Instruction/ maintenance manual of the product AB920 Beko
Go to page of 18
BEKO plc Beko House Caxton W ay W atford Hertfordshire WD18 8UF T el: 01923 654650 Fax: 01923 819653 e-mail: ser vice@beko.co.uk website: www .beko.co.
1 Congratulations on your choice of a quality Appliance which has been designed to give you ser vice for many years. W ARNING ! IMPORT ANT ! DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed.
ELECTRICAL REQUIREMENTS Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply . Rating label is on the left hand side of fridge inner liner .
5. Door height adjustment If there is a misalignment between the doors, perfor m the steps indicated below to adjust door heights: Doors can be raised vertically . This process can be per formed easily using a cross section screwdriver and an allen key as illustrated in the following figures.
• Loosen the 3 screws of the lower door hinges using a screwdriver . (Do not remove completely) • If the freezer compartment door is higher than the fridge compar tment door , bring them to the sa.
9 STORING PRE-FROZEN FOOD - See also page 22 • T ake special care not to mix with fresh food. • The recommendation for storage as stated on the food packaging must always be followed. • Pre-packed frozen food should be stored in accordance with the food manufacturer’ s instructions for a frozen food storage compartment.
AB910 WITHOUT STORED W A TER DISPENSER GETTING TO KNOW YOUR FROST FREE FRIDGE / FREEZER 10 11 GETTING TO KNOW YOUR FROST FREE FRIDGE / FREEZER Freezer Compartment Fridge Compartment Double twist &.
USING THE ACCESSORIES Supplied with AS920 Model only . Chiller Compar tment Crisper or Chiller (0°C i. e. zero degree centigrade compartment (1) • The drawer at the bottom of the fridge compartment can be conver ted into a salad crisper or a Chiller Compartment.
Humidity level control in the crisper Humidity level can be adjusted by sliding the humidity adjustment slider to the right or left. • If you want to maintain humidity in this compartment, set the humidity adjustment slider to the closed position.
16 17 Cleaning the water tank Remove the water tank, open the latches on both sides and detach the top cover mechanism from the water tank. Clean the water tank with warm clean water , reinstall the top cover mechanism and fasten the latches. When installing the water tank, make sure that hooks behind it fits securely into the hangers on the door .
SUGGESTED ARRANGEMENT OF FOOD IN THE FRIDGE/FREEZER Arrangement Examples (See diagram) 1. Baked, chilled cooked food. 2. Wine and similar items can be stored. 3. Meat, sausages, cold cuts - Y ou may also use Chiller Compar tment (4-b) to store these items 4.
TEMPERA TURE CONTROL AND ADJUSTMENT Setting the fridge compar tment temperature When you want to change your fridge temperature setting, press the “Fridge compar tment temperature adjustment button” . The fridge compartment temperature can be set to cooler degrees ever y time you press the button (such as 8, 6, 4, 2, 8, …).
STORING FROZEN FOOD Prepacked commercially frozen food should be stored in accordance with the frozen food manufacturer's instructions for a frozen food storage compartment. T o ensure that the high quality achieved by the frozen food manufacturer and the food retailer is maintained, the following should be remembered: 1.
Model AS920 is shown for illustration purposes. REPLACING THE INTERIOR LIGHT BULB Should the light fail to work, proceed as follows. 1. Switch off at the socket outlet and pull out the mains plug. • Remove all shelves and drawers for easy access. 2.
ENERGY SA VING TIPS 1- Ensure your appliance is installed in a well ventilated area. If the ambient temperature is low (but in no case lower than 5 degrees C), then the energy saving will be more. 2- Ensure the time between buying chilled/frozen food and placing them in your appliance is kept at minimum, particularly in summer .
29 28 Complaint Possible Reason Solution Having very low temperatures Freezer temperature is very low while the fridge temperature is sufficient. Fridge temperature is very low while the freezer temperature is sufficient. Food kept in the drawers freeze.
30 31 GUARANTEE DET AILS Y our new Beko product is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • Repairs necessar y as a result of faulty materials, defective components or manufacturing defect.
32 HOW TO OBT AIN SERVICE Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention under guarantee. Y ou should also complete the details below; it will help us assist you when requesting ser vice.
An important point after buying a device Beko AB920 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko AB920 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko AB920 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko AB920 you will learn all the available features of the product, as well as information on its operation. The information that you get Beko AB920 will certainly help you make a decision on the purchase.
If you already are a holder of Beko AB920, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko AB920.
However, one of the most important roles played by the user manual is to help in solving problems with Beko AB920. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko AB920 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
