Instruction/ maintenance manual of the product SISTF10xx-130-LR(T) Transition Networks
Go to page of 9
User’ s Guide SISTF10xx-130-LR(T) Stand-Alone Redundant Ring Industrial Switch • Copper to Fiber • Ethernet / Fast Ethernet • 10Base-T / 100Base-TX to 100Base-FX • Extended Temperature • Hazardous Environment * Typical maximum cable distance.
2 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 NOTE: This device is intended to be grounded to a well-grounded mounting surface such as a metal plate. Install the grounding wire prior to connecting any other device.
4 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued CAUTION: Disconnect the SISTF10xx-130-LR(T) from the DC power source BEFORE installing and/or wiring the device.
V2- V1- V1+ V2+ PWR2 FA U L T PWR1 The screws to secure the wires are located on the side of the terminal block. fault contacts 6 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- Inter.
8 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation Status LEDs Use the status LEDs to monitor the SISTF10xx-130-LR(T) in the network. The three LEDs near the top indicate the power and fault status: PWR1 (amber) on = Primary power is connected to device.
10 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications -- Continued Copper Cable Category 5: (minimum requirement) Gauge: 24 to 22 AWG Attenuation: 22.0 dB /100m @ 100 MHz Maximum Cable Distance: 100 meters • Straight-through OR crossover cable may be used.
12 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T echnical Specifications For use with Transition Networks Model SISTF10xx-130-LR(T) or equivalent Standards: IEEE 802.3™, 802.3u™; 802.3x™ Data Rate: 10 Mb/s, 100 Mb/s (copper); 100 Mb/s (fiber) Processing Type: Store and Forward w/ IEEE802.
14 SISTF10xx-130-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T r oubleshooting If the device fails, isolate and correct the fault by determining the answers to the following questions and then taking the indicated action: 1.
CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.
An important point after buying a device Transition Networks SISTF10xx-130-LR(T) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks SISTF10xx-130-LR(T) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks SISTF10xx-130-LR(T) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks SISTF10xx-130-LR(T) you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks SISTF10xx-130-LR(T) will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks SISTF10xx-130-LR(T), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks SISTF10xx-130-LR(T).
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks SISTF10xx-130-LR(T). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks SISTF10xx-130-LR(T) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
