Instruction/ maintenance manual of the product USI-2430 Universal Security Instruments
Go to page of 10
MODEL USI-2430 HEAT ALARM 120 VAC WITH 9V BATTERY BACKUP OWNER'S MANUAL WHAT YOU SHOULD KNOW ABOUT HEAT ALARMS FEATURES • This heat alarm is powered by 120 V AC and a 9 V olt battery backup source. AC/ DC heat alarms offer added protection in the event of a power failure or a drained battery.
• Maximum alarm coverage has been determined by UL to provide detection time equal to sprinkler devices spaced at 10 foot intervals (100 square foot area) on a smooth ceiling 15 ft. x 8 in. high. Higher ceilings can adversely affect detection time. In some instances, earlier detection may be obtained by reducing the spacing between detectors.
- 3 - • This heat alarm can only sound its alarm when it detects temperatures of 135 o F or greater. Heat alarms do not sense smoke, fire or gas. In some fires, hazardous levels of toxic chemicals and smoke can build up before a heat alarm will operate.
- 4 - NA TIONAL FIRE PROTECTION ASSOCIATION REQUIRED PROTECTION For your information, the National Fire Protection Association's Standard 72, reads as follows: “1 1.
HEA T ALARM LOCA TIONS Install a heat alarm as close to the center of the ceiling as possible. If the center is not practical, mount the heat alarm no closer than 4 inches from a wall or corner .
INSTALLATION Installation of this unit must conform to the electrical codes in your area; Article 760 of the National Electrical Code, NFP A 72, 101; SBC (SBCCI); UBC (ICBO); NBC (BOCA): OTFDC (CABO), and any other local or building codes that may apply.
Interconnected CO alarms will only respond if a CO alarm / event initiates the alarm. All other alarms remain silent. Interconnected smoke alarms, heat alarms and relay modules will only respond if a smoke alarm / event or heat alarm / event initiates the alarm.
OPERATION, TESTING & MAINTENANCE OPERATION: The heat alarm is operating once the power is connected and turned on (the battery must also be installed). When air temperature above 135 o F is sensed, the unit sounds a loud alarm which continues until the air is cleared.
DEVELOP AND PRACTICE A PLAN OF ESCAPE BASICS OF ESCAPE PLAN o Make a floor plan indicating all doors and windows and at least two escape routes from each room. Second story windows may need a rope or chain ladder . o Have a family meeting and discuss your escape plan, showing everyone what to do in case of fire.
288-3256-00D USI FIVE YEAR LIMITED W ARRANTY USI ELECTRIC, INC. ("USI") warrants your USI product to be free from defects in material and workmanship for a period of five (5) years from the date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal residential use and service.
An important point after buying a device Universal Security Instruments USI-2430 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Universal Security Instruments USI-2430 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Universal Security Instruments USI-2430 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Universal Security Instruments USI-2430 you will learn all the available features of the product, as well as information on its operation. The information that you get Universal Security Instruments USI-2430 will certainly help you make a decision on the purchase.
If you already are a holder of Universal Security Instruments USI-2430, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Universal Security Instruments USI-2430.
However, one of the most important roles played by the user manual is to help in solving problems with Universal Security Instruments USI-2430. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Universal Security Instruments USI-2430 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
