Instruction/ maintenance manual of the product E-TBT-HB-0804 Transition Networks
Go to page of 12
LANMaster™ T8 (E-TBT -HB-0804) 33022.B For assistance in installing, using, or maintaining the TRANSITION Networks LANMaster T8 8-Port Ethernet™ Repeater Hub, contact TRANSITION Networks T echnical Support at: (800) 260-1312 or contact your local distributor .
LANMaster™ T8 8-Port Ethernet™ Repeater Hub 20 CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network.
LANMaster™ T8 8-Port Ethernet™ Repeater Hub T able of Contents 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The LANMaster T8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Networking the LANMaster T8 . . . .
LANMaster™ T8 8-Port Ethernet™ Repeater Hub 18 1 1. INTRODUCTION This guide is intended for the system or network administrator responsible for installing and monitoring a TRANSITION Networks LANMaster™ T8 8-Port Ethernet™ Repeater Hub.
LANMaster™ T8 8-Port Ethernet™ Repeater Hub 2 17 Networking the LANMaster T8 The LANMaster T8 Repeater Hub can be installed in an Ethernet network by connecting 10BASE-T cable between RJ-45 connectors at the front of the LANMaster T8 and various network terminal devices.
LANMaster™ T8 8-Port Ethernet™ Repeater Hub 16 3 Connectors and Indicators CONNECTORS Eight (8) straight-through RJ-45 connectors , labeled 1-8, and one (1) crossover RJ-45 connector , labeled X, are located on the front of the LANMaster T8.
LANMaster™ T8 8-Port Ethernet™ Repeater Hub 4 15 4. OPERA TION The LANMaster T8 requires no intervention beyond occasionally monitoring the Power and Status LEDs. Monitoring Status LEDs Steady green Act(ivity) LED indicates connection of the LANMaster T8 to external AC powerr.
LANMaster™ T8 8-Port Ethernet™ Repeater Hub 14 5 Powering the LANMaster T8 To power ON the LANMaster T8: 1. Verify that the LANMaster T8 power supply adapter is the correct one for the site installation. 2. At LANMaster T8 back, locate the power receptacle.
LANMaster™ T8 8-Port Ethernet™ Repeater Hub 6 13 Installing LANMaster T8 at Site NOTE: Mounting brackets, screws, and rubber feet are provided. To install the LANMaster T8 on table or other flat surface : 1. Carefully turn LANMaster T8 to side. 2.
LANMaster™ T8 8-Port Ethernet™ Repeater Hub 12 7 Installing Network Cable 10BASE-T Requirements STRAIGHT-THROUGH/CROSSOVER CABLE/CONNECTOR NOTE: The 10BASE-T cable and RJ-45 jacks for hub to terminal device connections must be configured as straight through .
LANMaster™ T8 8-Port Ethernet™ Repeater Hub Installing T wisted-Pair 10BASE-T Cable To connect 10BASE-T Cable to LANMaster T8 RJ-45 connectors: 1. Locate or build 10BASE-T cables that are: • 802.3 compliant (See page 20.) • with straight through connector/cable configuration (See page 7.
LANMaster™ T8 8-Port Ethernet™ Repeater Hub 10 9 10-Mb/s Baseband Network Configuration Guidelines Ethernet 802.3 specifications define network configuration guidelines for the 10-Mb/s baseband ne.
An important point after buying a device Transition Networks E-TBT-HB-0804 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Transition Networks E-TBT-HB-0804 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Transition Networks E-TBT-HB-0804 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Transition Networks E-TBT-HB-0804 you will learn all the available features of the product, as well as information on its operation. The information that you get Transition Networks E-TBT-HB-0804 will certainly help you make a decision on the purchase.
If you already are a holder of Transition Networks E-TBT-HB-0804, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Transition Networks E-TBT-HB-0804.
However, one of the most important roles played by the user manual is to help in solving problems with Transition Networks E-TBT-HB-0804. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Transition Networks E-TBT-HB-0804 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
