Instruction/ maintenance manual of the product M7200 Tyco Electronics
Go to page of 44
Operator’s Manual MM23016 Nov/06 M7200 Series Digital Mobile Radio.
MM23016 MANUAL RE VISION HISTOR Y REV DATE REASON FOR CHANGE - Nov/06 Initial Release. M/A-COM Technical Publications woul d particularly appr eciate feedback on any erro rs found in this doc ument and suggestions on how the document co uld be improved.
MM23016 TABLE OF CONTENTS Page 1 SAFETY SYMBOL CONVENTION .................................................................................................... 6 2 RF ENERGY EXPOSURE INFORMATION .........................................................
MM23016 TABLE OF CONTENTS Page 6.18.2 Disabling Stealth Mode ................................................................................................. 25 6.19 ADJUSTING SIDE T ONE AUDIO LEVEL ...................................................
MM23016 TABLE OF CONTENTS Page FIGURES Figure 6-1: System Model ....................................................................................................... ................ 14 Figure 6-2: Scan Model ........................................
MM23016 1 SAFETY SYMBOL CONVENTION The following conventions are used throughout this ma nual to alert the user to general safety precautions that must be observed during all phases of operation, servi ce, and repair of this product.
MM23016 2 RF ENERGY EXPOSURE INFORMATION 2.1 RF ENERGY EXPOSURE AWAREN ESS, CONTROL INFORMATION, AND OPERATION INSTRUCTIONS FOR FCC OCCUPATIONAL USE REQUIREMENTS Before using your mobile two-way radio.
MM23016 2.2 COMPLIANCE WITH RF EXPOSURE STANDARDS Your MA/COM, Inc. M7200 mobile two-way radio is d esigned and tested to comply with a number of national and international standard s and guideline s (listed below) regarding human exposure to RF electromagnetic energy.
MM23016 2.2.1 Mobile Antennas Install the radio’s antenna (refer to Table 2-1 for applicable antenna part numbers) in the center of the vehicle’s roof. These mobile antenna installation guidelines are limited to metal body motor vehicles or vehicles with appropriate ground planes.
MM23016 3 OPERATION SAFETY RECOMMENDATIONS 3.1 TRANSMITTER HAZARDS The operator of any mobile radio should be aware of c ertain hazards common to the operation of vehicular radio transmitters.
MM23016 4 OPERATING RULES AND REGULATIONS Two-way FM radio systems must be operated in accord ance with the rules a nd regulations of the local, regional, or national government. In the United States, the M7200 mobile radio must be operated in accordance with the rules and regulations of the Federal Communications Commission (FCC).
MM23016 5 PRODUCT DESCRIPTION The M7200 mobile is a state-of-the-art radio th at operates seamlessly betwee n the 800 MHz frequency band and the 700 MHz frequency band. The M7 200 is designed to meet the critical communications demands of public service users and comp lies with MIL-STD-810F specifications.
MM23016 5.2 INTERCOM OPERATION The intercom option, a licensed option, allows th e M7200 radio to pass audio locally between control heads and not over the network. It gives users at mu ltiple control heads connected to the same radio the ability communicate with each other without transmi tting over-the-air.
MM23016 6 OPENSKY OPERATION 6.1 CH721 FRONT PANEL COMPONENTS The front panel of the control head includes a dot matrix display, controls for menu navigation, an emergency button, three pre-set buttons, a power button/rotar y volume dial, and a microphone connector.
MM23016 In addition, the front panel contains a light-level sen sor that samples ambient light levels for automatic display and button backlight brightness adjustments.
MM23016 6.2 POWER UP AND VOLUME CONTROL 6.2.1 Power Up 1. Rotate the Power/Volume Control knob clockwise to power on the radio. The display will illuminate when the radio powers up. 2. Wait for the power-up sequence to complete, which takes approximately ten (10) seconds.
MM23016 The User ID may be remembered from the previous log-in. (Refer to Secti on 6.5 for further details regarding log-off commands.) The password will be est ablished before the radio is put into operation. Contact the local OpenSky network administrator for more information.
MM23016 6.8 RADIO STATUS ICONS Status Icons indicate the various operating characteris tics of the radio. The icons show operating modes and conditions (see Table 6-2 ). The location of icons on the display may vary depending on configuration. Table 6-2: ICONS and Descriptions ICON DESCRIPTION Indicates data registration.
MM23016 TG a TG b TG c TG x TG y TG z TG d TG e TG f TG a TG d TG g TG h TG i TG = Talk Gr oup Profile 1 Profile 2 Profile 3 Figure 6-3: Personality Structure Example 6.10.2 Talk Groups A talk group represents a set of users that regularly need to communicate with one another.
MM23016 NAME TONE DESCRIPTION Emergency Cle ared Tone one long low-pitche d tone Sounds when and eme rgen cy is cleared Selectiv e Call Ring Tone a ringing to ne similar t o a telephone Ringing is rep.
MM23016 Table 6-4: Basic Menu Structure Menu Name Radio Displa ys (top and bot tom lines) Usage Notes To/From Dwell Display registration , RF s ync and transceiver st at us codes Engineering Display (Menu may not be available per programming.) bit-erro r rates and RSSI data Displays radio system connection data .
MM23016 Menu Name Radio Displa ys (top and bot tom lines) Usage Notes To/From Dwell Display See Previous Page current scan mode Scan Mode “ ScnModeMenu ” Use to turn scan on and off. Press MENU to return to dwell displa y. talk group “<” Talk group Lock Out “ LockOutMenu ” Use to choose a talk group for locking/unlocking.
