Instruction/ maintenance manual of the product UH-050XR Uniden
Go to page of 24
UH-050XR Operating Guide.
➤ Do not operate the transmitter of any radio equipment unless all the Radio Frequency (RF) connectors are secured and any open connectors are properly terminated. ➤ Do not operate the transmitter of any radio equipment near electrical blasting caps or in an explosive atmosphere.
Introduction Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 T echnical Support & Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Included in your UH-050XR Package . . . . . . . . .
The UH-050XR is a portable two-way UHF-CB radio. It is compact, rugged and fits easily in your hand. This hand held UHF radio will give you consistent, outstanding performance in virtually all conditions and situations.
TECHNICAL SUPPORT AND SERVICE Should you find it desirable or necessary to service your UH-050XR , we suggest you contact the Uniden dealer where you purchase your radio.
INCLUDED IN YOUR UH-050XR P ACKAGE 3 Note: If any of these items are missing from the box, contact your Uniden Dealer . Antenna AC Adaptor (AAD-052S) UH-050XR Wrist Strap Battery BP-052 (7.
A TT ACHING THE ANTENNA Attach the antenna to the UH-050XR following direction as indicated below . Be sure the antenna is firmly seated. A TT ACHING THE BA TTERY P ACK 1. Slide the battery pack onto the bottom of the radio. 2. Use a coin to turn the screw that connects the battery pack to the UH-050XR .
BA TTERY CHARGE INDICA TOR When charging, the CHG icon appears on the display . Note : 1. Transmit Operation is disabled when UH-050XR is being charged. 2. A single tone is emitted by the radio and CHG is displayed to indicate that it has started charging.
➤ When you press any key (except PTT), a short tone sounds. ➤ See the Controls and Indicators page at the back of this operating guide for button and key operations. POWER ON/OFF T o turn the unit ON , rotate the [ON/OFF VOL] clockwise until a “click” is heard.
SQUELCH The squelch is used to eliminate any annoying background noise when there are no signals present. Think of squelch as a gate. T urn [SQ] fully clockwise. This raises the ”Squelch Gate” so high that only the very strong signals can get through.
TO TRANSMIT AND RECEIVE The UH-050XR uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed at the end of this manual. 1. The maximum RF transmit power of UH-050XR is 5 watts. T o switch to low power , press the [1/5W] .
USING A REPEA TER CHANNEL UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions. In normal Simplex operation, your radio transmits on one particular frequency and receives on that same frequency .
TO OPERA TE UH-050XR IN DUPLEX MODE Eg. CH01 is being used in your area for repeater use. Press [DUP] momentarily . The DUP icon appears. Press [DUP] again to deactivate the duplex operation.
Note: 1. If SCAN is deactivated while in an active channel, the UH-050XR will stay on that active channel. If no other channels are active, the UH-050XR will reinstate the starting channel. 2. Pressing [OS/GS] will switch to Group Scanning. 2. Group Scan (GS) Mode Allows you to monitor a Priority Channel while scanning.
Programming Scan Channels 1. Select which Scanning Mode you wish to use on the channel OS or GS Mode Note: OS is indicated by the absence of the GS icon 2. Select the channel you want to store by pressing [ ▲ ] or [ ▼ ] 3. Press and hold [MEM] for 1.
➤ POWER SA VE Battery Save feature extends the battery life by switching the receiver circuit power ON and OFF . This feature automatically activates during stand by mode (RX mode without signal). A flashing icon will appear on the display when the battery save feature is ON.
➤ BA TTERY LEVEL DISPLA Y The icon in the top right hand corner of the screen indicates the UH-050XR current battery voltage level at all times. The battery level is displayed in 4 levels: LEVEL 4 B.
* Emergency calling for both simplex and duplex operation Please do not use this channel in non-emergency cases. # Back-up Emergency Channel • Battery Eliminator (BE-050) • Standard Headset Microp.
General Channels T ransmit 40 (with Duplex Channel Support) Receive 40 Oper . T emp. 0 ˚ C - +55 ˚ C Antenna Flexible Whip Microphone Built-in Electret type Display Liquid Crystal Display Speaker 8 Ω 1 Watt Power Source BP-052 Rechargeable Nickel-cadmium Battery Pack 950mAh, 7.
17 Charger Std. Power Supply AAD-052S Input 230~240V AC, 50Hz Output 9V , 210 mA Approval No. V/00031 Specifications shown are typical and subject to change without notice.
UNIDEN UH-050XR UHF CB RADIO Australian One Y ear Warranty Note: Please keep your sales docket as it provides evidence of warranty . Warrantor: Uniden Australia Pty Limited ACN 001 865 498 Elements of.
DC9V CHG OFF VOL SQ MEM LOCK 1/5W OS/GS DUP SCAN MIC SPKR 2 3 1 4 5 7 8 UH-050XR 13 14 15 10 12 9 6 11 17 18 16 CONTROLS & INDICA TORS 19.
1. Antenna 2. Belt Clip 3. PTT (Push-to-talk) Switch 4. Monitor Switch 5. Charging Jack 6. Charging Jack Cover 7. Battery 8. Speaker 9. Lock Key 10. 1/5W Key 11. OS/GS 12. LCD Display 13. On/Off Volume Key 14. Squelch Key 15. Speaker Mic Jack Cover 16.
© 2000 Uniden Australia Pty Limited/Uniden New Zealand Limited Part Code UTZZ01872AZ.
An important point after buying a device Uniden UH-050XR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden UH-050XR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden UH-050XR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden UH-050XR you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden UH-050XR will certainly help you make a decision on the purchase.
If you already are a holder of Uniden UH-050XR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden UH-050XR.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden UH-050XR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden UH-050XR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
