Instruction/ maintenance manual of the product TCGD-50 True Manufacturing Company
Go to page of 15
............ www .truemfg.com ............ INST ALLA TION MANUAL FOR TCGD DISPLA Y CASES (DR Y BAKER Y) MODELS CUR VED GLASS DISPLA Y CASES - DR Y BAKER Y - CONGRA TULA TIONS! Y ou have just purchased the finest display case available. Y ou can expect many years of trouble-free operation.
.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 1 1 SAFETY INFORMA TION • This display case must be pr operly installed and located in accordance with the Installation Instructions before it is used. • Do not allow childr en to climb, stand or hang on the shelves in the displa y case.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 2 2 SAFETY INFORMA TION PROPER DISPOSAL OF THE DISPLA Y CASE DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 3 3 Bef ore your ne w display case is connected to a power suppl y , chec k the incoming voltag e with a voltmeter . If anything less than 100% of the rated voltag e f or operation is noted, correct immediately .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 4 4 INST ALLA TION / OPERA TION INSTRUCTIONS T o insure that your unit wor ks properl y from the first day , it must be installed properly . W e highly recommend a trained mec hanic and electrician install your T r ue equipment.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 5 5 INST ALLA TION / OPERA TION INSTRUCTIONS TOOLS REQUIRED: • Phillips screw driver • 3 / 8 ” (9.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 6 6 INST ALLA TION / OPERA TION INSTRUCTIONS Step 4 NOTE Hard wiring is required on standard "Dry" Baker y Cases. NOTE Optional 12" (30.5 cm) corded model available, fac- tory installed only .
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 7 7 INST ALLA TION / OPERA TION INSTRUCTIONS CONDUCTORS AND CIRCUITS Wire Guage for 2% V oltage Drop in Supply Circuits.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 8 8 INST ALLA TION / OPERA TION INSTRUCTIONS SHEL VING INST ALLA TION ("DRY" BAKERY) SHELF INST ALLA TION: A. Lift each door up and out of track (do not dis- connect elastic tubing).
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 9 9 INST ALLA TION / OPERA TION INSTRUCTIONS CASTOR INST ALLA TION: TOOLS REQUIRED: • Castor wrenc h (if not included contact T rue) • Adjustable wrenc h NOTE Castors not available for hard wired models.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 10 10 INST ALLA TION / OPERA TION INSTRUCTIONS FORMICA KIT INST ALLA TION: FORMICA KIT COMPONENTS: (2) F or mica T op End Panels 10 3 / 4 "w x 33"h (27.3 cm x 83.8 cm).
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 11 11 MAINTENANCE, CARE & CLEANING • The e xterior may be wiped clean with mild soap and water . Use a g ood stainless cleaner on coun- tertop. CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel sur - faces.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 12 12 MAINTENANCE, CARE & CLEANING LIGHT BULB REPLACEMENT SHELF MOUNTED BULB REPLACEMENT : WARNING When replacing a light bulb make sure power to the unit is either turned off or unplugged.
............ www .truemfg.com ............ T rue Food Service Equipment, Inc. 13 13 W ARRANTY INFORMA TION (U.S.A. and Canada ONL Y!) note: warranty information regarding refrigeration components not applicable to non-refrigerated cabinets.
An important point after buying a device True Manufacturing Company TCGD-50 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought True Manufacturing Company TCGD-50 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data True Manufacturing Company TCGD-50 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, True Manufacturing Company TCGD-50 you will learn all the available features of the product, as well as information on its operation. The information that you get True Manufacturing Company TCGD-50 will certainly help you make a decision on the purchase.
If you already are a holder of True Manufacturing Company TCGD-50, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime True Manufacturing Company TCGD-50.
However, one of the most important roles played by the user manual is to help in solving problems with True Manufacturing Company TCGD-50. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device True Manufacturing Company TCGD-50 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
