Instruction/ maintenance manual of the product XS610 Uniden
Go to page of 24
XS610 MANUAL OWNER’S.
CONTROLS AND FUNCTIONS 1 7 8 9 6 5 2 3 10 4 11 12 13 1. T alk - answers or places calls 2. Mem - stores or recalls numbers in memory 3. Volume ringer - sets the ringer or earpiece volumes 4. Microphone/ringer 5. T alk/batt low - LED indicates when phone is in use or the battery is low 6.
1 Included in your Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Important Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . .3 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INCLUDED IN YOUR P ACKAGE Handset Base T o get the most from your phone, please read this owner’ s manual thoroughly . Be sure to complete and mail the product registration form. If any of these items are missing or damaged, contact your place of purchase immediately .
3 Unplug all electrical appliances when you know an electrical storm is approaching. Lighting can pass through your household wiring and damage any device connected to it.
4 Before you read anything else, please observe the following: W arning! UNIDEN DOES NOT represent this unit to be waterproof. T o reduce risk of fire, electrical shock or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Battery Warning • This equipment contains a rechargeable Ni-Cad battery .
PRECAUTIONS 5 When using your telephone equipment, these basic safety precautions should always be followed to reduced the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product.
6 operating instructions. Improper adjustment of other controls may result in damage and will often require extensive repair work by a qualified technician.) E. If the product has been dropped or the cabinet has been damaged. F . If the product exhibits a distinct change in performance.
7 INTRODUCTION Congratulations on your purchase of the Uniden XS610 Cordless T elephone. This phone is designed to exacting standards which provide reliability , long life, and outstanding performance.
8 Selecting a Location Before choosing a location for your new phone, there are some important guidelines you should consider: • The location should be close to both a phone jack and power outlet. • Keep the Base Unit and Handset away from sources of electrical noise such as motors or fluorescent lighting.
9 Charging the Battery Pack The rechargeable Nickel-Cadmium battery pack must be fully charged before using your phone for the first time. Before plugging the phone line into your new phone, you must charge the battery for approximately 15-20 hours without interruption.
10 1. Plug the AC adaptor cord into the 9V DC input jack on the base. 2. Wrap the AC adaptor cord inside the molded strain-relief. 3. Plug one end of the long telephone cord into the TEL LINE jack on the base. 4. Plug the other end of the telephone cord into the telephone wall jack.
11 4. Fit the Wall Mounting adaptor to the Bottom of the telephone as shown. Mounting on a Standard Wall Plate The phone is designed to be mounted on a standard telephone wall plate. 1. Plug the AC adaptor into the base. 2. Place the AC adaptor cord inside the left molded channel cord holder .
12 Mounting Directly on a Wall If you do not have a standard wall plate, you can mount the phone directly on a wall. Before mounting your cordless telephone, consider the following: Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
13 Raising the Antenna Before using your phone, be sure to fully raise the antenna to the vertical position. ADJUSTING RINGER/EARPIECE VOLUME CONTROLS Ringer T one and V olume 1. While the handset is not in use, press vol/ringer key . 2. The phone has two ringer tones, each with two volume levels.
14 MAKING AND RECEIVING CALLS USING YOUR NEW PHONE When the phone rings, remove the handset from the base. ( Autotalk ) 1. Remove the handset from the base and press talk . 2. The talk LED lights. 3. Listen for the dial tone. 4. Dial the number . Return handset to the base.
15 Y our XS610 phone has 10 memory locations for storing important telephone numbers. 1. Remove the handset from the base and press mem . The talk/batt low LED flashes and you hear a beep. 2. Enter the phone number you want to store (up to 16 digits).
16 Australia If you have the “call waiting” service and a call waiting tone sounds while you are on a call, press flash then 2 to accept the waiting call. There is a short pause, then you will hear the new caller . T o return to the original caller press flash then 1 .
17 If you encounter interference while using your phone you can manually change the phones channel for clear operation. Interference can come from appliances or other phones in your home. This function works only when the phone is in use. The chan button on the handset allows you to choose between factory set channels (10 AUS/25NZ).
18 TROUBLESHOOTING YOUR NEW PHONE If your XS610 cordless telephone is not performing to your expectations, please try these simple steps first before calling Uniden customer service . Caution: Do not attempt to service this until yourself. Servicing must be performed by qualified personnel.
19 TROUBLESHOOTING No dial tone. ● Check the telephone line cord connectors at both ends that they are pushed in firmly until they click. ● If you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five second to reset the system.
20 Frequency Control: PLL Modulation: FM Operating T emperature: -10˚C to 50˚C Receive Frequency: 39.775 to 40.00 MHz (10 channels AUS) 39.800 to 40.
21 One Y ear Limited Warranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited ACN 001 865 498 Uniden New Zealand Limited ELEMENT OF W.
THANK YOU © 2000 Uniden Australia Pty Limited Uniden New Zealand Limited UDZZ01584ZZ FOR PURCHASING A UNIDEN PHONE!.
An important point after buying a device Uniden XS610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden XS610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden XS610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden XS610 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden XS610 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden XS610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden XS610.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden XS610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden XS610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
