Instruction/ maintenance manual of the product SIBTF10XX-1XX-MR Transition Networks
Go to page of 15
User ’ s Guide SIBTF10xx-1xx-MR & SIBTF10xx-1xx-MS Substation-Rated Industrial Ethernet Switch • 10/100Base-TX to 100Base-FX • Single or Redundant Wide Input Power Supply The SIBTF10xx-1xx-M.
2 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Available SIBTF10xx-140-MR and MS models* *MR = Redundant power-supply terminal blocks, MS = Single power-supply terminal block. Note: The cable distances listed are maximum distances typically.
4 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation F eatures • The SIBTF10xx-140-MR industrial switch includes four (4) RJ-45, twisted-pair copper ports and one (1) 100 Mb fiber optic port.
6 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Figure 3: SIBTF10xx-110-MR Front Panel Installation -- continued F eatures -- continued • The SIBTF10xx-110-MS industrial switch includes one (1) RJ-45, twisted-pair copper port and one (1) 100 Mb fiber optic port.
8 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- continued DIP switc h settings 1. Port 1 copper Auto-Negotiation: UP (Enabled) - Advertises switch speed and mode capabilities to the network: • 100Mb/s full-duplex • 100Mb/s half-duplex, • 10Mb/s full-duplex • 10Mb/s half-duplex.
10 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- continued Note: DO NOT use bare (exposed) or un-lugged power-source wires to connect to the industrial switch.
Installation -- continued Internal rela y connections The internal relay can activate an external fault indicator. The fault indicator connects to the relay contacts on the front panel. An example would be a fault circuit connected to a warning light located in a control room.
14 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Installation -- continued Installing fiber cable To install a fiber cable, view Figure 10, and then do the following: 1. Locate or build 100Base-FX fiber cable with male, two-stranded TX to RX connectors installed at both ends.
16 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Oper ation -- continued C opper/fiber status LEDs -- continued Copper LEDs The function of the copper port LEDs (1, 2, 3, and 4) are as follows: 100MB ON The copper port has established a link at 100 MB/s.
18 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Oper ation -- continued Product features -- continued Auto-Negotiation The Auto-Negotiation feature allows the SIBTF10xx-1xx industrial switch to configure itself to achieve the best possible mode of operation over a link automatically.
techsupport@transition.com -- Click the “Transition Now” link for a live Web chat. 21 C able Specifications -- continued SIBTF1013-1xx-Mx 1300 nm multimode Fiber Optic Transmitter Power: min: -19.0 dBm max: -14.0 dBm Fiber Optic Receiver Sensitivity: min: -30.
22 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 T echnical Specifications For use with Transition Networks Model SIBTF10xx-1xx-Mx or equivalent. Standards: IEEE 802.3™ 2000, IEEE 802.3x™ Data Rate: 10 Mb/s, 100 Mb/s (copper) , 100 Mb/s (fiber) Dimensions: Models 130- & 140-Mx (W x H x D) 4.
24 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Standard Description Compliance Level Remarks IEEE1613, Power Substation Testing -- Continued IEEE1613, Clause 7.
26 SIBTF10xx-1xx-Mx 24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600 Contact Us Technical support Technical support is available 24 hours a day. US and Canada: 1-800-260-1312 International: 00-1-952-941-7600 Transition now Chat live via the Web with Transition Networks Technical Support.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or means (graphic, electronic, mechanical) without written permission from Transition Networks.
An important point after buying a device Transition Networks SIBTF10XX-1XX-MR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks SIBTF10XX-1XX-MR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks SIBTF10XX-1XX-MR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks SIBTF10XX-1XX-MR you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks SIBTF10XX-1XX-MR will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks SIBTF10XX-1XX-MR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks SIBTF10XX-1XX-MR.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks SIBTF10XX-1XX-MR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks SIBTF10XX-1XX-MR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
