Instruction/ maintenance manual of the product 2200 Ultimate Technology
Go to page of 12
2200 Series POS Bundle 2200 POS Bundle Installation Guide Thank you for selecting UTC RETAIL’s innovative 2200 Series Point of Sale bundle solution! This guide is designed to help you efficiently a ssemble the 2200 Series POS Bundle System. © 2008 UTC RET AIL.
2200 Series POS Bundle System Inst allation Guide This guide was prepared by UTC RETAIL to assist personnel with the installation of the bundle components. All attempts have been made to ensure that the information presented in this manual is correct.
© 2008 UTC RET AIL. All rights reserved. 11692012 Rev D Page 3 of 12 Table of Contents 2200 Series POS Bundle System Installation Guide ................................................................ 2 Product Information ...........................
© 2008 UTC RET AIL. All rights reserved. 11692012 Rev D Page 4 of 12 Product Information You will find the following components inside the 2200 Series POS Bundle System Box: • Safety Sheet • 2200.
Un-boxing the System 1. Open the point of sale box and remove the contents. 2. Remove all packing materials. Inst allation 1. Orient the cash drawer on its back side on your cash wrap (counter). Remove the keys. Locate the cash drawer cable package, labeled ‘APG cash drawer 320 Multipro cable ki t’.
4. Connect the printer USB cable from the printer to a USB port on the rear of the PC. 5. Connect the power cable from the printer power supply to the connector on the printer. Connect the AC cable to the printer power supply and then to a wall outlet or the optional Power Conditioner.
7. Remove the LCD, LCD VGA video cable and power supply from the LCD box. Connect the LCD VGA (Video) cable to the Video Port (Blue) on the back of the PC.
10. Connect the optional MSR (Magnetic Stripe Reader) to a USB Port. For instructions on the MSR bracket installation, refer to the install guide in cluded with the MSR bracket assembly.
12. Connect the optional Customer Pole Display cable to the serial port labeled Com 4 on the back of the PC. Figure 9: Rear View of PC 13. Connect the optional Inventory Scanner to a serial port on the back of the PC. Then plug the AC power adapter into a wall outlet or the optional Power Conditioner.
14. Connect a site provided network cable into the network jack on the back of the PC. Figure 11: Rear View of PC 15. Plug the PC power cord into the receptacle on the rear of the PC and then into the wall outlet or optional Power Conditioner. Figure 12: Rear View of PC © 2008 UTC RET AIL.
© 2008 UTC RET AIL. All rights reserved. 11692012 Rev D Page 11 of 12 Powering On Y our 2200 Series POS Bundle System 1. Remove the plastic protective sheets from the LCD Monitor and the optional customer display. 2. Turn on the ATX PC power by depressing the on/off switch located on the front left-hand side of the PC.
© 2008 UTC RET AIL. All rights reserved. 11692012 Rev D Page 12 of 12 T r oubleshooting Procedures The following table presents symptoms and solutions for problems potentially encountered when installing the 2200 Series Bundled POS System components.
An important point after buying a device Ultimate Technology 2200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultimate Technology 2200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultimate Technology 2200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultimate Technology 2200 you will learn all the available features of the product, as well as information on its operation. The information that you get Ultimate Technology 2200 will certainly help you make a decision on the purchase.
If you already are a holder of Ultimate Technology 2200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultimate Technology 2200.
However, one of the most important roles played by the user manual is to help in solving problems with Ultimate Technology 2200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultimate Technology 2200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
