Instruction/ maintenance manual of the product T-35 True Manufacturing Company
Go to page of 24
............ www.truemfg.com ............ TABLE OF CONTENTS Safety Information Safety Precautions 1 TSD Do’s and Don’ts 2 Proper Disposal 3 Connecting Electricity 4 Adapter Plugs 4 Installation / .
............ www.truemfg.com ............ True Food Service Equipment, Inc..
............ www.truemfg.com ............ SAFETY INFORMATION True Food Service Equipment, Inc. 1 1 This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used. Do not allow children to climb, stand or hang on the shelves in the refrigerator.
............ www.truemfg.com ............ True Food Service Equipment, Inc. SAFETY INFORMATION 2 2.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 3 3 SAFETY INFORMATION PROPER DISPOSAL OF THE FREEZER / REFRIGERATOR DANGER! RISK OF CHILD ENTRAPMENT USE OF EXTENSION CORDS NEVER USE AN EXTENSION CORD! TRUE will not warranty any refrigerator that has been connected to an extension cord.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 4 4 The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 5 5 INSTALLATION / OPERATION INSTRUCTIONS To insure that your unit works properly from the first day, it must be installed properly. We highly recommend a trained refrigeration mechanic and electrician install your True equipment.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 6 6 INSTALLATION / OPERATION INSTRUCTIONS P A. Set unit in its final location. Be sure there is adequate ventilation in your room. Under extreme heat conditions, (100°F+, 38°C+), you may want to install an exhaust fan.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 7 7 INSTALLATION / OPERATION INSTRUCTIONS Rail End Lower Rail Assembly Snug Fit Here Leveling Shim Castor Leg Bearing Race Lower Rail Assembly Snug Fit Here Rail End Thread castor into the underside of cabinet frame rail.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 8 8 Final Location A. Place styrofoam corners behind cooler for cushion and carefully tilt unit on it’s back. B. Remove the louvered grill by removing four phillips-head screws.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 9 9 INSTALLATION / OPERATION INSTRUCTIONS Wire Gauge for 2% Voltage Drop in Supply Circuits 115 Volt Distance In Feet To Cen.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 10 10 INSTALLATION / OPERATION INSTRUCTIONS A. Before your new unit is connected to a power supply, check the incoming voltage with a voltmeter. If anything less than 100% of the rated voltage for operation is noted, correct immediately.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 11 11 INSTALLATION / OPERATION INSTRUCTIONS A. The compressor is ready to operate. Plug in the cooler. B. Temperature control set at No. 4 position gives refrigerators an approximate temperature of 35°F.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 12 12 SHELVING INSTALLATION / OPERATION & LIGHT SWITCH LOCATION INSTALLATION / OPERATION INSTRUCTIONS SHELF & ORGANIZER INSTALLATION: Step 1 A. Hook shelf clips onto shelf standards.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 13 13 INSTALLATION / OPERATION INSTRUCTIONS FREEZERS DEFROST TIME CLOCK OPERATION (Grasslin Timer) RECOMMENDED DEFROST SETTINGS: True Manufacturing has factory set your defrost time clock to a recommended time and duration defrost scenario.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 14 14 INSTALLATION / OPERATION INSTRUCTIONS IF THE COMPRESSOR WILL NOT RUN 1. If there is no voltage at the compressor terminals, follow the wiring diagram and check back from compressor to the power supply to find where the circuit is interrupted.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 15 15 INSTALLATION / OPERATION INSTRUCTIONS 4. If all operating conditions are normal, the voltage supply at the compressor .
............ www.truemfg.com ............ True Food Service Equipment, Inc. 16 16 INSTALLATION / OPERATION INSTRUCTIONS REQUIRED TOOLS • none STEP 1 Locate rubber gasket behind lamp holder mounted to evaporator housing.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 17 17 MAINTENANCE, CARE & CLEANING REQUIRED TOOLS: • Phillips Screwdriver • Stiff Bristle Brush • Adjustable Wrench • Air Tank or CO 2 Tank • Vacuum Cleaner Step 1 Disconnect power to unit.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 18 18 Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss, and lost sales... which are not covered by warranty.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 19 19 MAINTENANCE, CARE & CLEANING TERMS: Cut-out - Temperature sensed by the controller that shuts the compressor off. Cut-in - Temperature sensed by the controller that turns the compressor on.
............ www.truemfg.com ............ True Food Service Equipment, Inc. 20 20 MAINTENANCE, CARE & CLEANING CAUTION: Do not use any steel wool, abrasive or chlorine based products to clean stainless steel surfaces.
............ www.truemfg.com ............ True Food Service Equipment, Inc. MAINTENANCE, CARE & CLEANING 21 21 WARNING: Disconnect power to cabinet before replacing light bulbs.
............ www.truemfg.com ............ 22 22 WARRANTY INFORMATION (U.S.A & CANADA ONLY!) ONE YEAR PARTS & LABOR WARRANTY TRUE warrants to the original purchaser of every new TRUE refrigerat.
An important point after buying a device True Manufacturing Company T-35 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought True Manufacturing Company T-35 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data True Manufacturing Company T-35 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, True Manufacturing Company T-35 you will learn all the available features of the product, as well as information on its operation. The information that you get True Manufacturing Company T-35 will certainly help you make a decision on the purchase.
If you already are a holder of True Manufacturing Company T-35, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime True Manufacturing Company T-35.
However, one of the most important roles played by the user manual is to help in solving problems with True Manufacturing Company T-35. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device True Manufacturing Company T-35 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
