Instruction/ maintenance manual of the product TK400K TRENDnet
Go to page of 9
Copyright ©2005. All Rights Reserved. TRENDware International, Inc. T R E N D n e t TRENDware, USA What's Next in Networking TK-200K/TK-400K V er sion 07.
T able of Contents English ...................................................................................................... 1 1 2 3 4 1. Prepare for Installation ...................................................................... 2. Introduction .
Thank you for purchasing TRENDnet's TK-200K/TK-400K KVM Switch Kit. This guide will help you set up your KVM switch. Following the installation instructions should be quick and easy . If you run into problems, please refer to the T roubleshooting section.
2 2. Introduction The TK-200K/TK-400K is a PS/2 KVM Switch Kit that allows you to control 2 or 4 computers, respectively , using a single monitor , PS/2 keyboard, and PS/2 mouse. By using this KVM Switch, you'll cut hardware costs, save valuable space, and reduce energy consumption.
3 3. Installa tion 1. T urn off both computers and their peripherals, and disconnect all power cords. 2. Connect the shared keyboard, monitor , mouse to their respective ports on the KVM switch. The KVM Switch's inputs are color-coded for your convenience.
4 T o switch between computers, you use the front-panel push buttons or hot-key commands. Hot-Key Commands A keyboard hot-key command consists of three keystrokes: Hot-Key command = ScrLk + ScrLk + Command key(s) After pressing the ScrLk key , you have 2 seconds to press the ScrLk key again.
Port Selection: Push Button and Hot-Key Commands Auto-Scan Intervals: 10 seconds Power T ype: PS/2 Interface Power . Optional 5V~9V DC, 500mA~1A Adapter 5 Specifica tions Computer Connections: 2 (TK-200K) or 4 (TK-400K) KVM Cable: TK-200K: 2 sets of integrated 1.
6 T r oubleshooting Q1: A1: Q2: A2: Q3: A3: Q4: A4: Where is the power supply? I did not find one in the box. The TK-200K/TK-400K does not require a power supply . It draws power from the PS/2 connection of your computers. As long as you are connected to the PS/2 port, your KVM switch will function.
Copyright ©2005. All Rights Reserved. TRENDware International, Inc. @ T R E N D n e t TRENDware, USA What's Next in Networking P r o d uc t Wa r r a n t y Re g i s t r a t i o n Please take a moment to register your product online. Go to TRENDware’s website at http://www.
An important point after buying a device TRENDnet TK400K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TK400K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TK400K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TK400K you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TK400K will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TK400K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TK400K.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TK400K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TK400K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
