Instruction/ maintenance manual of the product Digital Thermometer Unisar
Go to page of 9
.
2 3 INTRODUCTION Thank you for purchasing the BébéSounds ® Remote Fever Monitor . This Thermometer will enable you to monitor your baby’ s fever from another room, 24 hours a day . With the Remote Fever Monitor you will be immediately alerted if your child’ s temperature has spiked up.
4 5 KEY FEATURES • Y our child’ s temperature is taken every 5 seconds • The thermometer transmits your child’ s temperature to your portable Parents’ Unit every 10 seconds • Alerts you if your child’ s fever is rising • Alarm can be set for 5 different temperature readings: 98°F , 99°F , 100°F , 101°F , and 102°F/36.
6 7 INSTRUCTIONS FOR USE 1. T urn on the baby’ s thermometer by pressing the power button for approximately 2 sec- onds. The LCD display will show the temperature data. 3. T urn on the Parents’ Unit by pressing the power button for approximately 2 seconds.
8 9 • Information is being received • T emperature is under the alarm set point • T emperature reading is at or above the set point • Signifies low battery • T emperature above or below the Monitor ’ s range 5. T o set the alarm push the power button and the LCD display will flash an alarm setting and read “SET .
10 11 CARE AND CLEANING 1. The Remote Fever Monitor is a delicate electronic device. T o insure proper functioning, do not immerse either unit in water and avoid dropping them. 2. Clean both units with a soft cloth moistened with either water or alcohol.
12 13 TECHNICAL DATA • For household use only • Consult your doctor before using if there is a Pacemaker implanted • T emperature measurement range: 62.6°~109.4°F/17.5°~43°C • T emperature display range: 62.6°~109.4°F/17.5°~43°C • Ambient operating environment: 60.
14 15 NOTES NOTES.
If you are having difficulty , have questions, or need assistance, call our Help Desk toll free at 1-888-232-6476 Mon-Fri from 9:00AM-5:00PM EST . The Remote Fever Monitor is a Personal Care Pr oduct and cannot be returned to the r etailer .
An important point after buying a device Unisar Digital Thermometer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Unisar Digital Thermometer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Unisar Digital Thermometer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Unisar Digital Thermometer you will learn all the available features of the product, as well as information on its operation. The information that you get Unisar Digital Thermometer will certainly help you make a decision on the purchase.
If you already are a holder of Unisar Digital Thermometer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Unisar Digital Thermometer.
However, one of the most important roles played by the user manual is to help in solving problems with Unisar Digital Thermometer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Unisar Digital Thermometer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
