Instruction/ maintenance manual of the product U-Control UMX25 Behringer
Go to page of 15
U-CONTROL UMX25 Version 1.1 August 2006 User’s Manual.
2 U-CONTROL UMX25 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure—voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 U-CONTROL UMX25 UMX25 U-CONTROL The Ultimate Studio in a Box: 25-Key USB/MIDI Controller Keyboard with USB/Audio Interface, 50 Software Instruments and Ableton ® Live Lite 4 BEHRINGER Edition V Unleash your creativity and play 50 virtual instruments and synthesizers, take off with an unlimited number of sound creations.
4 U-CONTROL UMX25 TABLE OF CONTENTS 1. INTRODUCTION ......................................................... 5 1.1 Before you get started ................................................... 5 1.1.1 Shipment ...........................................
5 U-CONTROL UMX25 1. INTRODUCTION Thank you for showing your confidence in BEHRINGER products by purchasing the UMX25. The UMX25 is an extremely flexible master keyboard with a controller unit that can be used for a wide array of applications.
6 U-CONTROL UMX25 V Remotely controlling software mixers (volume, panorama, mute functions, etc.) V Remotely controlling transport functions (playback, forward, stop, etc.
7 U-CONTROL UMX25 3. CONTROL ELEMENTS AND CONNECTIONS What settings do I have to make? Where? How? Basically, which control element generates which controller must be set on the UMX25, and how incoming controller commands should be interpreted must be set on the receiving device.
8 U-CONTROL UMX25 4. OPERATION The eight buttons B1 – B8 generate switch controllers. Again, these are factory-set functions (see table on the device). Like the rotary controls the buttons can be freely assigned to any controller in ASSIGN mode. The table shows the controller assignment preset at the factory.
9 U-CONTROL UMX25 4. OPERATION 4.1.2 The USER MEMORY Settings that are stored in the USER MEMORY, are stored permanently in the internal flash ROM and will be retained even after switching the unit off.
10 U-CONTROL UMX25 4. OPERATION 4.2.5 The SNAPSHOT SEND command The SNAPSHOT command transmits all parameters including their current values: all control element assignments as well as the current channel settings are sent out from the MIDI OUT connector and the USB output of the UMX25.
11 U-CONTROL UMX25 4. OPERATION different banks. Considering the fact that each single bank includes another 128 single programs, you get the unbelievably large number of 2,097,152 programs for you to organize. 1 ) Press the ASSIGN button and keep it pressed .
12 U-CONTROL UMX25 4) Confirm your selection with . To discard your assignments either press the button or the ASSIGN button again. Pressing the right-hand OCTAVE SHIFT button switches the presets up by one number on the external sound module, pressing the left-hand OCTAVE SHIFT button switches the presets down by one number.
13 U-CONTROL UMX25 5. SPECIFICATIONS BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
14 U-CONTROL UMX25 6. APPENDIX T ab. 6.1: MIDI-Controller overview 6. APPENDIX.
15 U-CONTROL UMX25 7. WARRANTY 7. WARRANTY § 1 OTHER WARRANTY RIGHTS AND NATIONAL LAW 1. This warranty does not exclude or limit the buyer’s statutory rights provided by national law, in particular, any such rights against the seller that arise from a legally effective purchase contract.
An important point after buying a device Behringer U-Control UMX25 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer U-Control UMX25 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer U-Control UMX25 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer U-Control UMX25 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer U-Control UMX25 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer U-Control UMX25, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer U-Control UMX25.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer U-Control UMX25. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer U-Control UMX25 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
