Instruction/ maintenance manual of the product TBC-80SD, 80SB Turbo Air
Go to page of 13
T urbo air Speeds Up the P ace of Inno vation Horizontal Bottle Cooler Installation and Operation Manual Please read this manual completely before attempting to install or operate this equipment! TBC-.
SPECIFICATIONS ........................................................................................... 2 SERIAL NUMBER ............................................................................................ 2 INSTALLATION OF THE BOTTOM SHELVES .
3 Turbo air * Note: The size and quantities of the bottom shelves can be different according to model number. INST ALLA TION OF THE BO TT OM SHEL VES 1) Before adding cans or bottles to cooler, please install bottom shelves.
4 Turbo air INST ALLA TION OF THE DIVIDERS 1) To re-position divider, push back wards. 2) Spring in back of divider point ‘C’ will be shorten to about 1/2 inch. 3) Front of divider will be able to remove from point ‘A’ and ‘B’. 4) Position divider in the hole, point ‘C’ where you would like it.
5 Turbo air INST ALLA TION OF THE OPENER KIT 1) Bottle opener kit is inside cabinet. 2) On the front outside wall of bottle cooler, there are screws. 3) Hook the opener kit onto the screws, like drawing 1 . 4) Push down so head of screw will insert into smaller opening, like drawing 2 .
6 Turbo air 1. In direction of arrow. 2. Grip the bottle tightly so it will not fall on removing cap. 3. The cap will drop to bottom of opener case. 4.
7 Turbo air 1. GOOD AIR CIRCULA TION - Do not place any object that will restrict air flow in front or back grills. - Turbo air highly recommends that there is ample space in rear of unit.
8 Turbo air CLEANING 1. PO WER CORD - Be sure the power cord is connected to the proper voltage. - A protected circuit of the correct voltage and amperage must be run for connection of the line cord. - Turn ‘off’ the power switch before disconnecting the power cord, whenever performing maintenance functions or cleaning the refrigerated cabinet.
9 Turbo air B ASIC OPERA TION TBC-24SD, TBC-24SB TBC-36SD, TBC-36SB TBC-50SD, TBC-50SB TBC-65SD, TBC-65SB TBC-80SD, TBC-80SB TBC-95SD, TBC-95SB 1. The controller(thermostat) is located at the right inside of the unit. 2. The factory setting for the control is ‘5’, and maintains about 38 ˚ F (3 ˚ C) inside.
10 Turbo air BEFORE REQUESTING SER VICE SYMPT OMS CA USES SOLUTIONS Cooler is freezing products The unit does not refrigerate at all. The unit does not refrigerate well. There is a loud noise. There are dew-dr ops on the unit exterior . There are dew-dr ops on the unit interior .
11 Turbo air W arranty Claims All claims for labor or parts must be made directly through Turbo Air. If unit was manufactured more than one year, proof of purchase must be faxed in or sent with claim.
12 Turbo air What Is Not Co vered By This W arranty Turbo Air’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this warranty.
1250 Victoria street Carson, CA 90746 U.S.A & Canada Toll Free 800-627-0032 For Service 800-381-7770 TEL: 310-900-1000 FAX: 310-900-1077 http://www.
An important point after buying a device Turbo Air TBC-80SD, 80SB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Turbo Air TBC-80SD, 80SB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Turbo Air TBC-80SD, 80SB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Turbo Air TBC-80SD, 80SB you will learn all the available features of the product, as well as information on its operation. The information that you get Turbo Air TBC-80SD, 80SB will certainly help you make a decision on the purchase.
If you already are a holder of Turbo Air TBC-80SD, 80SB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Turbo Air TBC-80SD, 80SB.
However, one of the most important roles played by the user manual is to help in solving problems with Turbo Air TBC-80SD, 80SB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Turbo Air TBC-80SD, 80SB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
