Instruction/ maintenance manual of the product EXP2240 Uniden
Go to page of 12
EXP2240 1/18/2 10:50 AM Page 12.
1 Introduction The Uniden EXP2240 Series (EXP2240/EXP2241/EXP2243) 2.4 GHz cordless phones are designed and engineered to exacting standards for reliability , long life, and outstanding performance.
2 Do the following steps: A. Choose the best location C. Connect the base unit B. Install the battery pack D. Choose the dialing mode A. Choose the best location Before choosing a location for your new phone, read the INST ALLA TION CONSIDERA TIONS included in the PRECAUTIONS AND IMPORT ANT SAFETY INSTRUCTIONS.
3 4) Place the handset on the base. Be sure there is sufficient space to raise the base antenna to a vertical position. NOTE: Use only the Uniden Battery (BT-905) supplied with your phone. Replacement batteries are also available through the Uniden Parts Department.
Making and Receiving Calls NOTES: • The redial/p key redials the last number dialed. • The redialed number can be up to 24 digits long. 5) Connect the telephone line cord to the TEL LINE jack and a telephone outlet once the handset is fully charged.
5 T erminology Throughout this manual, terms such as Standby and T alk Mode are used. Below is the terminology explanation. • Standby Mode - The handset is not in use, off the base, and talk has not been pressed. A dial tone is not present. • T alk Mode - The handset is off the base and talk has been pressed enabling a dial tone.
6 Page T o locate the handset (while it’s of f the base), press find handset on the base. The handset beeps for 60 seconds. Paging is canceled when pressing any key , find handset on the base or return the handset to the base.
7 One-touch RocketDial Y our phone is equipped with “One-touch RocketDial” for instant dialing. It is used to dial the phone number stored in memory location 1. (See “Storing a Phone Number in Memory”.) T o instantly dial the phone number stored in memory location 1, simply press RocketDial .
8 T roubleshooting If your EXP2240 Series cordless telephone is not performing to your expectations, please try these simple steps. NOTE : Do not attempt to service this unit yourself. Servicing must be performed by qualified personnel. Symptom The status LED won’t illuminate when the handset is placed in the base.
9 Precautions! Before you r ead anything else, please observe the f ollowing: W arning! Unid en America Corporation DOES NO T represent this unit to be waterproof. T o reduce th e risk of fire, electri cal shock, or damage to th e unit, DO NO T expose this unit to rain or moisture .
10 the trouble has been corr ected. Radio Interference Radio interfer ence may occasionally cause buzzing an d humming in your cordless handset, or cli cking noises in the base. This in terference is caused by external sour ces such as TV , refrigerator , vacuum cleaner, fluorescen t lighting, or electrical storm.
EXP2240 1/18/2 10:50 AM Page 11.
An important point after buying a device Uniden EXP2240 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden EXP2240 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden EXP2240 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden EXP2240 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden EXP2240 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden EXP2240, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden EXP2240.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden EXP2240. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden EXP2240 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center