Instruction/ maintenance manual of the product TEW-739APBO TRENDnet
Go to page of 18
Ÿ N300 Outdoor PoE Access Point TEW-739APBO TEW -7 39APB O (V1) /06. 1 9.20 1 4 Ÿ Quick Installation Guide (1).
Ÿ TEW-739APBO Ÿ CD-ROM (User's Guide) Ÿ Multi-Language Quick Installation Guide Ÿ Proprietary PoE injector Ÿ Power adapter (48 V DC, 0.5 A) Ÿ Mounting hardware Ÿ W aterproof RJ-45 plug (network cable is not included) Ÿ Grounding wire Package Contents 1.
2 2. Hardware Configuration Note: The default IP address of the TEW-739APBO is 192.168.10.100. T o configure the TEW-739APBO, your network adapter must have an IP address within the 192.168.10.x subnet (e.g. 192.168.10.50). Please refer to the Appendix in the User's Guide for more information.
3 5. Connect the other end of a network cable to your computer's Ethernet port. 6. Connect the power adapter into the Power over Ethernet Injector . Then connect the power adapter into a power outlet. (For EU version, toggle the power switch to the “On” position).
4 9. Enter the User name and Password , and then click OK . By default: User Name: admin Password: admin Note: Username and password are case sensitive. Note: For first time installation, you are required to change the admin password. 10. Enter a new admin password.
Note : T o protect your network from any unauthorized access it is recommended to enable wireless encryption. 5 16. Select WP A2-PSK for security type.
6 22. Wait 45 seconds while the Access Point reboots. 21. Click Reboot . 20. Click Reboot . 23. Configure the TEW -739APBO's IP address to a valid IP address within the subnet defined by the Router . Avoid using an IP address within the DHCP pool of your router .
7 24. Click System " LAN . 25. Select Static IP . 26. Configure the IP Address, IP Netmask and IP Gateway based on the example in step 23. 27. Select Specify DNS Server IP . 28. Configure the Primary DNS based on the example in step 23. 29. Click Save .
8 31. Click Reboot . 32. W ait 45 seconds while the Access Point reboots..
9 3. Hardware Installation W aterproof kit installation 1. Unscrew the sealing nut from the main body . 2. Separate the rubber seal from the claw . Cable Gland Seal Claw Sealing Nut 3. V erify that you have the following parts: Cable Gland, Seal, Claw , Sealing Nut 4.
10 Access point installation Building Modem Internet Router TEW-739APBO.
1. Refer to the above diagram. 2. Mount the TEW-739APBOs in your desired location. Instructions for pole mounting the access point can be found in the section. 3. V erify that the status LED indicators on both TEW-739APBOs are fully functional: PWR [Power](Green / Solid), LAN (Blinking / Green), Wireless Signal Strength (Blinking / Green) .
12 Pole mounting the TEW-739APBO Note: The pole mounting clamp supports poles with a maximum diameter of 78 mm (3.07 inches). 1. Align the mounting bracket with the holes on the the unit and secure it with the screws and washers provided. 2. Slide the two provided pole mounting clamps around the pole.
Company Inf ormation: Company Name: Company Address: Product Informa tion: Product Description: N300 Outdoor PoE Access P oint Model Number: Brand Name: T echnical Standards: Declaration: I hereby declare that the products and devices mentioned above are consis tent with the standards and provisions of the guidelines.
GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT W ARRANTY and are subject to the copyrights of the developers.
Общая информация о лицензиях GPL/LGPL В состав данного продукта TRENDnet входит бесплатное программное обеспечение, написанное сторонними разработчиками.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following length of time from the date of purchase. Warranty: 3 year limited warranty (When Applicable: 1 year warranty for power adapter , power supply , and cooling fan components.
Certifications This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
An important point after buying a device TRENDnet TEW-739APBO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TEW-739APBO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TEW-739APBO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TEW-739APBO you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TEW-739APBO will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TEW-739APBO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TEW-739APBO.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TEW-739APBO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TEW-739APBO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
