Instruction/ maintenance manual of the product Electric Fence Security System Tru-Test
Go to page of 17
ENGLISH ..................................................................................................................................... 2 The Energizer Monitor Unit ................................................................................
2 ENGLISH The Energizer Monitor Unit Congratulations on your recent purchase of an Energizer Monitor Unit electric fence security system. The unit is a combined electric fence energizer and alarm system designed primarily for security fencing applications.
3 Which Energizer Monitor Unit do you have? The electric fence security system is based on one of two units, a Premium or a Compact: Premium A Premium unit has just a single ‘power’ indicator lamp on the case front. This unit is typically installed together with a Keypad and/or Keyswitch.
4 Arming and Disarming the Electric Fence Security System Arming the electric fence security system Arm the system when you wish to fully secure the property.
5 Disarming the electric fence security system Disarming using the Keyswitch Disarm the system in the same way as you arm it. 1 Insert the key into the Keyswitch. 2 Rotate ¼ turn to the right until a fast beeping is heard. 3 Return the key back to the upright position and remove.
6 Daytime Fence Monitoring Twenty-four hour fence monitoring can be provided by the unit, even without fully energizing the fence. During the daytime, when people and ch ildren are expected to be around the fenced area, fence monitoring can be provided at a reduced vo ltage, by selecting “Monitor mode”.
7 Exiting Monitor mode using the Keypad To exit Monitor mode and return to Standby, enter the UPIN or OPIN, then press : COMMAND KEY 1 KEY 2 KEY 3 KEY 4 KEY 5 Return to Standby using: User PIN UP I N or Owner PIN OP I N The system will disarm, the Armed lamp will turn off and the Pulse lamp will stop flashing.
8 Alarm Response If the electric fence security system is breached, it triggers an alarm — the security siren and any auxiliary equipment, such as a master alarm system/tele-dialler, are activated. After activation, the cause of the alarm is indicated by the Fence and Gate lamps (on the case front of the Compact, the Keypad, and Keyswitch).
9 Panic Alarm In an emergency, a panic alarm can be raised manually by entering Panic mode. Entering Panic mode Entering Panic mode using the Keypad Enter the key sequence: COMMAND KEY 1 COMMENT Enter.
10 System Operation Indicator lamps You can quickly check the operating status of the electric fence security system by viewing t he LED indicator lamps, fitted to Keyswitch, Keypad and the case front of the Compact unit.
11 Gate Alarm The unit can monitor the gate used to access the area secured by the elect ric fence. If the gate is opened while the system is armed, an alarm will be triggered (subject to the optional exit/entry delays described below). Exit/entry delays The unit can be set with a range of exit/entry dela y times.
12 Setting the User and Owner PIN numbers On Keypad equipped systems, the User PIN (UPIN) or Owner PIN (OPIN) number must be entered before the unit will obey any commands, except when raising a panic alarm. These numbers should be kept secret to prevent unaut horised operation of the unit.
13 Troubleshooting General system faults If you encounter a problem with your electric fenc e security system, first ask your service agent for advice. If the unit detects a fault in the system, it w ill log a fault code, and the Power lamp will start flashing fast.
14 Care and Maintenance While the electric fence security system has been designed to be as maintenance-free as possible, observing the recommendations below will help to ensure a long and trouble-fre.
15 Electric Fence Safety Considerations If you are unsure of the meaning of the safety points detailed below, please seek clarification from your installer before using the system. The following section has been prepared from information appearing in international safety standard IEC 60335-2-76.
16 • Connecting lead s that are run in side buildings shall be effectively in sulated from the earthed stru ctural parts of the building. This ma y be achieved by using insu lated high voltage ca ble.
17 • Ensure that all mains operated, a ncillary equipment con nected to the electric secu rity fence circuit provides a degree of isolation be tween the fence circuit and the s uppl y m ains equivalent to that provided by the energizer.
An important point after buying a device Tru-Test Electric Fence Security System (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tru-Test Electric Fence Security System yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tru-Test Electric Fence Security System - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tru-Test Electric Fence Security System you will learn all the available features of the product, as well as information on its operation. The information that you get Tru-Test Electric Fence Security System will certainly help you make a decision on the purchase.
If you already are a holder of Tru-Test Electric Fence Security System, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tru-Test Electric Fence Security System.
However, one of the most important roles played by the user manual is to help in solving problems with Tru-Test Electric Fence Security System. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tru-Test Electric Fence Security System along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
