Instruction/ maintenance manual of the product DS 805 Uniden
Go to page of 24
DS 805 Optional Handset and Charge Base Suits models - DS815 DS825 DS845 DS875 QUICK START GUIDE Start Here! Quick Start Guide next page -.
(i) NOTE: Ringing will not be impaired by adding extra cordless handsets. This symbol indicates important operating and servicing instr uctions. PRECA UTIONS INST ALLA TION & SAFETY Choosing the b.
(ii) This page is a v er y condensed version of the Owners Manual. It is designed to allow y ou to get your phone installed and operating as quickl y as possible - how ever it does not attempt to e xplain any of the adv anced features of the DS805.
(iii) If a handset is registered at any time as handset 1, all other handsets will need to be registered again from Step 1. R egistering y our phone This additional Handset is able to be used in conjunction with m odels DS815, DS825, DS845 and DS875 cordless telephones.
CONTENTS CONTENTS OF Y OUR O WNERS MANU AL 1 Installation & Safety Quick Start Guide Contents Introduction W elcome F eatures Included in your P ackage Battery Maintenance Preparing the Batter y P.
The DS805 is an optional handset and charger . It can only be used in conjunction with a compatible telephone such as the DS815, DS825, DS845 and DS875.
21 Charging contacts Charge LED Non functional key AC po wer adaptor input 18 19 20 21 18 20 Rear T op 3 DIGIT AL SPREAD SPECTRUM charge 19 900MHz Charge Base.
4 WELCOME Congratulations on your purchase of the Uniden DS805 extra handset. This phone is designed for reliability , long life and outstanding perfor mance utilising the latest in 900MHz Digital Spread T echnology . The DS805 is an optional handset and charger .
Handset Charge Base Rechar geable Battery AC Adaptor Belt Clip INCL UDED IN Y OUR P ACKA GE If any of these items are missing or damaged, contact your place of purchase . To get the most from your phone , please read this Owner’ s Manual thoroughly .
6 Battery use time (per charge) From full y charged F our and half hours continuous use . T en days when the handset is in the standby mode . A full charge will take at least 12 hours if ‘Batter y Lo w’ is displayed - ho wev er the phone will be ready for a short call after one hour .
7 If you are using an optional headset, you must still use the handset keypad for phone operations. ! headset jack HEADSET INSTALLA TION ADJUSTING THE RINGER AND EARPIECE V OL UME Ringer tone and volume The phone has four ringer tone and v olume combinations.
8 USING Y OUR NEW PHONE MAKING AND RECEIVING CALLS Basic phone operation Up to 7 Handsets may be registered to any one compatible T ele phone Base such as the DS815, DS825, DS845 and DS875.
9 During a call, you can transfer the call to another optional handset (maximum 7 handsets). 1. Press 2. Press [ handset No. ] The handset number is sho wn on the right side of the display .
10 2 way radio feature (using an optional handset) 2 wa y comm unications betw een the handsets using the intercom feature , can be achie v ed without the base anywhere , anytime . CALL W AITING/FLASH If the Call W aiting tone sounds during a call - Australia: Press , then to switch betw een callers.
11 3. Press - Store Name is display ed and a cursor flashes indicating that the display is ready for the name to be entered. If this screen appears, the selected memory location has a number alread y stored. 4. Use numeric key to enter the name . The name cannot ex ceed 13 characters.
12 Memory Dialing from Standby 1. Press once , the handset displays your programmed memory locations. 2. Press and or enter a two-digit number to select the memory location you would like to dial.
13 EDITING A STORED N AME AND PHONE NUMBER 1. Press and hold until MEMOR Y ST ORE is display ed. 2. Press and or enter a two-digit n umber to select the memory location you w ould like to edit. 3. Press - the screen displays the memory location number you ha ve selected.
14 MEMORY 02 DELETED MEMORY STORE 02 EMPTY 03 KA Y JONES ERASING A STORED N AME AND PHONE NUMBER 1. Press and hold until MEMOR Y STORE is displa yed. 2. Press and or enter a two-digit number to select the memory location you would like to edit. 3. Press - the memor y location number that y ou hav e selected is display ed.
15 Y ou must subscribe to the Caller ID ser vice from y our local telephone company to use these features. When the telephone rings, the Caller ID feature allo ws you to view the caller’s name and phone number on the displa y before you answ er the phone.
16 TOT AL: 00 Deleting a Caller ID message 1. Press - display the messag e to be deleted from the Caller ID list by pressing or . 2. Press . 3. Press or to indicate “Y es” or “No”. 4. Press . When you indicate ‘Y es’ - a tone sounds and the Caller ID message is deleted.
17 Using the Caller ID List Calling a party from the Caller ID list Y ou can place a call from the Caller ID list. The DS805 stores up to 60 messages . 1. Press - select the phone number that y ou want to dial by pressing or . 2. Press - the display ed phone number will be dialled automatically .
18 Y OUR NEW PHONE If your phone is not perfor ming to your expectations , please tr y these simple ste ps first before calling Uniden customer ser vice - QUICK REFERENCE CHART No dial tone Check that the phone line cord connectors at both ends are pushed in until they click.
W ARRANTY UNIDEN NEW ZEALAND LIMITED SER VICE DIVISION One Y ear Limited W arranty Important: Evidence of original purchase is required for warranty service.
© 2001 Uniden Australia Pty Limited Uniden New Zealand Limited FOR PUR CHASING A UNIDEN PHONE! THANK Y OU.
An important point after buying a device Uniden DS 805 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden DS 805 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden DS 805 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden DS 805 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden DS 805 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden DS 805, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden DS 805.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden DS 805. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden DS 805 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