MM23016 6.13 DUAL-TONE MULTI-FREQUENCY Dual-Tone Multi-Frequency (DTMF) is the system used by touch-tone telephones. DTMF assigns a specific tone frequency to each key so a microprocessor can easily identify its activation. The radio supports DTMF with a system model control head ( Figure 6-1 ).
MM23016 6.15 CHANGING THE ACTIVE PROFILE The radio can store up to sixteen (16) standard profil es, one of which is the currently active profile. To change the currently active profile: 1. Press up or down using until “ProfileMenu” is display ed. 2.
MM23016 6.18.1 Enabling Stealth Mode 1. Using , scroll through the menu until “StealthMenu” appears. 2. To immediately turn stealth mode on, press up or down with . 3. To turn stealth mode off, press an y button on the radio’s front panel. 6.18.
MM23016 6.21 ITTING VOICE CALLS the 6.2 RECEIVING AND TRAN SM As soon as the radio completes the startup/log-on/provision/self-test sequence and registers on OpenSky network, voice calls from talk groups in the active profile will be audible. 1.1 Receiving a Voice Call No action is required to receive a voice call.
MM23016 2. Use to toggle between “On” and “Off.” When intercom mode is turned on: Incoming voice calls will override intercom communi cations for the duration of the voice call.
MM23016 6.24.1 Lock Out a Talk Group 1. Use to scroll through the menu until “LockOutMenu” appears in the bottom line of the display. The name of a talk group in the curre ntly active profile will appear in the top line.
MM23016 Table 6-5: Scan Modes SCAN MODE EXPLANATION No Scan Eliminates distractions . Full communications (transmit and receive) on selected talk group. No calls received from other talk groups. Normal (Default) Full communications (transmit and receive) on the selected talk group.
MM23016 3. Press the MENU button to set the newly selected talk group as the priority talk group. 6.26 MAKING SELECTIVE CALLS Selective calling is a feature that allows two radio un its to obtain and utilize an independent voice path for a private call.
MM23016 b. If the other user accepts the call, the called user’s alias will appear in i nitiating caller’s display. The two are now in a private call until one ends the call, the call is terminated due to an init iated emergency, or the maximum time limit of ten (10) minutes is reached.
MM23016 Choosing and Sending the Message After specifying the destination radio’s User ID (S ection 6.27.1 ), the radio automatically allows you to choose a message. The current message scrolls across th e top line of the display. To choose a message: 1.
MM23016 the radio user. The entire selective alert message, in cluding the abbreviation , can include up to two hundred (200) text characters. 6.28 TELEPHONE INTERCONNECT CALLS (SYSTEM MODEL CONTROL H.
MM23016 • The OpenSky network administrator also determines if the emergency is declared on the currently selected talk group or a “default” emergency talk group. Again, this is based upon the radio’s currently active profile. A talk group upon which an emergency is declared on is consi dered an “emergency talk group.
MM23016 successfully cleared, the remove tone will sound at the initiating radio. Also, for an emergency call, the asterisk (*) will clear from the display. 6.29.4 Receiving an Emergency Call Upon receiving an emergency call declared by another radio: • An emergency tone sounds in the radio ’s sp eaker/headset (three short high-pitched beeps).
MM23016 6.30 ENCRYPTION In the OpenSky network, both data and voice use a 128-bit or 256-bit key encryption stand ard published by the Federal Information Processing Service (FIPS) , called Advanced Encry ption Standard (AES). AES is approved by the U.
MM23016 Perform the following to transm it or receive manually encrypted calls: 1. Press *32 on the keypad. 2. Enter the key (up to 16 digi ts). 3. Press the # key.
MM23016 1. Press until the “GPS” menu appears in the bottom line of the display. Current G PS coordinate latitude and longitude data continuously scr olls in the top line of the display in a degrees:minutes:seconds format. 2. Use to change to another menu.
MM23016 7 BASIC TROUBLESHOOTING If the radio is not operating properly, check Table 7-1 for likely causes. For add itional assistance, contact a qualified service technician. Table 7-1: Basic Troubleshooting SYMPTOM CAUSE SOLUTION Radio will not turn on.
MM23016 SYMPTOM CAUSE SOLUTION Control head randomly changes display. In multiple control head configurations, another user is operating the radio from another control head. None Encrypted calls cannot be made. Not authorized to use. Contact system administrator to request encryption privileges.
MM23016 8 TECHNICAL ASSISTANCE The Technical Assistance Center's (T AC) resources ar e available to help with overall system operation, maintenance, upgrades and product support. TAC is the point of contact when answers are needed to technical questions.
MM23016 9 WARRANTY A. M/A-COM, Inc. (hereinafter "Seller") warrants to the ori ginal purchaser for use (hereinafter "Bu yer") that Equipment manufactured by or for the Sell er shall be free from defects in material and workmansh ip, and shall conform t o its published specificatio ns.
MM23016 APPENDIX A KEYPAD REMAPPING If the keys have been remapped to provide new functions , fill in the following template for future reference. Button Function Button Function Emergency 1 Preset A .
M/A-COM Wireless Systems 221 Jefferson Ridge Parkway Lynchburg, Virginia 24501 (Outside USA, 1-434-385-2400) Toll Free 1- 800-528-77 11 www.macom-wireless.
An important point after buying a device Tyco Electronics M7200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tyco Electronics M7200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tyco Electronics M7200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tyco Electronics M7200 you will learn all the available features of the product, as well as information on its operation. The information that you get Tyco Electronics M7200 will certainly help you make a decision on the purchase.
If you already are a holder of Tyco Electronics M7200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tyco Electronics M7200.
However, one of the most important roles played by the user manual is to help in solving problems with Tyco Electronics M7200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tyco Electronics M7200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
