Instruction/ maintenance manual of the product 100xr Uniden
Go to page of 8
RF REMO TE CONTROLLED VEHICLE SECURITY SYSTEM with Rolling Code and Code Learning T echnology Operating Guide Uniden New Zealand Limited 150 Harris Road East Tamaki Auckland New Zealand Phone: 0800 864336 (sales) Phone: 0800 486433 (service) Fax: 09 274 0009 Email: service@uniden.
V S1 1 00XR Operating Guide ® Page 2 CONGRA TULA TIONS From the moment you purchased this UNIDEN V ehicle Security System, you became a part of the UNIDEN family .
V S1 1 00XR Operating Guide ® Page 3 Button #2 Button #1 Button #3 T ABLE OF CONTENTS T O T AL PROTECTION l If a thief opens a door , the alarm immedi- ately sounds the siren and flashes the parking lights for 30 seconds.
V S1 1 00XR Operating Guide ® Page 4 ARMING There are two different ways to arm your alarm. T ell your dealer which is best for you: q Active Arming - (Default setting) Means : Using the remote to arm the alarm. 1. T urn your ignition OFF and close all doors.
V S1 1 00XR Operating Guide ® Page 5 This is useful if you know , based on experience, that your shock, glass-break, or other add-on sensor will false trigger , such as when you park near a construction site or other harsh environ- ment. T o bypass your alarm's sensors, 1.
V S1 1 00XR Operating Guide ® Page 6 FIRST - Press Button #2 THEN - P ress Button #1 If you lose your remote control, you can disarm your alarm with the ignition key and “VALET” button. While your alarm is either armed or triggered, turn the ignition switch ON , then EMERGENCY DISARM press and release the VALET button 3 times.
V S1 1 00XR Operating Guide ® Page 7 O THER FEA TURES • Multi-P oint Engine Immobiliser — This alarm can support up to 3 engine immobiliser relays.
V S1 1 00XR Operating Guide ® Page 8 F. V alet mode indicator — Flashes slowly if the ignition switch is turned OFF . G. AEI mode indicator — If the Automatic Engine Immobiliser is engaged the LED will be ON . H. T riggered zone indicator — If the alarm has been activated, the LED will flash for 30 secs.
An important point after buying a device Uniden 100xr (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden 100xr yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden 100xr - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden 100xr you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden 100xr will certainly help you make a decision on the purchase.
If you already are a holder of Uniden 100xr, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden 100xr.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden 100xr. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden 100xr along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
