Instruction/ maintenance manual of the product DECT4086-3 Uniden
Go to page of 52
If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products! Need Help? Get answers 24/7 at our website: www.
Important Safety Instructions! When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of re, electric shock and injury to persons, including the following: This unit is NOT waterproof. DO NOT expose this unit to rain or moisture.
1 Installing Your Phone Set Up the Base Attach the stand Before you attach the stand, you have to decide if you want the phone to rest on a desk or hang on a wall. For desktop use, turn the stand so the locking tabs that say DESK are facing the base with the arrows pointing up.
2 Connect the power and telephone cords Connect the base AC adapter to the AC I N 7 .8 V jack and route the cord as shown: For desktop use For wall mount use TEL LINE 1/2 TEL LINE 2 AC IN 7.8V TEL LINE 1/2 TEL LINE 2 AC IN 7.8V Connect the included two-line telephone cord to the TE L LIN E 1/ 2 jack.
3 Place the phone on the wall Place the mounting slots over the pins on the wall plate, and slide the base down to lock it into place. Setup the Handset(s) Install the battery Unpack all handsets, battery packs, and battery covers. If any handset has the battery cover already attached, press in on the notch and slide the cover down and off.
4 Charge the battery If your phone came with any accessory handsets and chargers, connect a charger AC adapter to each charger's AC I N 8 V jack and set the plug into the notch as shown. (These adapters might already be connected.) Plug the other end of the adapter into a standard 120V AC power outlet.
5 Test the Connection Pick up the handset from t he base and press TALK . The phone should pick up line 1 automatically and change the display to show Talk , and you should hear a dial tone. When you get a dial tone, make a test call; press END to hang up.
6 Changing from Tone to Pulse Dialing Phones can communicate with the telephone network in two ways: tone (DTMF) or pulse dialing. If you know your phone company uses pulse dialing or the test call for line 1 did not work, follow these steps: With the phone in standby, press MENU .
7 Getting to Know Your Phone Parts of the Base If the key name is spelled out on the key itself, it's not labeled in the drawing below. Base keys and how they work Key name (and icon) What it does PHONEBOOK/ LEFT ( / ) In standby or during a call: open the phonebook.
8 Key name (and icon) What it does UP ( ) In standby: increase the ringer volume for line 1 or line 2. During a normal call: increase the earpiece volume. During a speakerphone call or while a message is playing: increase the speaker volume. In the menu or any list: move the cursor up one line.
9 Parts of the Handset Handset keys and how they work Key name (and icon) What it does UP ( ) In standby: increase the ringer volume for line 1 or line 2. During a call: increase the call volume. In the menu or any list: move the cursor up one line. - - - END During a call: hang up.
10 Key name (and icon) What it does CALLER ID/ RIGHT ( ) In standby or during a call: open the Caller ID list. During text entry: move the cursor to the right. - - SPEAKER ( ) Switch a normal call to the speakerphone (and back). - INTERCOM/ HOLD In standby: page another station using the intercom.
11 Reading the Displays On the base On the handset The table below shows the possible icons and what they mean. Since the icons appear based on what you're doing with the phone, you won't ever see all of these icons at the same time. Base Icon Handset Icon What it means or The accompanying information (in use, on hold, etc.
12 Base Icon Handset Icon What it means The ringer is turned off for 1) line 1 only, 2) line 2 onl y, or 3) both. Thi s station will not ring when a call comes in on the indicated lines. You have a vo ice message w aiting (see "Using Voice Message Notification" on page 34).
13 Using the Soft Keys Soft keys are controlled by the software: they will automatically change their function depending on what you're currently doing: Soft keys with the phone in standby On the.
14 If the description for a soft key is blank, that key doesn't currently have a function. Sometimes, the current function of a soft key can duplicate the function of a regular key. If this happens, you can press either key. When this manual refers to a soft key, it uses the soft key's description printed on a black background.
