Instruction/ maintenance manual of the product B030-002-R Tripp Lite
Go to page of 17
User’ s Manual 2-P ort KVM Switch with Built-In Cables (PS/2 T ype) Model #: B030-002-R NOTE: Follow these installation and operating procedures to ensure correct performance and to prevent damage to this unit or to its connected devices. Copyright © 2004 T ripp Lite.
• A PS/2 style keyboard • A PS/2 style mouse Computers The following equipment must be installed on each computer that is to be connected to the system: • A VGA, SVGA, or Multisync port • A PS/2 style keyboard port (or USB*) • A PS/2 style mouse port (or USB*) * When used with optional B015-000 PS/2-to-USB adapter .
When Connecting a USB Computer 1. Connect a USB-to-PS/2 adapter (T ripp Lite Model: B015-000) to the USB port on your computer . This will convert the single USB port into a PS/2 keyboard port and PS/2 mouse port. 2. Follow the instructions on the opposite page for “When Connecting a PS/2 Computer .
T r oubleshooting If you are experiencing problems, first make sure that there are no cable problems. Check all cable connections. 7 2. Auto Scan Mode: Auto Scan** automatically switches between PCs at regular 10 second intervals. T o invoke the Auto Scan Mode, press and release the [Scroll Lock] key twice, then press and release the [0] key .
FCC Radio / TV Interfer ence Notice Note: This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to P art 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion.
11 10 Manual del usuario Multiplexor KVM de 2 puertos con cables integrados (tipo PS/2) Nº de modelo: Serie B030-002-R NOT A: Siga estos procedimientos de instalación y operación para asegurarse un correcto rendimiento y para evitar que se dañe esta unidad o los dispositivos que se conecten a ella.
1 2 3 4 5 13 12 Requisitos del sistema Consola • Un monitor VGA, SVGA, o Multisync, con la resolución más alta que usará en cualquiera de los monitores de la instalación • Un teclado PS/2 • .
Opción 2) Seleccione una PC específica presionando y liberando la tecla [Bloq Despl] dos veces, y luego presionando la tecla [1] * para conectar al puerto 1 o la tecla [2] * para conectar al puerto 2. * Nota: Para conectarse a los puertos, debe usar las teclas de números ubicadas encima de las teclas de letras en el teclado.
17 16 Problema Causa Solución El teclado no Es necesario Desconecte el teclado del responde* restablecer el teclado multiple xor y luego vuelva. a enchufarlo Es necesario restablec er Apague las computadoras. el multiple xor Espere 5 segundos y vuelva a encenderlas.
18 19 Problema Causa Solución Apéndice Problemas de video La resolución o el ancho de banda son demasiado altos El multiple xor admite monitores V GA, SVGA, Multisync y XGA (entrelazado) con una resolución de hasta 2048 x 1536 Hz.
21 20 TRIPP LITE SERÁ RESPONSABLE DE DAÑOS DIRECT OS, INDIRECT OS, ESPECIALES, INCIDENT ALES O CONSECUENTES QUE SEAN RESUL T ADO DEL USO DE ESTE PRODUCT O, SIN IMPORT AR QUE SE LE HA Y A AD VER TIDO SOBRE LA POSIBILIDAD DE DICHOS D AÑOS.
23 Configuration du système Console • Un écran VGA, SVGA ou Multisync ayant la capacité d'être réglé à la résolution la plus élevée que vous utiliserez sur n'importe quel ordinat.
1 2 3 4 5 25 24 Composants 1 Port Clavier Console (PS/2: MiniDIN6, Femelle) 2 Port Écran VGA Console (HD-15, Femelle) 3 Port Souris Console (PS/2: MiniDIN6, Femelle) 4 Témoins DEL d'état : Un témoin allumé en permanence identifie quel est le PC sélectionné.
27 Fonctionnement Sélection du port Raccouci-clavier La navigation à l'aide des touches rapides vous permet de sélectionner le PC actif ou de démarrer la procédure d'auto-balayagep directement à partir du clavier .
29 28 Problème Cause Solution Le clavier ne Le clavier doit Ebranchez d'abord le répond pas* être réinitialisé D clavier du commutateur , puis branchez-le de nouveau. Le commutateur doit Éteignez les micro- être réinitialisé ordinateurs.
31 30 Problème Cause Solution Annexe Problèmes vidéo La résolution ou la bande passante sont configurées à un niveau trop éle vé Le commutateur s'adapte aux moniteurs V GA, SVGA, Multisync et XGA (entrelacé) possédant une résolution maximale de 2048 x 1536.
32 200312045 93-2213 GARANTIE LIMITÉE DE 3 ANS TRIPP LITE garantit que ses produits sont ex empts de tout défaut matériel et de vice de fabrication pendant une période de trois (3) ans à partir de la date d'achat initiale.
An important point after buying a device Tripp Lite B030-002-R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tripp Lite B030-002-R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite B030-002-R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite B030-002-R you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite B030-002-R will certainly help you make a decision on the purchase.
If you already are a holder of Tripp Lite B030-002-R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite B030-002-R.
However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite B030-002-R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite B030-002-R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
