Instruction/ maintenance manual of the product BK 7641 T Beko
Go to page of 12
BK 7641 T Instructions for use GB.
Safety first/1 Electrical requirements/2 T ransportation instructions/2 Installation instructions/2 Getting to know your appliance/3 Suggested arrangement of food in the appliance/3-4 T emperature con.
1 1 2 3 4 5 6 12 12 9 1 1 8 4 4 7 4 9 10 10.
2 4 3.
Instructions for use 1 Safety first! Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed. • Leave to stand for at least 4 hours before switching on, to allow compressor oil to settle, if transported horizontally .
Instructions for use 2 Electrical requirements Before inserting the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply . • Take care to ensure that the plug remains readily accessible.
Instructions for use 3 Getting to know your appliance (Fig. 1) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Suggested arrangement of food in the appliance Guidelines for obtaining optimum storage and hygiene: 1. The fridge compartment is for the short- term storage of fresh food and drinks.
Instructions for use 4 in tightly closed containers. Never store products that contain an inflammable propellant gas (e.g. cream dispensers, spray cans, etc.) or explosive substances. These are an explosion hazard. T emperature control and adjustment Operating temperatures are controlled by the thermostat knob (Fig.
Instructions for use 5 Storing frozen food Y our freezer is suitable for the long-term storage of commercially frozen foods and also can be used to freeze and store fresh food. For storing home-frozen fresh food refer to the storage-life guide on the door-liner .
Instructions for use 6 basin. Defrost twice a year or when a frost layer of around 7 (1/4") mm has formed. T o start the defrosting procedure, switch off the appliance at the socket outlet and pull out the mains plug. All food should be wrapped in several layers of newspaper and stored in a cool place (e.
Instructions for use 7 • Lift it up. • Clean and wipe it dry • Reassemble, reversing the sequence and operations 13. Excess deposit of ice should be removed regularly with the plastic scraper provided. Large accumulation of ice will impair the performance of the freezer .
Instructions for use 8 T rouble - shooting If the appliance does not operate when switched on, check; • That the plug is inserted properly in the socket and that the power supply is on.
An important point after buying a device Beko BK 7641 T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko BK 7641 T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko BK 7641 T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko BK 7641 T you will learn all the available features of the product, as well as information on its operation. The information that you get Beko BK 7641 T will certainly help you make a decision on the purchase.
If you already are a holder of Beko BK 7641 T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko BK 7641 T.
However, one of the most important roles played by the user manual is to help in solving problems with Beko BK 7641 T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko BK 7641 T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