15 Entering Text on Your Phone When you want to enter text into your phone (for example, a name in the phonebook), use the twelve-key dial pad to enter the letters printed on the number keys. Here's how it works: The phone enters the letters in the order they appear on the key.
16 Using the Menus The menus are des igned to be as ea sy as possible. Some users don't even need the manual once they know how to perform these actions: If you don't press any keys for thirty seconds, the phone times out and exits the menu.
17 Close the menu On the handset, press END ; on the base, press MUTE/ EXIT . (If you open the menu duri ng a call, p ress BACK to back out of the menu without hanging up.) The next several pages list all the available menu options and how to use them.
18 Menu option: Use it to: Autotalk (Handset only) Turn on Auto Talk so you can answ er the phone just by picking up the handset from the cradle (without having to press any buttons). Any Key Answer (Handset only) Turn on Any Key Answer so you can answer the phone by pressing a key on the twelve-key dial pad.
19 When you select the Global Setup menu, the phone prompts you to select Line 1 or Line 2 . Then, you can choose one of the following options to change the global settings for that line: Menu option:.
20 Using Your Phone Working with Two Lines When performing common tasks, you can let the station use the primary line, or you can manually choose a particular line for each task. Using the primary line makes common tasks much simpler, but you will need to assign a primary line to each station (see below).
21 primary line assignment by manually choosing line for your current task. To assign a primary line, open the menu and select Handset Setup or Base Setup . Select Primary Line , then choose the line you want this station to connect to when it goes off hook: Line 1 Always connect to line 1, regardless of either line's status.
22 Changing the Volume You can set the volume of the ringer and speaker separately for the base and each handset; you can also set the earpiece volume on each handset. The available volume levels and how to change them are listed below; for each item, press UP to make it louder or DOWN to make it softer.
23 Using the lists Open the CID list Press CALLER ID/RIGHT . Open the redial list Press REDIAL/PAUSE . Scroll through the CID or redial list Press DOWN to scroll through the lis t from newest to oldest. Press UP to scroll from oldest to newest. Close the CID or redial list Press END on a handset or MUTE/EXIT on the base.
24 Delete Entry Erase this entry from the CID or redial list. Delete All Erase all entries from this station's CID or redial list. (This doesn't affect the CID or redial lists on any other stations.
25 When you get a Call Waiting call, the phone sounds a tone and displays any CID information received for the waiting call. To answer a Call Waiting call, press FLASH on the base or TALK/ FLASH on a handset. The phone company automatically puts the current call on hold and switches you to the waiting call.
26 Using the Phonebook Each station can store up to 100 entries in its phonebook, and each entry can have two different phone numbers. Open the phonebook Press PHONEBOOK/LEFT. Scroll through the entries Press DOWN to scroll through the phonebook from A to Z or UP to scroll from Z to A.
27 Edit Number1 Enter the primary number (up to 32 digits) for this entry exactly the way you would dial it. If you need the phone to wait before sending the next set of digits, press REDIAL/PAUSE to enter a two-second pause. If two seconds isn't long enough, you can enter as many pauses as you want.
28 Phonebook Menu Options Open the phonebook with the phone in standby, and press OPTIONS to open the phonebook menu. From the main phonebook screen, you have two options: Copy All Copy the whole phonebook to another station. (Y ou must have at least one cordless handset to use this multi-station feature.
29 Using Multi-station Features The expandable base works together with the accessory handsets to give you some useful multi-station features. (A station can be any cordless handset or the base.) You must have at least one accessory handset to use the features in this section.
30 To leave a conference call, hang up normally; all other stations remains connected to the call. If you conference line 1 and line 2 together (see page 21), the base and four cordless handsets can hold a seven-way call with both outside callers at the same time.
31 Using the Intercom Here are some things you need to know about using the intercom: Whenever the phone is in standby, you can make an intercom call between stations without using the phone line. You can make an intercom call from any station, but only two stations can be in an intercom call at any time.
