Instruction/ maintenance manual of the product TMC-34-SS True Manufacturing Company
Go to page of 16
............ www.truemfg.com ............ TABLE OF CONTENTS Safety Information Safety Precautions 1 Proper Disposal 2 Connecting Electricity 3 Adapter Plugs 3 Installation / Operation Instructions Own.
............ www.truemfg.com ............ True Food Service Equipment, Inc..
............ www.truemfg.com ............ SAFETY INFORMATION True Food Service Equipment, Inc. 1 1 This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used. Do not allow children to climb, stand or hang on the shelves in the refrigerator.
............ www.truemfg.com ............ True Food Service Equipment, Inc. SAFETY INFORMATION 2 2 PROPER DISPOSAL OF THE REFRIGERATOR DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER USE AN EXTENSION CORD! TRUE will not warranty any refrigerator that has been connected to an extension cord.
The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
............ www.truemfg.com ............ True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS 4 4 To insure that your unit works properly from the first day, it must be installed properly. We highly recommend a trained refrigeration mechanic and electrician install your True equipment.
............ www.truemfg.com ............ INSTALLATION / OPERATION INSTRUCTIONS True Food Service Equipment, Inc. 5 5 Step 2 A. Remove skid by using a phillips head screw- driver and an adjustable wrench. B. For easy removal from the skid, unscrew and remove grill from the back of the cooler.
Install the desired number of shims (in pairs as shown in figure 3), making sure the slots in the shim are in contact with the castor mounting bolts. Tighten and secure the shims and castor(s). Remove 6” block and check to determine if cabi- net is level.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 7 7 INSTALLATION / OPERATION INSTRUCTIONS 115 Volt Amps 20 30 40 50 60 70 80 90 100 120 140 160 Distance in Feet to Center of Load.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 8 8 INSTALLATION / OPERATION INSTRUCTIONS Step 5 A. The compressor is ready to operate. Plug in the cooler. B. Check the temperature control setting in the upper right of the cabinet interior.
MAINTENANCE, CARE & CLEANING REQUIRED TOOLS: • Phillips Screwdriver • Stiff Bristle Brush • Adjustable Wrench • Vacuum Cleaner Step 1 Disconnect power to unit. Step 2 Take off rear lower grill assembly by removing (2) side screws. Step 3 Remove bolts connecting frame rail cross bar to allow access to compressor.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 10 10 MAINTENANCE, CARE & CLEANING Condensing Unit Airflow Airflow Airflow Condenser IMPORTANT WARRANTY INFORMATION Condensers accumulate dirt and require cleaning every 30 days.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 11 11 MAINTENANCE, CARE & CLEANING CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces.
............ www.truemfg.com ............ True Food Service Equipment, Inc. MAINTENANCE, CARE & CLEANING 12 12 To clean interior of cooler move the unit close to a floor drain. Remove floor racks from inside of the unit. Wash interior of the tank.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 13 13 MAINTENANCE, CARE & CLEANING TERMS: Cut-out - Temperature sensed by the controller that shuts the compressor off. Cut-in - Temperature sensed by the controller that turns the compressor on.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 14 14 WARRANTY INFORMATION (U.S.A & CANADA ONLY!) ONE YEAR PARTS & LABOR WARRANTY TRUE warrants to the original purc.
An important point after buying a device True Manufacturing Company TMC-34-SS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought True Manufacturing Company TMC-34-SS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data True Manufacturing Company TMC-34-SS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, True Manufacturing Company TMC-34-SS you will learn all the available features of the product, as well as information on its operation. The information that you get True Manufacturing Company TMC-34-SS will certainly help you make a decision on the purchase.
If you already are a holder of True Manufacturing Company TMC-34-SS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime True Manufacturing Company TMC-34-SS.
However, one of the most important roles played by the user manual is to help in solving problems with True Manufacturing Company TMC-34-SS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device True Manufacturing Company TMC-34-SS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
