Instruction/ maintenance manual of the product MT-6 Tripp Lite
Go to page of 8
T ouchMaster ™ (MT -6) T ouchMaster PLUS ™ (MT 6PLUS) Command Console ® (CCI 6) Command Console PLUS ® (CCI6PLUS) Command Console ® Compact (CCC4) P ower Center (PC 5) Under-Monitor Surge Suppressors Owner’ s Man ual 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 • www .
2 Intr oduction CONNECTING Y OUR UNDER-MONIT OR SURGE SUPPRESSOR Connection to A C Po wer Line (all models) The Under-Monitor Surge Suppr essor power cord should onl y be connected to a standard 3-wire grounded 120-V olt A C, 60-Hz outlet.
3 Connecting Y our Equipment (See Fr ont and Rear P anel illustr ations on page 5 f or connection to your specif ic model.) After you hav e properly connected y our Under-Monitor Surge Suppr essor to the A C line and telephone line (if applicable), you can connect the AC po wer cords of y our equip- ment to the surge suppr essor .
4 Features Circuit Breaker (all models) If the current draw of the equipment connected to the surg e suppressor exceeds 15 amps for long er than a few seconds, the circuit br eaker will open (trip) to prevent any possib le damage. When the circuit breaker trips, the plunger will be e xtended.
5 Fr ont P anels 1 2 6 3 5 4 FR ONT P ANEL FEA TURES Switches 1) Individual 2) Master Indicator Lights 3) Protection Present 4) Line F ault 5) Line “OK” 6) Low V oltage T ouchMaster T ouchMaster P.
6 Battery Selection • • LINE "OK" (Green Indicator Light) (all models e xcept Power Center) Indicates 120V A C power is present with no wiring faults detected.
7 Specifications No. of AC Line Cord* No. of Control AC Energy Surge Transient Ultimate AC Receptacles Length Switches Absorption Suppression Response Dimensions Lifetime Model (NEMA 5-15R) (ft.) Master/Aux. (joules) (amp spikes)** T ime (H x W x D, in.
8 W arranty LIFETIME LIMITED W ARRANTY V ALID FOR ALL MODELS EXCEPT POWER CENTER (PC5) WHICH HAS A 5-YEAR W ARRANTY Seller warrants this product, if used in accordance with all applicab le instructions, to be free from original defects in material and workmanship for its lif etime.
An important point after buying a device Tripp Lite MT-6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite MT-6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite MT-6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite MT-6 you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite MT-6 will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite MT-6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite MT-6.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite MT-6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite MT-6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