32 Using Special Features Using Do Not Disturb The Do Not Disturb or DND feature turns off the ringers of the base and all handsets at the same time. With the phone in standby, press and hold DO NOT DISTURB on the base. The phone automatically turns on the answering system and shows Do Not Disturb in the display on all stations.
33 Use the number keys to set the time you want the alarm to ring; press O K when you're finished. Highlight the repeat setting and press SELECT . Select how often you want the alarm to ring—once only ( 1 time ), every day ( Daily ), or on a weekly basis ( Select Days )—then press OK .
34 Using Voice Message Notication This feature supports Frequency-Shift Keying (FSK) message notification. Contact your voice mail provider for more details. If you subscribe to a voice mail service, your phone can notify you when you have a new message waiting on either line.
35 Using the Answering System Each line has a separate answering system. Whenever you access the answering system, the phone prompts you to choose a line.
36 Delete your greeting Open the menu and select Ans. Setup . Select Line 1 or Line 2 , then select Greeting Options . While the system plays back the current greeting, press DELETE to erase the personal greeting for this line. (You can't erase the pre-recorded greeting.
37 Getting Your Messages Accessing your system from a handset (remote operation) You can access your system from a handset whenever the phone is in standby. Only one handset at a time can access the system through remote operation, and you can't use remote operation if the base is using the answering system.
38 To... From the base From a handse t (during remote operation) replay previous messages Press PHONEBOOK/LEFT repeatedly until you hear the message you want to replay. Press 1 repeatedly until you hear the message you want to replay. skip a message Press CALLER ID/RIGHT .
39 Using the System While You're Away from Home You can also operate your answering system from any touch-tone phone. Before you can use this feature, you have to program a security code. Programming a security code With the phone in standby, open the menu and select Ans.
40 Solving Problems If you have any trouble with your phone, try these simple steps first. If you still have a question, call our Customer Care Line listed on the front cover. If… Try… No stations can make or receive calls. Checking the telephone cord connection.
41 If… Try… No stations will display any Caller ID information. Letting calls ring at least twice before answering. Seeing if the call was placed through a switchboard. Checking with your telephone service provider to make sure your Caller ID service is active.
42 If… Try… I can’t hear the base speaker. Making sure call screening is turned on (see page 36). Changing the base speaker volume. - - Messages are incomplete. The incoming messages may be too long. Remind callers to leave a brief message. Deleting messages (the memory may be full).
43 radio-based wireless devices, such as room monitors, wireless contr oller s, or wire less headphones or speakers large florescent light fixtures (especially if they give off a b uzzi ng noise) other services that use your phone line, like alarm systems, intercom systems, or broadband Internet service Here are some hints for when the static is.
44 Plug the DSL filter into the telephone wall jack and plug your phone’s base into the filter. Make a test call to make sure the noise is gone. Resetting and Registering Handsets If you are having .
45 In about 30 seconds, the handset display should say Registration Complete . Press TALK/FLASH and make sure you get a dial tone. If... Try... you don't hear a dial tone the display says Registration Failed - - Making sure the handset is fully charged, then start over at step 1.
Important Information Terms Used In This Guide Accessory Handset An extra handset that can register to and be used with an expandable phone base. All accessory handsets must be registered to a base. Base The main part of the phone. It connects to your phone line and lets you make and receive calls.
With normal use, the battery should last about one year. Replace the battery when the talk time becomes short even when the battery is charged. To buy a replacement battery, call the Parts Department listed on the front cover.
isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to le a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment.
RF exposure information This product complies with FCC radiation exposure limits under the following conditions: The base must be placed to allow a minimum of 20 cm (8 inches) between the antenna and all persons during normal operation. The base must not be collocated or operated in conjunction wit h any other antenna or transmit ter.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective.
An important point after buying a device Uniden DECT4086-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden DECT4086-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden DECT4086-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden DECT4086-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden DECT4086-3 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden DECT4086-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden DECT4086-3.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden DECT4086-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden DECT4086-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
