Instruction/ maintenance manual of the product TE100S24G TRENDnet
Go to page of 12
Fiber Converters Quick Installation Guide (1) Fiber Converters /10.30.2012.
Minimum Requirements Package Contents 1. Before Y ou Start 1 Optional Equipment TFC-1600 chassis (optional) or sturdy , level surface that can support the weight of the Fiber Converter 1 0/100 Mbps Ethernet switch Fiber cables compatible with the fiber converter's connector and media specifications Cat.
2 Note : For the TFC-1 10MM/MST/MSC/1 10S15/S15i/S30/S30i/S60/S60i/S100, the TX and RX cables must be reversed on the opposite fiber connection TFC-15MS100 converts Multi-Mode to Single-Mode fiber , it can be connected to a switch with Multi-Mode SC-type fiber connection (e.
3 3. Slide the fiber converter into an available slot and fasten the thumbscrew . 2. Unfasten the thumbscrew and remove the fiber converter from the metal casing. Installing Fiber Converter in a Chassis 1. Unscrew the bay cover from the desired bay on the chassis.
4 N/ A N/ A N/ A N/ A N/ A N/ A N/ A Green N/ A N/ A N/ A N/ A N/ A N/ A N/ A Off Blinking TFC-110S15i/30i/60i TFC-110MM/MST/MSC/ 110S15/S30/S60/S100 /20D3/ S20D5/ 20D3i/20D5i/40D3i/ 40D5i PWR (Power).
5 TFC-110S15i/30i/60i/20D3i/20D5i/40D3i/40D5i TFC-110MM/MST/MSC/ 110S15/S30/S60/S100 Fiber Half-Duplex On Half-Duplex 1 Fiber Full-Duplex Off Full-Duplex N/ A TX 10M 2 3 4 5 6 On Off On Off On Off On .
6 4. T echnical Specifications Media MMF MMF 1300nm 1300nm 1300nm 13 1 0nm 155 0nm 131 0nm 131 0nm 131 0nm 15 50nm 15 50nm 15 50nm 1310 nm -19 14 -32 -14 -19 14 -32 -14 -23.
TFC-110MSC,TFC-110MST,TFC-110MM,TFC-15MS100,TFC-110S15, TFC-110S30,TFC-110S60,TFC-110S100, TFC-110S15i , TFC-110S30i , TFC-110S60i ,TFC-110S20D3,TFC-110S20.
GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT W ARRANTY and are subject to the copyrights of the developers.
GPL/LGPL üldinformatsioon See TRENDneti toode sisaldab vaba tarkvara, mis on kirjutatud kolmanda osapoole poolt. Koodid on allutatud GNU (General Public License) Üldise Avaliku Litsentsi (GPL) või GNU (Lesser General Public License) ("LGPL") Vähem Üldine Avalik Litsentsiga.
Fiber Converters Fiber Converters /10.30.2012.
Fiber Converters Fiber Converters /10.30.2012.
An important point after buying a device TRENDnet TE100S24G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TRENDnet TE100S24G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TRENDnet TE100S24G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TRENDnet TE100S24G you will learn all the available features of the product, as well as information on its operation. The information that you get TRENDnet TE100S24G will certainly help you make a decision on the purchase.
If you already are a holder of TRENDnet TE100S24G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TRENDnet TE100S24G.
However, one of the most important roles played by the user manual is to help in solving problems with TRENDnet TE100S24G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TRENDnet TE100S24G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
