Instruction/ maintenance manual of the product D-9330 NM Beko
Go to page of 12
D-9330 NM Instructions for use.
Safety first .........................................................../1 Electrical requirements ......................................./2 T ransportation instructions................................../2 Installation instructions ...................
Fig.1 1 2 3 4 4 5 7 8 9 4 13 14 543 6 12 11 10 12 12.
Fig.6 Fig.7 Fig.8 Fig.2 Fig.3 Fig.4 Fig.5 Fig.9 Fig.10 1 2 3 1 2 4 432.
Instruction Manual GB 1 Safety first! Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed. • Leave to stand for at least 4 hours before switching on, to allow compressor oil to settle, if transported horizontally .
Instruction Manual GB 2 Electrical requirements Before inserting the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply .
Instruction Manual GB 3 Suggested arrangement of food in the appliance Guidelines for obtaining optimum storage and hygiene: 1. The fridge compartment is for the short- term storage of fresh food and drinks. 2. The freezer compartment is rat ed and suitable for the freezing and storage of pre-frozen food.
Instruction Manual GB 4 shelves should not be covered with paper or other materials to allow free circulation of cool air . 10. Do not keep vegetable oil on door shelves. Keep the food packed, wrapped or covered. Allow hot food and beverages to cool before refrigerating.
Instruction Manual GB 5 Before operating Final Check Before you start using the appliance check that: 1. The feet have been adjusted for perfect leveling. 2. The interior is dry and air can circulate freely at the rear . 3. The interior is clean as recommended under "Cleaning and care.
Instruction Manual GB 6 How to use the accessories Crisper humidity controls This has been designed to keep your vegetables fresh, without losing moisture (Fig. 8) . For this purpose, cold air circulates around the crisper . The amount of cold air passing out of the crisper can be regulated with the controls found on the front of its cover .
Instruction Manual GB 7 Do’ s and don’ts Cleaning and care 1. We recommend that you switch of f the appliance at the socket outlet and pull out the mains plug before cleaning. 2. Never use any sharp instruments or abrasive substances, soap, household cleaner , detergent or wax polish for cleaning.
Instruction Manual GB T rouble - shooting If the appliance does not operate when switched on, check; • That the plug is inserted properly in the socket and that the power supply is on.
An important point after buying a device Beko D-9330 NM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko D-9330 NM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko D-9330 NM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko D-9330 NM you will learn all the available features of the product, as well as information on its operation. The information that you get Beko D-9330 NM will certainly help you make a decision on the purchase.
If you already are a holder of Beko D-9330 NM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko D-9330 NM.
However, one of the most important roles played by the user manual is to help in solving problems with Beko D-9330 NM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko D-9330 NM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
