Instruction/ maintenance manual of the product PROMIXERVMX300 Behringer
Go to page of 12
Version 1.0 September 2001 Users Manual ENGLISH www.behringer.com PRO MIXER VMX300.
2 PRO MIXER VMX300 This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Read the manual. SAFETY INSTRUCTIONS CAUTION: T o reduce the risk of electric shock, do not remove the cover (or back).
3 PRO MIXER VMX300 FOREWORD Dear Customer, Welcome to the team of PRO MIXER users and thank you for demonstrating your faith in us by purchasing the BEHRINGER VMX300.
4 PRO MIXER VMX300 VMX300 PRO MIXER Professional 3-channel ultra low-noise DJ mixer s Intelligent dual auto-BPM counter with time and beat sync display s Super-smooth Ultraglide faders with up to 500,.
5 PRO MIXER VMX300 1. INTRODUCTION TABLE OF CONTENTS 1 . INTRODUCTION ..................................................................................................................... 5 1. 1 Before you get started .................................
6 PRO MIXER VMX300 2. FRONT PANEL 2 . FRONT PANEL.
7 PRO MIXER VMX300 2. FRONT PANEL 2.1 Input channels 1 The MIC/PHONO-LINE switch allows you to select the input signal, choosing between microphone and line/phono. Whether the right-hand position selects the line or mic input depends on the position of the PHONO/LINE switch on the rear panel (see ).
8 PRO MIXER VMX300 2. FRONT PANEL 15 It the PFL MODE switch is set to SPLIT, the channels are strictly separated: channel 1 will be heard on the left side, channel 2 on the right.
9 PRO MIXER VMX300 3. REAR PANEL + We strongly recommend the use of high-grade cables and connectors for the transmission of audio signals. Inferior quality materials cannot supply acceptable audio quality or corrosion protection. 27 The PHONES OUT socket allows you to connect your headphones for pre-listening (PFL signal).
10 PRO MIXER VMX300 3. REAR PANEL 35 Use the AMP output to connect the VMX300 to an amplifier. The level is controlled by the OUT A control in the MAIN OUT section. 36 The BOOTH output offers a connection for an additional amplifier and/or loudspeaker system.
11 PRO MIXER VMX300 4. SPECIFICATIONS 4. SPECIFICATIONS AUDIO INPUTS Mic input 46 dB gain, servo-balanced Phono inputs 1, 2 and 3 40 dB gain @ 1 kHz, unbalanced Line inputs 1, 2 and 3 0 dB gain, unbalanced Return 0 d B g a in , unbalanced AUDIO OUTPUTS Main Out max.
12 PRO MIXER VMX300 5. WARRANTY The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, elect.
An important point after buying a device Behringer PROMIXERVMX300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer PROMIXERVMX300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer PROMIXERVMX300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer PROMIXERVMX300 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer PROMIXERVMX300 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer PROMIXERVMX300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer PROMIXERVMX300.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer PROMIXERVMX300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer PROMIXERVMX300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
