotateleft/right(3Dmaponly) •.
P age 25 How Do I Use It? Rotating left and right Changes the horizontal view angle of the map in 3D mode. When GPS position is available, TRAX353 always rotates the map so its top faces your direction of travel (T rack-U p orientation). Y ou can turn away from T rack-Up with these buttons.
P age 26 How Do I Use It? Smart Zoom TRAX353 can automatically rotate, scale and tilt the map and give you the optimal view: •Whenyouareapproachingaturn, TRAX353 zooms in and raises the view angle to let you easily recognise your manoeuvre at the next junction.
P age 27 How Do I Use It? T ilt and zoom preset buttons (available in Advanced mode only) T ap one of the preset buttons to setthetiltandzoomlevelstox, predenedvalues.SmartZoom is disabled. These buttons are available in 3D mode.
P age 28 How Do I Use It? There is no active route in Advanced mode If there is no route to be navigated in Advanced mode, this icon appears intheT urnPrevieweld.
P age 29 How Do I Use It? Icon Information Details Action There is no valid GPS position If there is no valid GPS position, this symbol appears here. T ap this area to open the GPS Data screen to check the signal status or the connection settings.
P age 30 How Do I Use It? Indicator strip - sounds muted/ enabled - T rack Log recording - not used - Bluetooth status Nothing happens if you tap this area of the screen. The following symbols appear in the Indicator strip: Icon Description The sound output of TRAX353 is muted.
P age 31 How Do I Use It? There is an error in the Bluetooth connection. TRAX353 is connected to a telephone as a handsfree set via Bluetooth. A phone call is in progress over the Bluetooth connection. Thefollowinginformationcanbeseeninthethreedataeldsshownon the map screen.
P age 32 How Do I Use It? Distance information There are distance type values that can be shown: •Distanceremainingtoreachthe destination •Distanceremainingtoreachthenext via point •Currentaltitude Thenextareaisacombinedstatuseld.
P age 33 How Do I Use It? Button Action In the active route, uses the Cursor as the start point by replacing the current GPS position (available in Advanced mode only) In the active route, uses the Cu.
P age 34 How Do I Use It? • While driving without an active route in TRAX353: Smart Zoom will zoom in if you drive slowly and zoom out to the limit set here when you drive at high speed. Enabling Smart Zoom T ap the map to let the map control buttons appear , and then tap to enable Smart Zoom.
P age 35 How Do I Use It? Return to normal navigation When GPS position is available, and you have moved the map (the icon is moving or is not even visible), or you have rotated the map in 3D mode, the button appears. T ap it to move the map back to the GPS position and re-enable T rack-up map orientation (automatic map rotation).
P age 36 How Do I Use It? Original position in the Cursor menu When the Cursor menu is open, a special icon ( ) shows the Cursor position the menu was opened with. Y ou can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor ( ) appears, and the buttons of the Cursor menu initiate actions for this new location.
P age 37 How Do I Use It? Route calculation and recalculation TRAX353 calculates the route based on your preferences: • Routecalculationmethod: • Fast • Short • E.
P age 38 How Do I Use It? Itinerary The Itinerary is the list of the route events, that is, the driving instructions. When you are on the Map screen, you can display the Itinerary in one of the follow.
P age 39 How Do I Use It? When the map is open with a manoeuvre in the middle: Button Description Zooms in the map. Zooms out the map. , Moves the map to show the previous or next manoeuvre. Opens a screen where you can avoid a part of the route starting from the selected manoeuvre.
P age 40 How Do I Use It? route; if you do not want to take that bridge, you can avoid it. Route demonstrations can be started from the Route menu by tapping the (high speed simulation) or the (simulation at normal speed) button.
P age 41 How Do I Use It? , . Road Safety Cameras The location of a Road Safety Camera is a special POI. They cannot be searched like other POIs, and there is a special proximity warning only for cameras. Y ou can save the Cursor as the location of a Road Safety Camera.
P age 42 How Do I Use It? • Ifyouexceedthespeedlimitofthecamera,thefollowingalso happens: • VisibleW arning: A symbolwiththespeedlimitappearsinthecornerof the map (for example: ), • AudibleW arning: A specialalertsoundisplayed.
