Instruction/ maintenance manual of the product EXP971 Uniden
Go to page of 12
.
1 Introduction The Uniden 900MHz cordless phones are designed and engineered to exacting standards for reliability , long life, and outstanding performance. NOTE: Some illustrations in this manual may differ from the actual unit for explanation purposes.
2 Do the following steps: A. Choose the best location C. Connect the base unit B. Install the rechargeable battery pack into the handset D. Choose the dialing mode A. Choose the best location Before choosing a location for your new phone, read the INST ALLA TION CONSIDERATIONS included in the PRECAUTIONS.
3 4) Place the handset in the base with the keypad facing forward. NOTE: For optimum performance use only the Uniden Battery (BT -904) supplied with your phone . Replacement batteries are also available through the Uniden Parts Department at (800) 554-3988, Monday through Friday from 8:00 a.
Making and Receiving Calls 4) Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. TIP : If your telephone outlet isn’t modular , contact your telephone company for assistance. D.
5 T erminology Throughout this manual, terms such as Standby and T alk Mode are used. Below is the terminology explanation. • T alk Mode - The handset is off the base and the talk key has been pressed, enabling a dial tone. • Standby Mode - The handset may be sitting in or off the base, but is NOT in use.
6 Find Handset T o locate the handset (while it’s of f the base), press the find hs key on the base. The handset beeps for 60 seconds. Paging is canceled when pressing any handset key , the find hs key on the base or the handset is returned to the base.
7 One-touch RocketDial Y our phone is equipped with “One-touch RocketDial” for instant dialing. It is used to dial the phone number stored in the one-touch RocketDial location (See “Storing a Phone Number in Memory Dial”).
8 T roubleshooting If your cordless telephone is not performing to your expectations, please try these simple steps. NOTE : Do not attempt to service this unit yourself. Servicing must be performed by qualified personnel. Symptom The charge/in use LED won’t illuminate when the handset is placed in the base.
9 Precautions! Before you r ead anything else, please observe the f ollowing: W arning! Unid en America Corporation DOES NO T represent this unit to be waterproof. T o reduce th e risk of fire, electrical sh ock, or damage to the unit, DO NO T expose this unit to rain or moisture .
10 operate at a maxim um distance with the qualification that th e rang e depends upon the environmen t in which the telephone is used. Man y factors limit range , and it would be impossible to includ e all the variables in our r ating.
One Y ear Limited W arranty Important : Eviden ce of original pur chase is required for warran ty service . W ARRANTOR: UNIDEN AMERICA CORPORA TION (“Unid en”) ELEMENTS OF W ARRANTY: Uniden warr a.
An important point after buying a device Uniden EXP971 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden EXP971 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden EXP971 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden EXP971 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden EXP971 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden EXP971, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden EXP971.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden EXP971. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden EXP971 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
