Instruction/ maintenance manual of the product EXP6900 Uniden
Go to page of 12
C:...Exp 6900 B of B.vp Tue Jun 06 11:31:52 2000 Color profile: Disabled Composite Default screen.
Introduction The Uniden® EXP 6900 Series 900 MHz cordless phones are designed and engineered to exacting standards for reliability, long life, and outstanding performance.
Included with Your EXP 6900 Series Phone Also included: • This Owner’s Manual • Other Printed Material • Precautions and Important Safety Instructions If any of these items are missing or damaged, contact the Uniden Parts Department at (800) 554-3988, 7:00 a.
Controls and Functions 1. ta lk - answers or places calls 2. / tone - switches to tone dialing in pulse dial mode 3. re dia l - redials the last number 4. pa use - adds a timed pause in a memory dialing sequence 5. ta lk/ ba tt - LED indicates when phone is in use or the battery is low 6.
Installation Charging the Battery Pack The rechargeable nickel-cadmium battery pack must be fully charged before using your phone for the first time. Before plugging the phone line into your new phone, you must charge the battery for approximately 15-20 hours without interruption.
Desk or Tabletop Installation 1. Plug the AC adapter cord into the 9V DC input jack on the base. 2. Wrap the AC adapter cord inside the molded strain-relief. 3. Plug one end of the telephone cord into the TEL L INE jack on the base. 4. Place the telephone cord into the right molded channel cord holder.
4. Place the telephone cord into the right molded channel cord holder and plug the other end of the cord into the wall jack. (Remember, the phone must be fully charged before you can use it.) 5. Place the base on the two posts of the wall plate and slide downward to secure.
Setting Up Your Phone Raising the Antenna Before using your phone, be sure to raise its antenna to the vertical position. Adjusting Ringer/Volume Controls t Ringer Tone and Volume 1. While the phone is not in use, press volume . 2. The phone has two ringer tones, each with two volume levels.
You hear a long beep and the ta lk LED goes out indicating the number has been stored successfully. If you select any keys other than 0-9, the handset will beep rapidly and no number will be stored.
Erasing a Stored Number 1. Remove the handset from the base. 2. Press me m twice. 3. Press the memory location number (0-9) you want to clear. You hear a long beep confirming that you have erased the number. Replacing a Stored Number Remember, your EXP 6900 Series phone has 10 memory locations, represented by the numbers 0-9 on the keypad.
Troubleshooting If your EXP 6900 Series cordless telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact your place of purchase or call customer service at (800) 297-1023.
C:...Exp 6900 B of B.vp Tue Jun 06 11:32:06 2000 Color profile: Disabled Composite Default screen.
An important point after buying a device Uniden EXP6900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden EXP6900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden EXP6900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden EXP6900 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden EXP6900 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden EXP6900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden EXP6900.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden EXP6900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden EXP6900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