P age 43 How Do I Use It? Section control These speed cameras work in pairs, and do not measure your current speed but your average speed between the two speed cameras. Both identify your car and record the exact time you pass them. They use the dif ference between the two points in time to calculate your average speed.
P age 44 How Do I Use It? Symbol Description The camera checks the speed of the direction into which you are driving. The camera checks the speed of the opposite driving direction. The camera checks the speed in both directions on the road. The camera can check the speed in any direction.
P age 45 How Do I Use It? 3: Navigating with TRAX353 Y ou can set up your route in TRAX353 in several ways: • Ifyouneedasimpleroute(aroutewithonlyonedestination,.
P age 46 How Do I Use It? Selecting the Cursor as the destination 1. Locate your destination on the map: move and scale the map as needed (page 14). 2. T ap the location that you want to select as your destination. The Cursor ( ) appears. 3. T ap to open the Cursor menu.
P age 47 How Do I Use It? thesecountries,orchooseanyofthemfromthelistofcountries,velines appear on the screen: The procedure is explained starting from the Navigation menu. 1. T ap the following buttons: (Simple mode), or , (Advanced mode).
P age 48 How Do I Use It? match the string appear in a list. • T ap to open the list of results before it appears automatically . 4. Pick the settlement from the list. 5. Enter the street name: 1. T ap . 2. Start entering the street name on the keyboard.
P age 49 How Do I Use It? more times on the same road. If this is the case, after giving the house number , you need to select the appropriate address by the district/suburb information. The procedure is explained starting from the Navigation menu. 1.
P age 50 How Do I Use It? • Afterenteringacoupleofcharacters,thenamesthat match the string appear in a list. • T ap to open the list of results before it appears automatically . 4. Pick the street from the list.
P age 51 How Do I Use It? 3. If needed, change the settlement: • T oselectthesettlementfromthelistofrecentlyusedones, tap the button. • T oenteranewsettlement: 1. T ap the button with the name of the settlement, or if you have changed the country/state, tap .
P age 52 How Do I Use It? 3. T ap tonishenteringtheaddress. 6. A list appears with the matching addresses. T ap the desired one. 7. The map appears with the selected point in the middle. T ap (Simple mode) or (Advanced mode) from the Cursor menu.
P age 53 How Do I Use It? appears automatically . 4. Pick the settlement from the list. 4. Enter the street name: 1. T ap . 2. Start entering the street name on the keyboard. 3. Get to the list of results: • Afterenteringacoupleofcharacters,thenamesthat match the string appear in a list.
P age 54 How Do I Use It? The procedure is explained starting from the Navigation menu. 1. T ap the following buttons: (Simple mode), or , (Advanced mode). 2. By default, TRAX353 proposes the country/state and settlement where you are. If needed, tap the button with the name of the country/state, and select a different one from the list.
P age 55 How Do I Use It? Entering an address with a postal code The current Sensis R15 map does not support Post Codes as described in this section. All of the above address searching possibilities can be performed with entering the postal code instead of the settlement name.
P age 56 How Do I Use It? • T ap to open the list of results before it appears automatically . 4. Pick the street from the list. 5. Enter the house number: 1. T ap . 2. Enter the house number on the keyboard. 3. T ap tonishenteringtheaddress.
P age 57 How Do I Use It? Selecting the destination from your Favourites Y ou can select a location that you have already saved as a Favourite to be your destination. The procedure is explained starting from the Navigation menu. 1. T ap the following buttons: (Simple mode) or , (Advanced mode).
P age 58 How Do I Use It? location. • : The POI will be searched around the current GPS position. • : The POI will be searched around the destination of the active route. • : The POI will be searched not around a given point but by the size of the detour it means from the active route.
P age 59 How Do I Use It? 5. T ap the desired POI in the list. 6. The map appears with the selected point in the middle. T ap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating.
P age 60 How Do I Use It? 1. T ap the following buttons: (Simple mode), or , (Advanced mode). 2. If necessary , turn the page with to see earlier destinations. 3. T ap the desired item. 4. The map appears with the selected point in the middle. T ap (Simple mode) or (Advanced mode) from the Cursor menu.
P age 61 How Do I Use It? C r e a t i n g a m u l t i - p o i nt r o u t e ( i n s e r t in g a v i a point) Multi-point routes are created from simple routes, so a route must beactiverst.Oneofthewaysofexpandingtherouteistokeepthe destination, and to add via points (intermediate destinations).
