Page doesn't exist.

Tripp Lite B020-U08-19-K manual

Instruction/ maintenance manual of the product B020-U08-19-K Tripp Lite

File size: 1.72 mb
Number of pages: 22

Download as PDF

Go to page of 22

Summary of contents each page of manual

Page 1

This packa ge should consist of: 1111 W . 35th Street, Chicago, IL 60609 USA www .tripplite.com/suppor t NetDirector Console KVM Switch (8- or 16-P ort) or Rac kmount KVM Switch (16-P ort) Models: B02.
Page 2

1. Features 3 2. System Requirements 3 2.1 Computer 3 2.2 Console 3 2.3 Cables 3 3. Introduction 4 3.1 Front View of Console KVM Switch 4 3.2 Rear View of Console KVM Switch 5 3.3 Front View of B022-U16 5 3.4 Rear View for B022-016 6 4. Installation 6 4.
Page 3

1. Features • IntegratedKVM consolewith 19” LCDfor theB020-U08-19-K, B020-U08-19KT AAand B020-U16-19-K. • B020-U08-19-K,B020-U08-19KT AA andB020-U16-19-K come with(8) P778-SeriesUSB/PS2 Combo KVMCable Kits.
Page 4

1 . Handle Pullto slide theKVM module out;push toslide the modulein (see item13 in thistable). 2 . LCD Display Aftersliding the KVMmodule out, flipup thecoverto access the LCDmonitor .
Page 5

1 . P or t Push-Buttons/LEDs Thereare 16 portselection push-buttonsonthe frontpanel, all ofwhich containan LED. • Pressthe push-buttonof anyport toswitch the KVM’ s focusto that  port.
Page 6

3.4 Rear View of B022-U16 4.1 Pre-Installation Safety Instructions 1 . Daisy-Chain P or t • Daisy-Chain In Port –Whendaisy-chaining additional KVM switches,the daisy-chain cablefrom the pre vious KVMswitch inthe chainconnects here.
Page 7

• Ifthe followingconditions occur ,unplug the de vice fromthe walloutlet andbring it toqualifiedservice personnel forrepair:  • Thepowercord or plughas become damagedor frayed.
Page 8

Fastenthe rackmountbrackets tothe rack usinguser-suppliedscrewsto install ina rack. T opreventdamage toyour installation itis importantthat all de vices areproperly grounded.
Page 9

AllKVM switches supporthot plugging—components canbe remov ed andadded back intothe installationby unplugging theircables from theports withouthaving toshut theswitch down.
Page 10

5.3 LCD OSD (On-Screen Display) Configuration 5.4 Sharing USB P eripheral Devices 5.5 P owering Off and Restarting 5. Basic Operation The LCD OSD allows y ou to set up and configure the LCD display: • T oopen up theLCD OSD mainmenu, pressthe buttonmarked Menu.
Page 11

6. Hotkeys NetDirectorKVMSwitchescanbeeasilyoperatedusinghotkeycommands. Thischapterdiscussestheav ailablehotke ysandtheirfunctions.
Page 12

6. Hotkeys 6.4 A uto Scanning 6.5 Starting Auto Scan 6.6 P ausing in Auto Scan 6.7 Skip Mode 6.8 Hotkey Beeper Contr ol 6.9 Computer Ke yboard/Mouse Reset AutoScanallowstheconnectedcomputerstobemonitoredautomatically ,withouthavingtomanuallytogglebetweenports.
Page 13

6. Hotkeys 6.10 Quick Hotke y Control 6.11 OSD Hotkey Contr ol 6.12 P ort OS Control 6.13 Restore Default V alues 6.14 Hotkey Summary T able Thehotkeysequencetoin vokeHotke yModecanbetoggledviahotkeycommandaswellasOSD.
Page 14

• T oclose the menuand deactiv ateOSD, click the [X] atthe upper rightcorner of theOSDW indow;or press [Esc].
Page 15

7. OSD (On-Screen Display) Operation 7.6 OSD Functions OSDfunctionsallowtheKVMtobecontrolledandconguredviatheOSD.
Page 16

Setting Function SCAN/SKIPMODE Selectwhichportswillbeaccessedduring AutoScanandSkipModes.Choicesare: • ALL – Allaccessibleportsintheinstallationwillbeaccessiblein AutoScanandSkipModes.
Page 17

Setting Function RESTOREDEF A UL T V ALUES Thisallowsthe AdministratortorestoreallOSDsettingstotheirfactorydefaultv aluesexceptfortheportnamesanduser - name/passwords.
Page 18

F6 Broadcast Mode (BRC) F6is anAdministrator -ONL Y function.Clicking the F6 field,or pressing [F6] ,inv okesBroadcast (BRC) Mode.Whenthis function isin effect,commands sentfrom the consoleare broadcast toall av ailablecomputers on the installation.
Page 19

T oupgrade your firmw are: 1. Run the do wnloaded FirmwareUpgrade Utilityby double-clicking the fileicon orby openinga command lineand entering thefull pathto it. TheFirmware UpgradeUtility W elcome screen appears.
Page 20

8. Firmware Upgrade Utility 9. Appendix A Afirmwareupgrade recoveryisrequired in anyof thefollowingsituations: • Whenyou in vokeFirmwareUpgrade Mode (seepage 18),but decidenot toproceed with theupgrade.
Page 21

Thefactory defaultsettings areas follows: Setting Default OSDHotkey [Scroll Lock] [Scr oll Lock] * PortID Display Position UpperLeft Corner PortID Display .
Page 22

FCC Notice, Class A This device complies with part 15 of the FCC Rules. Operation is subject to the follo wing two conditions: (1) This devi.

Read the Tripp Lite B020-U08-19-K manual - avoid problems

An important point after buying a device Tripp Lite B020-U08-19-K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:

to know how to properly use the device
to know how to perform maintenance/ periodic checks of correct operation of the product Tripp Lite B020-U08-19-K
to know what to do in case of failure Tripp Lite B020-U08-19-K

If you have not bought Tripp Lite B020-U08-19-K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tripp Lite B020-U08-19-K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tripp Lite B020-U08-19-K you will learn all the available features of the product, as well as information on its operation. The information that you get Tripp Lite B020-U08-19-K will certainly help you make a decision on the purchase.

If you already are a holder of Tripp Lite B020-U08-19-K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tripp Lite B020-U08-19-K.

However, one of the most important roles played by the user manual is to help in solving problems with Tripp Lite B020-U08-19-K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tripp Lite B020-U08-19-K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center

Other manuals from the category Switch