Instruction/ maintenance manual of the product TD-50-18-S-LT True Manufacturing Company
Go to page of 23
............ www .truemfg.com ............ T ABLE OF CONTENTS Safety Information Safety Precautions 1 Proper Disposal 2 Connecting Electricity 3 Adapter Plugs 3 Installation / Operation Instructions O.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc..
............ www .truemfg.com ............ SAFETY INFORMA TION T rue Food Service Equipment, Inc. 1 1 • This refriger ator must be properly installed and located in accordance with the Installation Instructions before it is used. • Do not allow childr en to climb, stand or hang on the shelves in the r efr ig erator .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. SAFETY INFORMA TION 2 2 PROPER DISPOSAL OF THE REFRIGERA TOR DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER USE AN EXTENSION CORD! TRUE will not warranty any refrigerator that has been connected to an extension cord.
The power cor d of this appliance is equipped with a 3-prong (gr ounding) plug which mates with a standard 3-prong (g rounding) wall outlet to minimize the possibility of electric shock hazard from this appliance. Have the w all outlet and circuit chec ked by a qualified electrician to make sure the outlet is properl y grounded.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. INST ALLA TION / OPERA TION INSTRUCTIONS 4 4 T o insure that your unit w orks properl y from the first day , it must be installed properly . W e highly recommend a trained r efr ig eration mechanic and electrician install your T r ue equipment.
............ www .truemfg.com ............ INST ALLA TION / OPERA TION INSTRUCTIONS T rue Food Service Equipment, Inc. 5 5 TOOLS REQUIRED: • Phillips screw driver • 3/8” socket or 3/8” wrench Step 2 A. Use a phillips screw div er and remov e four screws fr om the L-bracket connected the unit to the wood skid (see imag e 1).
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 6 6 CONDUCTORS AND CIRCUITS Wire Gauge for 2% Voltage Drop in Supply Circuits.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 7 7 Step 1 - Position Cabinet Allow one inch betw een the wall and rear of the refriger ated Bar Equipment to assure proper ventilation. For Glass & Plate Chillers/Frosters 3 inches betw een the wall and rear of the cabinet will assure proper v entilation.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 8 8 INST ALLA TION / OPERA TION INSTRUCTIONS Step 4 A. Bef ore your ne w unit is connected to a power suppl y , chec k the incoming voltag e with a voltmeter . If anything less than 100% of the rated voltag e for oper ation is noted, correct immediately .
INST ALL DRAFT ARM continued... Insert air hose (one inch plastic tube) in draft arm, being careful not to disturb insulation. Remove top cov er of draft arm and attach air hose clip to the insulating sleeve at the top of the dr aft arm. Replace top cover .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 10 10 O F F 9 8 7 6 5 4 3 2 1 SHEL VING and BIN DIVIDER INST ALLA TION / OPERA TION INST ALLA TION / OPERA TION INSTRUCTIONS SHELF INST ALLA TION: A. Hook shelf clips onto shelf standards.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 11 11 INST ALLA TION / OPERA TION INSTRUCTIONS Dispensing pressures differ according to: • The type of draft dispensing .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 12 12 INST ALLA TION / OPERA TION INSTRUCTIONS Flat Beer - Description: Foamy head disappears quickly . Beer lacks usual zestful brewery fresh flavor . • CO 2 turned of f when not in use.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 13 13 MAINTENANCE, CARE & CLEANING TERMS: Cut-out - T emperature sensed by the controller that shuts the compressor off. Cut-in - T emperature sensed by the controller that turns the compressor on.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 14 14 Follow these instructions at ALL times when you replace a CO 2 gas cylinder: 1. Close cylinder at "A". 2. Remov e tap "D" from bar rel. Pull pressure release ring on body of tap to release pr essure remaining in line.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 15 15 ............ www .truemfg.com ............ 15 Draught dispensers, regardless of design, must be cleaned at least ev er y tw o weeks. Flushing your draught dispenser with water onl y is not enough.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 16 16 MAINTENANCE, CARE & CLEANING MAINTENANCE, CARE & CLEANING CLEANING THE CONDENSER COIL When using electrical .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 17 17 Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss, and lost sales... which are not covered by warranty .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 18 18 MAINTENANCE, CARE & CLEANING CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 19 19 MAINTENANCE, CARE & CLEANING Recommended cleaners for certain situations / environments of stainless steel A) Soap, ammonia and detergent medallion applied with a c loth or sponge can be used f or routine cleaning.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 20 20 ............ www .truemfg.com ............ INST ALLA TION / OPERA TION INSTRUCTIONS Be careful when remo ving the light bulb. Please be a ware of y our local ordinances in disposing old f lorescent bulbs.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. T RUE R EFRIGERA TION MADE IN SINCE 1945 U .S.A. TM 21 21 W ARRANTY INFORMA TION (U.
An important point after buying a device True Manufacturing Company TD-50-18-S-LT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought True Manufacturing Company TD-50-18-S-LT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data True Manufacturing Company TD-50-18-S-LT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, True Manufacturing Company TD-50-18-S-LT you will learn all the available features of the product, as well as information on its operation. The information that you get True Manufacturing Company TD-50-18-S-LT will certainly help you make a decision on the purchase.
If you already are a holder of True Manufacturing Company TD-50-18-S-LT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime True Manufacturing Company TD-50-18-S-LT.
However, one of the most important roles played by the user manual is to help in solving problems with True Manufacturing Company TD-50-18-S-LT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device True Manufacturing Company TD-50-18-S-LT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