P age 62 How Do I Use It? The route is optimised. The start point and the destination remain at their position, but the via points are reordered to make the shortest possible route. The selected point is removed from the route. The route remains as it was before adding the new point.
P age 63 How Do I Use It? T ap the following buttons: , , . The list of route points appear with the start point at the top of the list and thenaldestinationatthebottom.Ifseveralviapointsexist,youmight need to turn the page.
P age 64 How Do I Use It? • ViatheRouteInformationscreen:tap , , , . • ViatheRouteInformationscreenusingashortcut:tap , . W atching the simulation of the route This feature is available in Advanced mode only .
P age 65 How Do I Use It? Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road. While driving, you will not be able to set a new destination or to change settings. The only screen control that remains enabled is the gesture that puts you back on the Map screen.
P age 66 How Do I Use It? , , . If via points exist in the active route, you cannot delete the route immediately on the Route Information screen. T ap repeatedly until all via points disappear and the button appears. T ap it to cancel the whole route.
P age 67 How Do I Use It? recording. TRAX353 labels the T rack Log with a time stamp. (As an alternative, you can tap the button in the Quick menu to start, and later to stop the T rack Log recording.) Simulating a T rack Log on the map 1. T ap the following buttons: , , .
P age 68 How Do I Use It? • Ifyouupdatedyourmapsinceyourstsavedtheroute, TRAX353 recognises the change, and recalculates the driving instructions according to the latest available map information.
P age 69 How Do I Use It? Screen Button Description Map The Map screen. Find Selecting the destination (for example an address or a POI) or using the search engine of TRAX353 for any other reason (for example to look for the phone number of a POI).
P age 70 How Do I Use It? screenshot), but when you tap the map, additional buttons and controls appear for a few seconds (right screenshot). Most parts of the screen behave as buttons.
P age 71 How Do I Use It? Position menu (appears when navigating a route) Opens the Position menu Cursor menu (appears when there is no GPS position or the Cursor is not at the current GPS position) O.
P age 72 How Do I Use It? Enable Smart Zoom (replaces the previous button if there is no GPS position or the map has not been moved) T ap this button once to enable Smart Zoom.
P age 73 How Do I Use It? Map scale (2D map only) n/a Icons on the map There are several status icons on the map. Most of them also function as a button.
P age 74 How Do I Use It? Icon Description TRAX353 has no connection to the GPS receiver: GPS navigation is not possible. Devices with a built-in GPS receiver are permanently connected. On such devices, the icon does not appear in normal circumstances.
P age 75 How Do I Use It? Pedestrian Status indicator strip Thi s i s a co mpl ex ind ica tor . In one str ip it ind ica tes th e f oll owi ng sta tus information: Icon Description The sound output of TRAX353 is muted. The sound output of TRAX353 is enabled.
P age 76 How Do I Use It? Next two route events (T urn Preview elds) The re are tw o eld sr ese rve don th eM ap scr een to di spl ay the ne xt two man oeu vre s ( rou te eve nts th at are lis ted in th e I tin era ry) .
P age 77 How Do I Use It? , Board ferry . , Leave ferry . , Approaching the next via point. , Approaching the destination. In cer tai ns itu ati ons whe nr out ee ven ts are no ti mpo rta nt, th ese e lds sh ow other useful pieces of information.
P age 78 How Do I Use It? T errain Detail Level 3D terrain map data shows changes in terrain, elevations or depressions in the land when you view the map, and use it to plot the route map in 3D when you navigate. Landmarks Landmarks are 3D artistic or block representations of prominent or well-known objects.
P age 79 How Do I Use It? Start point Therstpointoftheroute. No r ma l ly , if GP S p o si t io n i s a v ai l ab l e, i t is th e s t ar t p o in t of th e r o ut e . I f t he r e i s no valid GPS position, TRAX353 uses th e l a st kn o wn GP S pos it i on as th e s t ar t point.
P age 80 How Do I Use It? Active leg of the route The section of the route on which you are driving. If you have not added any via points (only a destination), the entire route is the active leg.
