Instruction/ maintenance manual of the product PMX1000 Behringer
Go to page of 14
Version 1.0 December 2003 Users Manual ENGLISH EUROPOWER PMX1000/P M X 3000/P M X 5000.
2 EUROPOWER PMX1000/PMX3000/PMX5000 This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosurevoltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature.
3 EUROPOWER PMX1000/PMX3000/PMX5000 FOREWORD Dear Customer, Welcome to the team of EUROPOWER users and thank you very much for expressing your confi- dence in BEHRINGER products by purchasing t his power mixer.
4 EUROPOWER PMX1000/PMX3000/PMX5000 1. INTRODUCTION Congratulations! With the PMX1000/PMX3000/PMX5000 you have acquired a state-of-the-art power mixer that sets new standards. Right from the very start it has been our goal to design a revolutionary unit that can be used for a wide variety of applications.
5 EUROPOWER PMX1000/PMX3000/PMX5000 2. CONTROL ELEMENTS The FX control determines the signal level sent from each channel to the built-in effects processor; this signal is also present at the FX SEND jack (see ). The PMX5000 has two FX controls ( FX 1 and FX 2 ), so that you can use two effects simultaneously.
6 EUROPOWER PMX1000/PMX3000/PMX5000 2. CONTROL ELEMENTS considerably higher than the power provided to the speakers wired to the parallel speaker outputs.
7 EUROPOWER PMX1000/PMX3000/PMX5000 3. DIGITAL EFFECTS PROCESSOR PMX5000: The SUB FILTER filters out frequencies above the selected setting, so that only low frequencies are sent to an (active) subwoofer via the MONO OUT ). Set this switch to On to activate the filter.
8 EUROPOWER PMX1000/PMX3000/PMX5000 4. INSTALLATION AMBIENCE : Reproduces a middle-sized room without late reflections. EARLY REFLECTIONS : The initial reflections of this room are clearly audible. This effect is a classic for dynamic signals (drums, percussion, slap bass, etc.
9 EUROPOWER PMX1000/PMX3000/PMX5000 4. INSTALLATION Fig. 4.2: 1/4" TRS connector Fig. 4.3: XLR connectors Fig. 4.4: 1/4" mono plug for footswitch 4.3 Loudspeaker connections Your power mixer is equipped with high-quality Neutrik NL4MP SPEAKON ® connectors, which ensure safe and trouble-free operation.
10 EUROPOWER PMX1000/PMX3000/PMX5000 5. WIRING EXAMPLES 5. WIRING EXAMPLES Fig. 5.1: Stereo operation For stereo operation the POWER AMP switch must be set to its upper position (MAIN or MAIN L/MAIN R). Outputs A and B provide the stereo main signal for passive speakers.
11 EUROPOWER PMX1000/PMX3000/PMX5000 Fig. 5.3: Dual mono operation For a dual mono operation, the AMP MODE switch must be set to its center position (MON1/MONO for PMX3000/PMX5000 or MON for PMX1000)! The two SPEAKON ® outputs provide the main and the monitor signals, separately from each another.
12 EUROPOWER PMX1000/PMX3000/PMX5000 5. WIRING EXAMPLES Fig. 5.5: Expanded set-up This application is an expanded set-up based on the standard set-up as shown in fig. 5.4, and provides additional connection options. Again, this is just an example, which can be expanded in various ways.
13 EUROPOWER PMX1000/PMX3000/PMX5000 6. SPECIFICATIONS 6. SPECIFICATIONS BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice.
14 EUROPOWER PMX1000/PMX3000/PMX5000 7. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3.
An important point after buying a device Behringer PMX1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Behringer PMX1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Behringer PMX1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Behringer PMX1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Behringer PMX1000 will certainly help you make a decision on the purchase.
If you already are a holder of Behringer PMX1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Behringer PMX1000.
However, one of the most important roles played by the user manual is to help in solving problems with Behringer PMX1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Behringer PMX1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
