Instruction/ maintenance manual of the product 1290Z Trust
Go to page of 25
1290Z POWERC@M OPTICAL ZOOM UK L I F E I S M O R E ! T R U S T U S T R U S T . C O M IT User’s manual Version 1.0.
1290Z POWERC@M OPTICAL ZOOM Thank you for your purc hase. Register your product via our Internet site at www.trust.com/register, so that you will be eligible for optimal guarantee and service support. You will also be automatically informed of the development of your and other Trust products.
1290Z POWERC@M OPTICAL ZOOM L I F E I S M O R E ! T R U S T U S T R U S T . C O M Fig. 1a Fig. 1b Fig. 1c Fig.1d Fig. 2 Fig. 3 Fig.4.
1290Z POWERC@M OPTICAL ZOOM . C O M UK DE FR IT ES NL PL PT Fig. 5 Fig. 6 Fig.7 Fig. 8a Fig.8b Fig. 8c L I F E I S M O R E ! T R U S T U S T R U S T.
TRUST 1290Z POW ERC@M OPTICAL ZOOM ! Read the ‘Quick Inst allation Guide’ before using the camera for the first time. The basic functions of the camera are described here. CONTENTS 1 Int duction 2 ro 1.1 Some general comments about photography 2 2 Safety 2 2.
TRUST 1290Z POW ERC@M OPTICAL ZOOM 1 Introduction This instruction manual is for users of the TRUST 1290Z POW ERC@M OPTICAL ZOOM. The camera is equipped with a 4 megapixel sensor and an optical z oom lens. The photos are saved on the memory card supplied w ith the camera.
TRUST 1290Z POW ERC@M OPTICAL ZOOM 2.1 Batteries - The Duracell Ultra batteries supplied with the device are not rechargeable. Do not try to recharge these batteries. This can give rise to danger of an explosion. - Do not throw the batteries into a fire.
TRUST 1290Z POW ERC@M OPTICAL ZOOM Item Explanation Description image capturing circ uitry. Make sure that the lens remains free of dust and f ingerprints; take care not t o scratch the lens. 8 + 10 Viewfinder The viewfinder is used to determine the format of the photograph and it s composition.
TRUST 1290Z POW ERC@M OPTICAL ZOOM Preparing th e camera for use 5 Inserting and removing the batteri es Follow the instructions given below to insert or remove the batteries N.B.: make sure the camera is turned off. Open the battery cover and insert the batteries into t he battery compartment as indicated on the inside of the battery cover.
TRUST 1290Z POW ERC@M OPTICAL ZOOM Symbol Mode Description Photo, Playback, Video No memory card in the camera. Photo, Playback, Video The camera is unable to recognize the card. Check that the card has been inserted correctly. Format the card using the external card reader.
TRUST 1290Z POW ERC@M OPTICAL ZOOM 3. Select [DATE SETTING] using the “ Ç ” butt on or the “ È “ button 4. Press the “ENTER” button. See Figure 4. 5. Use the “ Ç ” or “ È ” butt on to select [YE AR/MONTH/DAY/HOUR/ MINUTE/ OPTION] Use the “ Å ” or “ Æ ” button to adj ust the setting 6.
TRUST 1290Z POW ERC@M OPTICAL ZOOM Symbol Mode Description Night view Used to take phot ographs when little light is available. The camera uses a longer exposure time. The f lash will be used. N.B.: the use of a tripod is recommended when the camera is set to this mode.
TRUST 1290Z POW ERC@M OPTICAL ZOOM Symbol St atus Function Automatic The camera automatically uses the f lash when so required. On The flash will be used f or all photographs. This is ideal when fill-in flash is needed (against the light). N.B.: the flash is turned off in burst mode.
TRUST 1290Z POW ERC@M OPTICAL ZOOM Enlarging photos You can use the Zoom buttons (T)/(W) to display a photograph in more detail. The default zoom setting is 1.0x Press the zoom-in button (T) to increase the zoom factor from 1.0x to 4.0x in 1.0x increments.
TRUST 1290Z POW ERC@M OPTICAL ZOOM 2. The Trus t Software Installer window wi ll be displayed (Figure 5). Select the language (in the top right-hand corner) you wish to use during the installation. 3. Select ‘Install driver’ 4. Follow the directions displayed on the monitor, and restart the computer if so advised.
TRUST 1290Z POW ERC@M OPTICAL ZOOM 1. Connect one end of the video cable to the camera’s video-out connection. (24, Figure 1d) 2. Connect the other end of the video cable to your TV. Your T V needs an input for video signals (yellow RCA plug). The yellow plug is used for the image signal.
TRUST 1290Z POW ERC@M OPTICAL ZOOM [100] [200] [ISO Sensitivity] [400] Set the ISO sensitivity. The amount of light required to tak e a good photo decreases with increase in ISO setting. [Exposure] (also for the Video mode) [0.00] Set the exposure time.
TRUST 1290Z POW ERC@M OPTICAL ZOOM Setting Options Explanation [Quantity] Date Print, prints the date on the print. The number can be set between 0 and 99 [Slide Show] Star t slide show. Press the “ENTER” button to start/stop the slide show. Table 8: settings in the Play back mode 11.
TRUST 1290Z POW ERC@M OPTICAL ZOOM 12.2 MGI PhotoSuite SE version 4. 0 Installation 1. Insert the CD-ROM in your CD-ROM driv e. Trust Installer Æ “Install sof tware” Æ “MGI PhotoSuite 4 SE”. 2. Select the required language for t he program. Click ‘OK’.
TRUST 1290Z POW ERC@M OPTICAL ZOOM 2. Click the prog ram you wish to delete, and then cli ck the “delete” button 3. Follow the instructions displayed on the monitor.
TRUST 1290Z POW ERC@M OPTICAL ZOOM Message Solution [Card Protected] Memory card is w rite-protected, remove the card’s write protection. [Open the Lens Cover] The lens cover is still clos ed. Open the lens cover. [No Image] No images on the memory card.
TRUST 1290Z POW ERC@M OPTICAL ZOOM Problem Cause Possible solution Windows ME and Windows 2000: An "Unsafe Removal Device Detected" error message appears when the USB cable is unplugged from the computer. Use if the "Saf e Removal of USB Device" procedure is recommended when removing USB devices.
TRUST 1290Z POW ERC@M OPTICAL ZOOM 15 Technical specifications 19 UK Image Sensor Type: CCD Resolution: 4M pixels Digital zoom 2x for taking photos 4x for playback, in 1.0 increments Still image capture 2272 x 1704 (photo) 1600 x 1200 (Standard) 1280 x 960 (Basic) 640 x 480 (Economy) Colour TFT LCD Size: 1.
TRUST 1290Z POW ERC@M OPTICAL ZOOM - Excluded from the warranty: • Damag e caused by accidents or disasters, such as f ire, flood, earthquakes, war, vandalism or theft. • Incompatibility with other hardware/software which is not stated in the minimum system req uirements.
CUSTOMER CARE CENTERS 24 HOURS free serv ice: ww w.trust.com Resident s in the UK and Ireland shou ld contact : Mon - Fri From 8: 00 - 16:0 0 UK Office Phone +44- (0)845-60 90036 Fax +31- (0)78-654 32.
An important point after buying a device Trust 1290Z (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Trust 1290Z yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Trust 1290Z - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Trust 1290Z you will learn all the available features of the product, as well as information on its operation. The information that you get Trust 1290Z will certainly help you make a decision on the purchase.
If you already are a holder of Trust 1290Z, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Trust 1290Z.
However, one of the most important roles played by the user manual is to help in solving problems with Trust 1290Z. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Trust 1290Z along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