P age 81 How Do I Use It? Cursor menu As soo n a s y ou sel ect on e p oin t in th e F ind me nu, th e m ap app ear s w ith th e Cursor menu, a menu with possible actions for the selected point. Alt ern ati vel y , whe n yo u t ap the ma p, con tro l b utt ons ap pea r .
P age 82 How Do I Use It? If the Cursor is at or near the destination, this button replaces the previous one, and deletes the current destination from the route. The last via point is promoted as destination, or if there are no via points, the route is deleted.
P age 83 How Do I Use It? Map locations can be marked with Pins. Unlike POIs, a Pin has no name and other details, only a colour to let you tell one from another on the map. If the Cursor is at or near a Pin, this button replaces the previous one, and deletes the Pin the Cursor is near to.
P age 84 How Do I Use It? In the to p s ect ion of th e s cre en y ou see in for mat ion ab out th e c urr ent ro ute . The e lds on th is scr een ar ec onti nuo usl yu pda ted wh ile yo uk eep th e screen open.
P age 85 How Do I Use It? T ime Left Shows the time needed to reachthenaldestinationof the route based on information available for the remaining segments of the route. The calculation cannot take into accounttrafcjamsandother possible delays.
P age 86 How Do I Use It? Appears only if there are no via points in the route. Deletes the active route. T rip Information screen The T rip In for mat ion sc ree n h as both ro ute an d t rav el dat a y ou mig ht nee d dur ing yo ur jou rne y . I t c an be ope ned di rec tly fr om the Ma p s cre en by tappingtheT ripDataeld( ).
P age 87 How Do I Use It? Compass Shows the current heading. T apthiseldtoshow it on the map screen in one of the T rip Data elds. Speedo- meter Shows the current speed both graphically and as a number . T apthiseldtoshow it on the map screen in one of the T rip Data elds.
P age 88 How Do I Use It? Speed Limit Shows the speed limit of the current street if the map contains it. T apthiseldtoshow it on the map screen in one of the T rip Data elds. Opens a new screen with three resettable T rip Computers.
P age 89 How Do I Use It? from the T rip Information screen by tapping . The e lds on th is scr een ar ec onti nuo usl yu pda ted wh ile yo uk eep th e screen open. Y ou ca n s wit ch bet wee n t he tri ps, pa use th en res ume the m, or res et the ir data.
P age 90 How Do I Use It? Name Main function (single tap) Function (tap and hold) Master V olume slider Adjusts the sound volume of the device. All sounds of the application are involved. No action. If you only adjust the volume, you need to use this button to return to the Map screen.
P age 91 How Do I Use It? Opens the Bluetooth menu screen and access to the Bluetooth feature. Same as main function. GPS data screen T ap the following buttons: , t o o pen th e G PS Data screen and to see the status of the GPS reception.
P age 92 How Do I Use It? Grey TRAX353has a connection to the GPS receiver but GPS position information is not available. Red TRAX353 has no connection to the GPS receiver . Green, blinking TRAX353 is connected to the GPS receiver . Y ellow , blinking TRAX353 has no connection to the GPS receiver but it is still trying to establish a connection.
P age 93 How Do I Use It? n/a Status bar for the satellites Dark bars are for the yellow and lit bars are for the green satellites. The more satellites your GPS tracks (the green ones), the better is your calculated position. Find menu Select the destination of your route.
P age 94 How Do I Use It? Button Description Reference Opens a screen with useful route data. Page 83 Y ou can browse the driving instructions that TRAX353 follows during navigation. Y ou can exclude manoeuvres or streets to adjust the route to your preferences.
P age 95 How Do I Use It? Recording, simulating, renaming or deleting track logs, assigning colour to them to be shown on the map Page 96 Renaming or deleting Favourites Page 97 Creating, updating or .
P age 96 How Do I Use It? Button Description Deletes the selected item in the History . Deletes the entire History . , T urns the page for additional list items. Manage T rack Logs Y ou ca n r eco rd Tr ack Lo gs, th en pla y t hem ba ck, di spla y t hem on th e m ap, and see their details.
P age 97 How Do I Use It? T ap one of the coloured buttons to assign a colour to the T rack Log. The T rack Log will be shown on the map with this colour . The map returns with the T rack Log. The map is scaled to show the whole T rack Log. Deletes the selected T rack Log.
