Instruction/ maintenance manual of the product BT109 Uniden
Go to page of 16
B T108 and B T109 Bluetooth® Headsets Also in this package: 2 extra ear cushions AC (indoor) po wer adapter DC (car) pow er adapter (BT109 only) Questions? Problems? Get help on the web at ww w .uniden.com or call our Customer Ser vice line at 800-292-2294.
2 Getting to Know the Headset Using the headset at e xcessiv e volume can cause permanent hearing loss. T o reduce the risk of hearing damage, use the minimum volume lev el necessary (see page 12). What the buttons do The buttons activate the function after you release them.
3 What the LED colors mean Color State Meaning Red Steady The headset is curr ently charging . When the battery is fully charged, the LED turns o . Flashing The batt er y is low . Blue Flashing The headset is turned on. Slow ash (ev er y 3 seconds) The headset is pair ed to a Bluetooth device.
4 Charging the BT108 Charging the BT109 Connect the adapter to the po wer connector on the top of the headset, then plug it into a standar d 120 volt AC (r egular indoor) power outlet . Connect either adapter to the po wer connector on the top of the headset.
5 On your phone, start a search for Bluet ooth headsets or handsfree devices. ( This process ma y take several seconds , and it will be dierent for each phone; see your phone ’ s manual for detailed instructions.
6 Once the headset is paired: Whenever you turn the headset on, it will aut omatically tr y to connect to whatev er device it was connected to last. If the headset loses the connection (e.g., if your phone is out of r ange), it reconnects automatically .
7 clear . T ake a few minutes to mov e the headset around until you nd the best angle for the ear cushion. If you can ’t nd your sw eet spot or if the cushion doesn ’t t comf or tably in your ear , change it to one of the other siz es that came with the headset.
8 Available Features After the headset is connected, you can use the f ollowing fea tures: Make a call Just make the call from y our mobile phone as usual; your phone should automatically send the call to the headset . If your phone doesn ’t , press and hold Po wer for 2 seconds to send the call t o the headset manually .
9 Muting the microphone T o mute the microphone so the caller can’ t hear you, pr ess and hold both V olume Up and Volume Down f or about one second. The headset beeps periodically to remind you tha t the microphone is muted. P ress and hold the buttons again to turn the microphone back on.
10 If ... T ry ... The headset pair ed with my phone, but I can ’t hear anything through it . Making sure the call connected and is still active. Making sure the phone transf erred the call to the headset . Press and hold Po wer for two seconds t o transfer the call.
11 The headset can be connected only to devices that support the Bluetooth headset or hands- free pr ole. This pr oduct is not compatible with standard cor dless phones. Battery life W ith average use , the battery should provide about 9 hours of talk time and 8 days of standby time.
headset, too . T ransfer the call to your phone and see if the audio quality improves . If it doesn ’t, check around for things tha t might interfere with your phone. Safety and Handling Information For maximum product life, do not dr op , throw , or crush the headset.
Important Safety Instructions Uniden America Corporation DOES NO T represent this pr oduct to be waterproof . T o reduce the risk of re , electric al shock, or damage to the product, DO NOT e xpose this product to rain or moisture.
FCC Notice This device complies with part 15 of the FCC rules. Operation is subject to the follo wing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any in terference receiv ed, including interference that ma y cause undesired operation.
Lithium-polymer battery information This device con tains a lithium-polymer battery . The headset and batt er y must be recycled or disposed of properly . Contact your local waste management oce for informa tion on battery recycling or disposal. Two-Year Limited Warranty Important: Evidence of original purchase is required for w arranty service.
with the per formance of this warr anty . W arrant or , at its option, may replace the unit with a new or refurbished unit . THE LIMITED W ARR ANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE W ARR ANTY PE.
An important point after buying a device Uniden BT109 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden BT109 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden BT109 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden BT109 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden BT109 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden BT109, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden BT109.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden BT109. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden BT109 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
