Instruction/ maintenance manual of the product 802.3af UNICOM
Go to page of 9
Power over Ethernet Splitter 802.3af PoE Splitter U SER’S M ANU AL PN: POE-22001T.
Content Overview ........................................................... 1 Features ............................................................ 1 Hardware Description ...................................... 2 Package Contents .....................
Overview Unicom's new Power over Ethernet (PoE) Splitter Adapter provides Ethernet data and DC power to a network device that is not compliant with th e IEEE802.3af standard (non-PoE). This adapter effectively provides Ethernet data and DC power to a non-PoE device with a single cable and allows it to operate within a PoE network.
Package Contents (1) Power over Ethernet Splitter (2) DC Power Cables – 5.5x2.0mm and 5.5x2.5mm User's Manual PoE Splitter DC Power Cables User's Manual With adjustable output Figure 1-1. Package Contents Compare the contents of your Power over Ethernet Splitter package with the standard checklist above.
Hardware Description Unicom's Power over Ethernet Splitter Adapter has three connection ports, one LED indicator, and a voltage adjustment DIPswitch. Data In port: This is an RJ-45 Ethernet interface port for data transmission into the PoE Splitter.
System Power LED indicator DIPswitch: The DIPswitch changes the splitter voltage allowing for it to operate with a variety of products. It provides four voltage values – 5V, 7.5V, 9V and 12V. The default is 5V. Before adjusting the DIPswitch, disconnect the power from Splitter Adapter.
Installation To install the Power over Ethernet Splitter, please follow the steps below. 1. Use an RJ-45 cable to connect the Data I n port on the Power over Ethernet Splitter Adapter with the Data Ou t port of a PoE Hub.
Technical Specification Standard IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3af Power over Ethernet Power jack diameter (2) Power Cables, each with straight and a right angle plugs Plug dimension: 5.5 x 2.0mm, 5.5 x 2.5mm DIPswitch Four-segment output voltage switch Connector Data / Power In: 1 x RJ-45.
908 Canada Court City of Industry , C A 91748 U.S.A. Phone: 626.964.7873 or 800.346.6668 F ax: 626.964.7880 www .unicomlink.com e-mail: info@unicomlink.
An important point after buying a device UNICOM 802.3af (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought UNICOM 802.3af yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data UNICOM 802.3af - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, UNICOM 802.3af you will learn all the available features of the product, as well as information on its operation. The information that you get UNICOM 802.3af will certainly help you make a decision on the purchase.
If you already are a holder of UNICOM 802.3af, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime UNICOM 802.3af.
However, one of the most important roles played by the user manual is to help in solving problems with UNICOM 802.3af. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device UNICOM 802.3af along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