P age 98 How Do I Use It? Button Description Button with the name of the POI group Opens the list of the subgroups of this POI group. The new list behaves the same as this one. Button with the name and address of a POI item Opens the selected POI for editing.
P age 99 How Do I Use It? Button with the icon of the POI group T ap this button to select a new icon for the POI group. Deletes the edited POI group. Y ou are only allowed to remove POI groups that you have created. When a POI item is open for editing: Button Description Button with the name of the POI T ap this button to rename the POI.
P age 100 How Do I Use It? Deletes the entire list. , T urns the page for additional list items. T ap to save a new search criteria. Similar to how you search for a POI, select the searchreferencerst,thenselectthePOI group or subgroup to search in.
P age 101 How Do I Use It? Settings menu Y ouca nc on gur et he pro gra mse tti ngs ,a nd mod ify th eb eha vio ur of TRAX353. T ap the following buttons: , . The Settings menu has two pages of submenus. T ap to ac ces s t he other options.
P age 102 How Do I Use It? Y o u c a n c h a n g e s om e d e v i c e s e t t i n g s t o c o n t r o l the screen backlight when TRAX353 is running. Page 1 1 1 Y ou can set up an automatic T rack Log saving,andne-tuneitssettings. Page 1 12 T h i s s c r e e n ha s n o n a v i g a t i o n f e a t u r e .
P age 103 How Do I Use It? ColourProles TRAX353 is able to show the map and the menus in different colours during the day and during the night. Selectthecolourprolestobeusedineachmode, and select the automatic or manual switching between thedaytimeandnightcolourproles.
P age 104 How Do I Use It? Dynamic V olume When driving at high speed, the noise in the car may be too loud to clearly hear the voice guidance and other sounds. Using Dynamic V olume you can instruct TRAX353 to increase the volume when your speed exceeds a certain minimum, and reach its highest volume at the given maximum speed.
P age 105 How Do I Use It? • T axi • Bus • Emergencyvehicles • Bicycle • Pedestrians Road T ypes Used for Route Planning: T ype Description Motorways Y ou might need to avoid motorways when you are driving a slow car or you are towing another vehicle.
P age 106 How Do I Use It? Route Calculation Method types: T ype Description Fast Gives the quickest possible route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. Short Gives a route that has the smallest total distance of all possible routes between the route points.
P age 107 How Do I Use It? Units Y ou can set the distance units to be used by the program. TRAX353 may not support all the listed units in some voice guidance languages. If you select a measurement unit not supported by the chosen voice guidance language, a warning message will appear .
P age 108 How Do I Use It? T ype Description Keep Position on Road This feature allows car drivers to always correct GPS position errors by matching the vehicle position to the road network. For pedestrian navigation, this feature is automatically disabled to let the software show your exact position.
P age 109 How Do I Use It? W arning settings Y ou ca n e nab le som e h and y w arn ing s, and di sab le the tou ch scr een in a moving vehicle with Safety Mode. T ap the following buttons: , , . T ype Description W arn when speeding Maps may contain information about the speed limits of the road segments.
P age 110 How Do I Use It? Speed Camera W arning This feature allows you to receive a warning when approaching a Road Safety Camera. Y ou must ensure on your own liability that using this feature is legal in the country where you intend to use it.
P age 111 How Do I Use It? Autodetect T apthisbuttonandletTRAX353ndandconnectthe GPS receiver . Menu settings Y ou ca n m odi fy the lo ok and be hav iou r o f t he Men u sc ree ns. T ap the following buttons: , , . T ype Description Animation Y ou can activate and deactivate the Menu animations.
P age 112 How Do I Use It? T ype Description Power Management Y ou ca n s et how th e b ack lig ht wil l b eha ve whe n t he scr een ha s n ot bee n t ouc hed fo r a whi le. Y ou ha ve the following options: •Backlight AlwaysOn:Thescreeniscontinuouslylit.
P age 113 How Do I Use It? T rack Logs Max. Size Y ou can set the maximum database size for the automatically saved track logs. When the limit is reached, the oldest automatically saved track logs will be deleted.
P age 114 How Do I Use It? 6: Bluetooth TRAX353 includes Bluetooth® connectivity . With its integrated microphone TRAX353 allows you to answer and make calls from the touch screen. Access to the Bluetooth feature is in the Quick menu screen (page 89).
