Instruction/ maintenance manual of the product MCND401LCN Universal Security Instruments
Go to page of 12
THANK YOU for purchasing this combination alarm. It is designed to detect carbon monoxide and natural gas (methane) which reaches the sensor . It is not designed to detect fire, heat, flames or any other gas. This manual includes important information regarding where to inst all the alarm, how to operate, maintenance, testing and product features.
WHA T YOU SHOULD KNOW ABOUT CO Carbon monoxide (CO) is an insidious poison. It is a colorless, odorless, tasteless gas. It is a cumulative poison. Even low levels of CO have been shown to cause brain and other vital organ damage in unborn infants with no effect on the mother .
In general, install combination CO and Gas Alarms: • WHERE YOU CAN HEAR THE ALARM FROM ALL SLEEPING AREAS. • In or near bedrooms and living areas or wherever you suspect a gas or CO exposure is likely .
Page 4 RECOMMENDED PLACEMENT : NOTE: For any location, make sure no door or other obstruction could prevent the carbon monoxide or gas from reaching the alarm. WHERE THIS ALARM SHOULD NOT BE INST ALLED T o avoid causing damage to the unit, to provide optimum protection, and to prevent unnecessary alarms.
• Good ventilation is recommended when household cleaning supplies or similar contaminants are used. • Excessive spillage or reverse venting of fuel-burning appliances caused by outdoor ambient conditions, such as: Wind direction and/or velocity , including high gusts of wind.
Page 6 IMPORT ANT! The battery backup is designed to provide short-term emergency power to the CO and Gas Alarm. Actual backup time depends on the strength (freshness) of the battery . The battery backup will not work unless a good battery is properly installed.
1. Operate SILENCE button; 2. Call your emergency services, fire department or 91 1. Write down the number of your local emergency service here: 3. Immediately move to fresh air - outdoors or by an open door/window . Do a head count to check that all persons are accounted for .
Page 8 WEEKL Y TESTING • NEVER use an open flame of any kind to test this unit. Y ou might accidentally damage or set fire to the alarm or to your home. The built-in test switch accurately tests the unit's operation as required by CSA 6.19-01 S tandard.
Use only the batteries specified. Use of different batteries may have a detrimental effect on the CO/Gas alarm. The constant exposures to high or low temperatures or high humidity may reduce battery life. IMPORT ANT! The battery backup is designed to provide short-term emergency power to the alarm.
Page 10 HOW CAN I PROTECT MY F AMIL Y FROM CO POISONING? This alarm is an excellent means of protection. It monitors the air and sounds a loud alarm before carbon monoxide levels become threatening to the average, healthy adult. An alarm is not a substitute for proper maintenance of home appliances.
Page 1 1 On and Blinks off approx every 20 seconds AC Power is present. DC power is present Silent Off and Blinks on approx every 40 seconds Of f Of f Alarm is powered by battery backup. AC Power is not present. Check the breaker or fuse box for power .
288-3437-00 © 2010 UNIVERSAL SECURITY INSTRUMENTS, INC Printed in China FIVE YEAR LIMITED WARRANTY MODELS MCN400CN, MCN400LCN, MCN600CN, MCN600LCN MODELS MCND401 CN, MCND401L CN, MCND601 CN, MCND601L CN USI ELECTRIC, INC./UNIVERSAL SECURITY INSTRUMENTS, INC.
An important point after buying a device Universal Security Instruments MCND401LCN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Universal Security Instruments MCND401LCN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Universal Security Instruments MCND401LCN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Universal Security Instruments MCND401LCN you will learn all the available features of the product, as well as information on its operation. The information that you get Universal Security Instruments MCND401LCN will certainly help you make a decision on the purchase.
If you already are a holder of Universal Security Instruments MCND401LCN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Universal Security Instruments MCND401LCN.
However, one of the most important roles played by the user manual is to help in solving problems with Universal Security Instruments MCND401LCN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Universal Security Instruments MCND401LCN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
