Instruction/ maintenance manual of the product SBFTF1011-120 Transition Networks
Go to page of 9
Part Number Copper - five (5) ports 10Base-T/100Base-TX Duplex Fiber-Optic - one (1) port 100Base-FX SBFTF1011-120 RJ-45 100 m (328 ft)* ST, 1300 nm multimode 2 km (1.2 miles)* SBFTF1013-120 RJ-45 100 m (328 ft)* SC, 1300 nm multimode 2 km (1.2 miles)* SBFTF1014-120 RJ-45 100 m (328 ft)* SC, 1310 nm single mode 20 km (12.
2 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network.
4 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Set the Dip Switches -- Continued NOTE: Dip switch 4 (in the “SW” set) applies to fiber port 1 (F1).
6 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued • If half-duplex mode is used, refer to the 512-Bit Rule (see page 9). • If full-duplex mode is used, the 512-Bit Rule does not apply.
8 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation Status LEDs Use the status LEDs next to the fiber ports to monitor the media converter and the fiber network connections. F(ull) D(uplex) On = Full-duplex connection.
10 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation -- Continued Product Features -- Continued Rate Conversion The SBFTF10xx-12x media converter a.
12 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications -- Continued Copper Cable Category 3: (Minimum requirement for 10 Mb/s operation) Gauge 24 to 22 AWG Attenuation 11.
14 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T r oubleshooting If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1.
Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2001-2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks.
An important point after buying a device Transition Networks SBFTF1011-120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks SBFTF1011-120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks SBFTF1011-120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks SBFTF1011-120 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks SBFTF1011-120 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks SBFTF1011-120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks SBFTF1011-120.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks SBFTF1011-120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks SBFTF1011-120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