P age 115 How Do I Use It? Paired Device (No Phone) TRA X35 3 w ill se arc h f or and li st n ear by Blu eto oth de vic es. No Pai red Dev ice s a re currently listed Make sure the Blu eto oth on yo ur phone is enabled. T ouch to begin search T ouch to search for Blu eto oth devices.
P age 116 How Do I Use It? Y ou sh oul d s et up you r p hon e t o a llo w c onn ect ing to you r n avi gat or aut oma tic all y i n t he fut ure . S ee y our ph one ma nua l f or mor e d eta ils . Pairingisnished. T ouch to exit the pairing procedure.
P age 117 How Do I Use It? Managing Bluetooth Devices Bluetooth Off Bluetooth On (Disconnected) Y ou may have multiple phones set up for connection with your TRAX353. Bluetooth Off (Connected) Bel ow is the ty pic al dis pla y w hen Blu eto oth on yo ur mob ile is se t t o c onn ect automatically .
P age 118 How Do I Use It? Paired Devices Screen Y ou can add and remove phones from your list and disconnect and connect to dif ferent ph one s u sin g t he Lis t S cre en.
P age 119 How Do I Use It? Answering a Bluetooth Call Phone Menu (T alk) Phone Menu (T alk on Phone) Whe n a Blu eto oth ca ll is rec eiv ed the na me and num ber is displayed. T ouch to end call. T ouch to can cel incoming call. T ouch t o acc ept th e c all and begin talk.
P age 120 How Do I Use It? Making a Bluetooth Call (from Dial Pad) T o make a Bluetooth call touch the following buttons from the Map screen. , , . Phone Menu (T alk) Phone Menu (T alk) 1. i) Inp ut pho ne number 2. T ouch to call 1. ii) T o uch to delete digit 3.
P age 121 How Do I Use It? Making a Bluetooth Call (from PhoneBook) Add to Phonebook T ouch to open Phonebook list. If the phonebook is empty tap to dow nlo ad pho neb ook fr om pai red phone. Phonebook Empty Dial from Phonebook Phonebook Downloaded Select Name T ouch to add Phonebook from Mobile Phone T ouch , to scroll down the phonebook list.
P age 122 How Do I Use It? Name w/multiple number Making Call Making a Bluetooth Call (from Call Log) Call Log T ouch to open Call Log list. If the ca ll log is em pty T RAX 353 wi ll dow nlo ad the ca ll log fr om the pa ire d phone. T ouc h n ame to sel ect .
P age 123 How Do I Use It? Answered Call Making Call Dialled Call Missed Call T ouch to sel ect ca ll log . The det ail s o f the se lec ted log ged ca ll will display .
P age 124 How Do I Use It?.
P age 125 How Do I Use It?.
P age 126 How Do I Use It? 6: Glossary 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and need at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
P age 127 How Do I Use It? North-up map orientation In North-up mode the map is rotated so its top always faces North. This is the orientation in 2D map view mode and in Overview mode. See also: T rack-up map orientation. Overview mode Y ou can instruct TRAX353 to automatically switch to Overview mode if the next route event is in a distance.
P age 128 Notes.
P age 129 Notes.
P age 130 UNIDEN TRAX353 IN CAR NA VIGA TION Limited One Y ear Warranty Please keep your sales docket as it provides evidence of warranty . Important: Evidence of original purchase is required for warranty service. W arrantor: Uniden Australia Pty Limited A.
P age 131 P ARTS COVERED: This warranty covers for one (1) year , the Product and included accessories. ST A TEMENT OF REMEDY : In the event that the Product does not conform to this warranty at any t.
THANK Y OU FOR B UYING A UNIDEN PR ODUCT . © 2008 Uniden Australia Pty Limited. Uniden New Zealand Ltd. Printed in China. USZZ01214ZZ(0).
An important point after buying a device Univex TRAX353 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Univex TRAX353 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Univex TRAX353 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Univex TRAX353 you will learn all the available features of the product, as well as information on its operation. The information that you get Univex TRAX353 will certainly help you make a decision on the purchase.
If you already are a holder of Univex TRAX353, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Univex TRAX353.
However, one of the most important roles played by the user manual is to help in solving problems with Univex TRAX353. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Univex TRAX353 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
