Instruction/ maintenance manual of the product XS1210 Uniden
Go to page of 12
OWNER'S MANU AL XS1210 OWNER'S MANUAL.
Introduction Controls and Functions Uniden 2.4GHz cordless phones are designed and engineered to exacting standards for reliability , long life, and outstanding performance.
Included with Y our Phone • Base Unit • Handset • AC adaptor • Rechargeable Battery • T elephone Cord W all Mount adaptor • This owner ’s manual Throughout this manual, terms such as S tandby and T alk Mode are used. Below is the terminology explanation.
B. Inst all the rechargeable battery p ack into the handset C. Connect the base unit and charge the handset The handset is powered by a rechargeable battery pack.
35mm 100mm 3mm 5. Once the handset battery pack is fully charged, connect the telephone line cord to the jack and a telephone outlet. This phone can be mounted on any standard wall plate. 1. Locate the base unit on the wall mount adaptor as shown and slide the wall mount adaptor into the notches on the base bottom with the tab pressed.
Making and Receiving Calls Making a call Receiving a call Hanging up Redialing the last dialed number Ringer tone and volume Earpiece volume T emporarily Mute Ringer T ravelling Out-of-Range Selecting a Different Channel 1. Remove the handset from the base.
Find Handset Low Battery Alert T o maintain a good charge, clean the charging cont acts on the handset once a month. Dampen a cloth with plain water . Gently rub the damp cloth over the charging contact s until all visible dirt is removed. Dry the contact s thoroughly before returning the handset to the base.
3. If you need the phone to pause during the dialing sequence, press the key to insert a two-second delay between the numbers. Y ou can enter multiple pauses to increase the delay . Each pause counts as a digit. 4. Press the key again. 5. T o store this number in the RocketDial memory , press the key .
[8] Changing the Digit al Security Code The digital security code is an identification code used to connect the handset and the base unit. Normally , setting the code is not necessary . The first time you charge your handset, the security code is automatically set.
T roubleshooting If your cordless telephone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, please visit our website www .uniden.co.au or www .uniden.co.nz NOTE: Do not attempt to service this unit yourself.
[10] W arranty UNIDEN XS1210 Cordless Phone Limited One Y ear Warranty Note: W arrantor: W arranty only available in original country of purchase Elements of W arranty: W arranty Duration: Parts Cover.
© 2005 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UPZZ01059ZZ.
An important point after buying a device Uniden XS1210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden XS1210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden XS1210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden XS1210 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden XS1210 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden XS1210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden XS1210.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden XS1210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden XS1210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
