Instruction/ maintenance manual of the product BK 8182 Beko
Go to page of 18
Instructions for use GB BK 8182 PLUS.
Safety first/1 Electrical requirements/2 Transportation instructions/2 Installation instructions/2 Getting to know your appliance/3 Suggested arrangement of food in the appliance/3 Temperature control.
1 8 7 6 5 4 3 2 1 16 13 14 12 10 15 9 11 13.
2 3 4.
Instructions for use GB 1 Safety first! Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed. • Leave to stand for at least 4 hours before switching on, to allow compressor oil to settle, if transported horizontally .
Instructions for use GB 2 Electrical requirements Before inserting the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply .
Instructions for use GB 3 2. The freezer compartment is rated and suitable for the freezing and storage of pre-frozen. The recommendation for storage as stated on the food packaging should be observed at all times. 3. Dairy products should be stored in the special compartment provided in the door liner .
Instructions for use GB 4 T emperature control and adjustment Operating temperatures are controlled by the thermostat knob (Fig. 2) and may be set at any position between 1 and 5 (the coldest position). The average temperature inside the fridge should be around +5°C (+41°F).
Instructions for use GB 5 Storing frozen food Y our freezer is suitable for the long-term storage of commercially frozen foods and also can be used to freeze and store fresh food. For storing home-frozen fresh food refer to the storage-life guide on the door-liner .
Instructions for use GB 6 Replacing the interior light bulb Should the light fail, switch off at the socket outlet and pull out the mains plug. Then ensure the bulb is screwed securely in the bulb holder .
Instructions for use GB 7 10. Never: • Clean the appliance with unsuitable material; eg petroleum based products. • Subject it to high temperatures in any way , • Scour , rub etc.
Instructions for use GB 8 T rouble - shooting If the appliance does not operate when switched on, check; • That the plug is inserted properly in the socket and that the power supply is on.
.
1 1585 8.5 1585 1 107 387 min. 550 min. 50 mm min. 200 cm 2 1590 387 min. 50 mm 35.5 35 528 540 min. 5 60 100 100 60 60 - 0 + 2.
2 387 35.5 35 1 107 200 cm 2 200 cm 2 min.50 mm min.50 mm.
3 90 o 2 3 1 4 1.
4 40 -1 mm 5 10 8 7 90 o 18 mm + 1 _ 6 9.
5 2 mm 2 mm 2 mm.
An important point after buying a device Beko BK 8182 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko BK 8182 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko BK 8182 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko BK 8182 you will learn all the available features of the product, as well as information on its operation. The information that you get Beko BK 8182 will certainly help you make a decision on the purchase.
If you already are a holder of Beko BK 8182, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko BK 8182.
However, one of the most important roles played by the user manual is to help in solving problems with Beko BK 8182. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko BK 8182 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
