Instruction/ maintenance manual of the product DWT1323S Tripp Lite
Go to page of 8
1 Owner ’s Manual W ARRANTY REGISTRATION Register online today for a chance to win a FREE T ripp Lite product! www .tripplite.com/warranty T ilt Flat Screen W all Mount MODEL: DWT1323S CAUTION: DO NOT EX CEED MAXIMUM LISTED WEIGHT CAP ACITY . SERIOUS INJURY OR PROPERTY DAMAGE MA Y OCCUR! 1111 W .
2 NOTE: Read the entire instruction manual before you start installation and assembly . W arranty & W arranty Registration W ARNING • Do not begin the installation until you have read and understood the instructions and warnings contained in this manual.
3 Component Checklist DWT1323S M4X14 (x4) Anchor Bolt (x2) Concrete Anchor (x2) M5X14 (x4) D5 washer (x4) P ackage M P ackage W IMPORTANT : Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or faulty , visit www .
4 1.Disassemble VESA Plate 2a. Mount on W ood Stud W all 1 3 Find and mark the exact location of mounting holes Screw the wall mount onto the wall Drill pilot holes W ARNING • Make sure that mounting screws are anchored into the center of the studs.
5 2b. Mount on Solid Brick and Concrete Block Mark the exact location of mounting holes Screw the wall mount onto the wall Drill pilot holes W ARNING • When installing wall mounts on cinder block, verify the actual concrete thickness is at least 1-3/8” (35mm) for using the concrete anchors.
6 3. Install the W all Plate (For clarit , outer cover is not shown.) Anchor Bolt Align top hole of wall plate to screw in wall and lower the wall plate until the screw is seated in upper area of tear -drop mounting hole. Install the other screw and level the wall plate, then tighten all screws securely .
7 Tighten all screws but do not over tighten. 4. Install the VESA Plate T op of display D5 Washer Screw VESA plate onto the display . D5 Washer M4X14 M5X14 M4X14 M5X14 or TV TV TV 13-09-229-93-32A5-EN.
8 1111 W . 35th Street, Chicago, IL 60609 USA • www .tripplite.com/support 5. Hang the display onto the W all Plate 6. Adjustment Push or pull from the top or bottom of display to obtain a desired angle. Hook the VESA plate (attached the display) onto the wall plate and tighten the screw to secure it.
An important point after buying a device Tripp Lite DWT1323S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite DWT1323S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite DWT1323S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite DWT1323S you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite DWT1323S will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite DWT1323S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite DWT1323S.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite DWT1323S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite DWT1323S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
