Instruction/ maintenance manual of the product SPOEB10XX-100 Transition Networks
Go to page of 9
SPOEB10xx-100 User’ s Guide • Stand-Alone Media Converter • Power Over Ethernet • 10/100Base-TX to 100Base-FX The SPOEB10xx-1xx Power over Ethernet (POE) is a two port 10/100Base-TX to 100Base.
2 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 SPOEB1029-100 RJ-45 100 m (328 ft.)* SC, 1310Tx/1550Rx nm single mode 20 km (12.4 miles) SPOEB1029-101 RJ-45 100 m (328 ft.)* SC, 1550Tx/1310Rx nm single mode 20 km (12.
4 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- continued Eight-position configur ation switc h -- continued 2 - Speed Up - Forces 100 Mb/s on the copper port. Down - Forces 10 Mb/s on the copper port.
6 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation- C ontinued Far-End Fault (always enabled) This troubleshooting feature generally used in conjunction with Link Pass Through to notify both end devices of a link loss.
8 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- C ontinued P ow er ov er Ethernet (P oE) The SPOEB10xx-1xx media converter transmits electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network.
10 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications The cable’s physical characteristics must meet or exceed IEEE 802.3™ specifications. Copper cable Category 5: (Minimum Requirement) Gauge 24 to 22 AWG Attenuation 22.
12 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T echnical Specifications For use with Transition Networks Model SPOEB10xx-100 or equivalent Standards IEEE 802.3, IEEE 802.3af Data Rate 10/100 Mb/s Packet Size (Max) 1522 bytes Mac Address 2K Dimensions 3.
14 SPOEB10xx-1xx 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T roubleshooting -- continued 5. Is data being passed through the device? NO • Ensure the Powered Device (PD) IEEE 802.3af compliant. • Ensure the load to the Powered Device (PD) is less than 0.
16 Trademark Notice All registered trademarks and trademarks are the property of their respective owners. Copyright Restrictions © 2004 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks.
An important point after buying a device Transition Networks SPOEB10XX-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks SPOEB10XX-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks SPOEB10XX-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks SPOEB10XX-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks SPOEB10XX-100 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks SPOEB10XX-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks SPOEB10XX-100.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks SPOEB10XX-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks SPOEB10XX-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
