Instruction/ maintenance manual of the product TCGR-50 True Manufacturing Company
Go to page of 22
............ www .truemfg.com ............ INST ALLA TION MANUAL FOR TCGR DISPLA Y CASES (REFRIGERA TED BAKER Y & COLD DELI) MODELS CUR VED GLASS DISPLA Y CASES - REFRIGERA TED BAKER Y & COLD DELI - CONGRA TULA TIONS! Y ou have just purchased the finest commercial refrigeration available.
.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 1 1 SAFETY INFORMA TION • This display case must be pr operly installed and located in accordance with the Installation Instructions before it is used. • Do not allow childr en to climb, stand or hang on the shelves in the displa y case.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 2 2 SAFETY INFORMA TION PROPER DISPOSAL OF THE DISPLA Y CASE DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER USE AN EXTENSION CORD! TRUE will not warranty any display case that has been connected to an extension cord.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 3 3 Bef ore your ne w display case is connected to a power suppl y , chec k the incoming voltag e with a voltmeter . If anything less than 100% of the rated voltag e f or operation is noted, correct immediately .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 4 4 INST ALLA TION / OPERA TION INSTRUCTIONS T o insure that your unit wor ks properl y from the first day , it must be installed properly . W e highly recommend a trained mec hanic and electrician install your T r ue equipment.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 5 5 INST ALLA TION / OPERA TION INSTRUCTIONS TOOLS REQUIRED: • Phillips screw driver • 3 / 8 ” (9.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 6 6 INST ALLA TION / OPERA TION INSTRUCTIONS Step 4 NOTE Hard wiring for a 30 amp circuit is required on specific Bakery Cases. A. Before y our new unit is connected to a po wer supply , check the incoming v oltage with a voltmeter .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 7 7 INST ALLA TION / OPERA TION INSTRUCTIONS CONDUCTORS AND CIRCUITS Wire Gauge for 2% Voltage Drop in Supply Circuits.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 8 8 Step 5 A. The compressor is r eady to oper ate. Plug in the display case. B. Check the temperature control setting in the lower right of the cabinet backside. The setting should be at No.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 9 9 INST ALLA TION / OPERA TION INSTRUCTIONS SHEL VING INST ALLA TION (REFRIGERA TED BAKERY) SHELF INST ALLA TION: A. Lift each door up and out of track (do not dis- connect elastic tubing).
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 10 10 INST ALLA TION / OPERA TION INSTRUCTIONS SHEL VING INST ALLA TION (COLD DELI) SHELF INST ALLA TION: A. Lift each door up and out of track (do not dis- connect elastic tubing).
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 11 11 INST ALLA TION / OPERA TION INSTRUCTIONS OPTIONAL (INST ALLING OPTIONAL CASTORS) CASTOR INST ALLA TION: TOOLS REQUIRED: • Castor wrenc h (if not included contact T r ue) • Adjustable wrenc h NOTE Castors not available for hard wired or remote models.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 12 12 INST ALLA TION / OPERA TION INSTRUCTIONS FORMICA KIT INST ALLA TION: FORMICA KIT COMPONENTS: (2) F or mica T op End P anels 10 3 / 4 "w x 33"h (27.3 cm x 83.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 13 13 MAINTENANCE, CARE & CLEANING • The e xterior may be wiped clean with mild soap and water . The use of stainless steel cleaners or other such solv ents is not recommended on plastic parts.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 14 14 MAINTENANCE, CARE & CLEANING LIGHT BULB REPLACEMENT SHELF MOUNTED BULB REPLACEMENT : WARNING When replacing a light bulb make sure power to the unit is either turned off or unplugged.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 15 15 MAINTENANCE, CARE & CLEANING TEMPERA TURE CONTROL ADJUSTMENT FOR HIGH AL TITUDE ONL Y! TERMS: • Cut-out - T emperature sensed by the controller that shuts the compressor off.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 16 16 CLEANING THE CONDENSER COIL When using electrical appliances, basic safety precautions should be followed, including the following CONDENSER CLEANING: TOOLS REQUIRED: • Phillips scre wdriver • Stiff br istle brush • Adjustable wrench • V acuum A.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 17 17 Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss, and lost sales... which are not covered by warranty .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 18 18 CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 19 19 Recommended cleaners f or cer tain situations / environments of stainless steel A) Soap, ammonia and detergent medallion applied with a cloth or spong e can be used for routine cleaning.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 20 20 W ARRANTY INFORMA TION (U.S.A. and Canada ONL Y!) ONE YEAR P ARTS & LABOR W ARRANTY TRUE warrants to the origina.
An important point after buying a device True Manufacturing Company TCGR-50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought True Manufacturing Company TCGR-50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data True Manufacturing Company TCGR-50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, True Manufacturing Company TCGR-50 you will learn all the available features of the product, as well as information on its operation. The information that you get True Manufacturing Company TCGR-50 will certainly help you make a decision on the purchase.
If you already are a holder of True Manufacturing Company TCGR-50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime True Manufacturing Company TCGR-50.
However, one of the most important roles played by the user manual is to help in solving problems with True Manufacturing Company TCGR-50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device True Manufacturing Company TCGR-50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
